Instructions for setting up a Kubernetes cluster.

Edit This Page

Running Kubernetes on CenturyLink Cloud

These scripts handle the creation, deletion and expansion of Kubernetes clusters on CenturyLink Cloud.

You can accomplish all these tasks with a single command. We have made the Ansible playbooks used to perform these tasks available here.

Find Help

If you run into any problems or want help with anything, we are here to help. Reach out to use via any of the following ways: - Submit a github issue - Send an email to Kubernetes AT ctl DOT io - Visit

Clusters of VMs or Physical Servers, your choice.


The requirements to run this script are: - A linux administrative host (tested on ubuntu and OSX) - python 2 (tested on 2.7.11) - pip (installed with python as of 2.7.9) - git - A CenturyLink Cloud account with rights to create new hosts - An active VPN connection to the CenturyLink Cloud from your linux host

Script Installation

After you have all the requirements met, please follow these instructions to install this script.

1) Clone this repository and cd into it.

git clone

2) Install all requirements, including * Ansible * CenturyLink Cloud SDK * Ansible Modules

sudo pip install -r ansible/requirements.txt

3) Create the credentials file from the template and use it to set your ENV variables

cp ansible/ ansible/
vi ansible/
source ansible/

4) Grant your machine access to the CenturyLink Cloud network by using a VM inside the network or configuring a VPN connection to the CenturyLink Cloud network.

Script Installation Example: Ubuntu 14 Walkthrough

If you use an ubuntu 14, for your convenience we have provided a step by step guide to install the requirements and install the script.

  # system
 apt-get update
 apt-get install -y git python python-crypto
 curl -O

  # installing this repository
 mkdir -p ~home/k8s-on-clc
 cd ~home/k8s-on-clc
 git clone
 cd adm-kubernetes-on-clc/
 pip install -r requirements.txt

  # getting started
 cd ansible
 cp; vi

Cluster Creation

To create a new Kubernetes cluster, simply run the script. A complete list of script options and some examples are listed below.

CLC_CLUSTER_NAME=[name of kubernetes cluster]
cd ./adm-kubernetes-on-clc

It takes about 15 minutes to create the cluster. Once the script completes, it will output some commands that will help you setup kubectl on your machine to point to the new cluster.

When the cluster creation is complete, the configuration files for it are stored locally on your administrative host, in the following directory


Cluster Creation: Script Options

Usage: [OPTIONS]
Create servers in the CenturyLinkCloud environment and initialize a Kubernetes cluster
Environment variables CLC_V2_API_USERNAME and CLC_V2_API_PASSWD must be set in
order to access the CenturyLinkCloud API

All options (both short and long form) require arguments, and must include "="
between option name and option value.

     -h (--help)                   display this help and exit
     -c= (--clc_cluster_name=)     set the name of the cluster, as used in CLC group names
     -t= (--minion_type=)          standard -> VM (default), bareMetal -> physical]
     -d= (--datacenter=)           VA1 (default)
     -m= (--minion_count=)         number of kubernetes minion nodes
     -mem= (--vm_memory=)          number of GB ram for each minion
     -cpu= (--vm_cpu=)             number of virtual cps for each minion node
     -phyid= (--server_conf_id=)   physical server configuration id, one of
                                      physical_server_4_core_conf_id (default)
     -etcd_separate_cluster=yes    create a separate cluster of three etcd nodes,
                                   otherwise run etcd on the master node

Cluster Expansion

To expand an existing Kubernetes cluster, run the script. A complete list of script options and some examples are listed [below]. This script must be run from the same host that created the cluster (or a host that has the cluster artifact files stored in ~/.clc_kube/$cluster_name).

cd ./adm-kubernetes-on-clc
bash -c="name_of_kubernetes_cluster" -m=2

Cluster Expansion: Script Options

Usage: [OPTIONS]
Create servers in the CenturyLinkCloud environment and add to an
existing CLC kubernetes cluster

