This article is more than one year old. Older articles may contain outdated content. Check that the information in the page has not become incorrect since its publication.

Deploying PostgreSQL Clusters using StatefulSets

Editor’s note: Today’s guest post is by Jeff McCormick, a developer at Crunchy Data, showing how to build a PostgreSQL cluster using the new Kubernetes StatefulSet feature.

In an earlier post, I described how to deploy a PostgreSQL cluster using Helm, a Kubernetes package manager. The following example provides the steps for building a PostgreSQL cluster using the new Kubernetes StatefulSets feature.

StatefulSets Example

Step 1 - Create Kubernetes Environment

StatefulSets is a new feature implemented in Kubernetes 1.5 (prior versions it was known as PetSets). As a result, running this example will require an environment based on Kubernetes 1.5.0 or above.

The example in this blog deploys on Centos7 using kubeadm. Some instructions on what kubeadm provides and how to deploy a Kubernetes cluster is located here.

Step 2 - Install NFS

The example in this blog uses NFS for the Persistent Volumes, but any shared file system would also work (ex: ceph, gluster).

The example script assumes your NFS server is running locally and your hostname resolves to a known IP address.

In summary, the steps used to get NFS working on a Centos 7 host are as follows:

sudo setsebool -P virt\_use\_nfs 1

sudo yum -y install nfs-utils libnfsidmap

sudo systemctl enable rpcbind nfs-server

sudo systemctl start rpcbind nfs-server rpc-statd nfs-idmapd

sudo mkdir /nfsfileshare

sudo chmod 777 /nfsfileshare/

sudo vi /etc/exports

sudo exportfs -r

The /etc/exports file should contain a line similar to this one except with the applicable IP address specified:

/nfsfileshare 192.168.122.9(rw,sync)

After these steps NFS should be running in the test environment.

Step 3 - Clone the Crunchy PostgreSQL Container Suite

The example used in this blog is found at in the Crunchy Containers GitHub repo here. Clone the Crunchy Containers repository to your test Kubernertes host and go to the example:

cd $HOME

git clone https://github.com/CrunchyData/crunchy-containers.git

cd crunchy-containers/examples/kube/statefulset

Next, pull down the Crunchy PostgreSQL container image:

docker pull crunchydata/crunchy-postgres:centos7-9.5-1.2.6

Step 4 - Run the Example

To begin, it is necessary to set a few of the environment variables used in the example:

export BUILDBASE=$HOME/crunchy-containers

export CCP\_IMAGE\_TAG=centos7-9.5-1.2.6

BUILDBASE is where you cloned the repository and CCP_IMAGE_TAG is the container image version we want to use.

Next, run the example:

./run.sh

That script will create several Kubernetes objects including:

  • Persistent Volumes (pv1, pv2, pv3)
  • Persistent Volume Claim (pgset-pvc)
  • Service Account (pgset-sa)
  • Services (pgset, pgset-master, pgset-replica)
  • StatefulSet (pgset)
  • Pods (pgset-0, pgset-1)

At this point, two pods will be running in the Kubernetes environment:

$ kubectl get pod

NAME      READY     STATUS    RESTARTS   AGE

pgset-0   1/1       Running   0          2m

pgset-1   1/1       Running   1          2m

Immediately after the pods are created, the deployment will be as depicted below:

Step 5 - What Just Happened?

This example will deploy a StatefulSet, which in turn creates two pods.

The containers in those two pods run the PostgreSQL database. For a PostgreSQL cluster, we need one of the containers to assume the master role and the other containers to assume the replica role.

So, how do the containers determine who will be the master, and who will be the replica?

This is where the new StateSet mechanics come into play. The StateSet mechanics assign a unique ordinal value to each pod in the set.

The StatefulSets provided unique ordinal value always start with 0. During the initialization of the container, each container examines its assigned ordinal value. An ordinal value of 0 causes the container to assume the master role within the PostgreSQL cluster. For all other ordinal values, the container assumes a replica role. This is a very simple form of discovery made possible by the StatefulSet mechanics.

PostgreSQL replicas are configured to connect to the master database via a Service dedicated to the master database. In order to support this replication, the example creates a separate Service for each of the master role and the replica role. Once the replica has connected, the replica will begin replicating state from the master.

During the container initialization, a master container will use a Service Account (pgset-sa) to change it’s container label value to match the master Service selector. Changing the label is important to enable traffic destined to the master database to reach the correct container within the Stateful Set. All other pods in the set assume the replica Service label by default.

Step 6 - Deployment Diagram

The example results in a deployment depicted below:

In this deployment, there is a Service for the master and a separate Service for the replica. The replica is connected to the master and replication of state has started.

The Crunchy PostgreSQL container supports other forms of cluster deployment, the style of deployment is dictated by setting the PG_MODE environment variable for the container. In the case of a StatefulSet deployment, that value is set to: PG_MODE=set

This environment variable is a hint to the container initialization logic as to the style of deployment we intend.

Step 7 - Testing the Example

The tests below assume that the psql client has been installed on the test system. If not, the psql client has been previously installed, it can be installed as follows:

sudo yum -y install postgresql

In addition, the tests below assume that the tested environment DNS resolves to the Kube DNS and that the tested environment DNS search path is specified to match the applicable Kube namespace and domain. The master service is named pgset-master and the replica service is named pgset-replica.

Test the master as follows (the password is password):

psql -h pgset-master -U postgres postgres -c 'table pg\_stat\_replication'

If things are working, the command above will return output indicating that a single replica is connecting to the master.

Next, test the replica as follows:

psql -h pgset-replica -U postgres postgres  -c 'create table foo (id int)'

The command above should fail as the replica is read-only within a PostgreSQL cluster.

Next, scale up the set as follows:

kubectl scale statefulset pgset --replicas=3

The command above should successfully create a new replica pod called pgset-2 as depicted below:

Step 8 - Persistence Explained

Take a look at the persisted PostgreSQL data files on the resulting NFS mount path:

$ ls -l /nfsfileshare/

total 12

drwx------ 20   26   26 4096 Jan 17 16:35 pgset-0

drwx------ 20   26   26 4096 Jan 17 16:35 pgset-1

drwx------ 20   26   26 4096 Jan 17 16:48 pgset-2

Each container in the stateful set binds to the single NFS Persistent Volume Claim (pgset-pvc) created in the example script.

Since NFS and the PVC can be shared, each pod can write to this NFS path.

The container is designed to create a subdirectory on that path using the pod host name for uniqueness.

Conclusion

StatefulSets is an exciting feature added to Kubernetes for container builders that are implementing clustering. The ordinal values assigned to the set provide a very simple mechanism to make clustering decisions when deploying a PostgreSQL cluster.

--Jeff McCormick, Developer, Crunchy Data