Environment variables CLC_V2_API_USERNAME and CLC_V2_API_PASSWD must be set in
order to access the CenturyLinkCloud API

     -h (--help)                   display this help and exit
     -c= (--clc_cluster_name=)     set the name of the cluster, as used in CLC group names
     -m= (--minion_count=)         number of kubernetes minion nodes to add

Cluster Deletion

There are two ways to delete an existing cluster:

1) Use our python script:

python --cluster=clc_cluster_name --datacenter=DC1

2) Use the CenturyLink Cloud UI. To delete a cluster, log into the CenturyLink Cloud control portal and delete the parent server group that contains the Kubernetes Cluster. We hope to add a scripted option to do this soon.


Create a cluster with name of k8s_1, 1 master node and 3 worker minions (on physical machines), in VA1

 bash --clc_cluster_name=k8s_1 --minion_type=bareMetal --minion_count=3 --datacenter=VA1

Create a cluster with name of k8s_2, an ha etcd cluster on 3 VMs and 6 worker minions (on VMs), in VA1

 bash --clc_cluster_name=k8s_2 --minion_type=standard --minion_count=6 --datacenter=VA1 --etcd_separate_cluster=yes

Create a cluster with name of k8s_3, 1 master node, and 10 worker minions (on VMs) with higher mem/cpu, in UC1:

  bash --clc_cluster_name=k8s_3 --minion_type=standard --minion_count=10 --datacenter=VA1 -mem=6 -cpu=4

Cluster Features and Architecture

We configure the Kubernetes cluster with the following features:

We use the following to create the Kubernetes cluster:

Optional add-ons

Cluster management

The most widely used tool for managing a Kubernetes cluster is the command-line utility kubectl. If you do not already have a copy of this binary on your administrative machine, you may run the script which will download it and install it in /usr/bin/local.

The script requires that the environment variable CLC_CLUSTER_NAME be defined also writes a configuration file which will embed the necessary authentication certificates for the particular cluster. The configuration file is written to the ${CLC_CLUSTER_HOME}/kube directory

export KUBECONFIG=${CLC_CLUSTER_HOME}/kube/config
kubectl version
kubectl cluster-info

Accessing the cluster programmatically

It’s possible to use the locally stored client certificates to access the apiserver. For example, you may want to use any of the Kubernetes API client libraries to program against your Kubernetes cluster in the programming language of your choice.

To demonstrate how to use these locally stored certificates, we provide the following example of using curl to communicate to the master apiserver via https:

curl \
   --cacert ${CLC_CLUSTER_HOME}/pki/ca.crt  \
   --key ${CLC_CLUSTER_HOME}/pki/kubecfg.key \
   --cert ${CLC_CLUSTER_HOME}/pki/kubecfg.crt  https://${MASTER_IP}:6443

But please note, this does not work out of the box with the curl binary distributed with OSX.

Accessing the cluster with a browser

We install two UIs on Kubernetes. The original KubeUI and the newer kube dashboard. When you create a cluster, the script should output URLs for these interfaces like this:

KubeUI is running at https://${MASTER_IP}:6443/api/v1/namespaces/kube-system/services/kube-ui/proxy kubernetes-dashboard is running at https://${MASTER_IP}:6443/api/v1/namespaces/kube-system/services/kubernetes-dashboard/proxy

Note on Authentication to the UIs: The cluster is set up to use basic authentication for the user admin. Hitting the url at https://${MASTER_IP}:6443 will require accepting the self-signed certificate from the apiserver, and then presenting the admin password written to file at:

> _${CLC_CLUSTER_HOME}/kube/admin_password.txt_

Configuration files

Various configuration files are written into the home directory CLC_CLUSTER_HOME under .clc_kube/${CLC_CLUSTER_NAME} in several subdirectories. You can use these files to access the cluster from machines other than where you created the cluster from.

kubectl usage examples

There are a great many features of kubectl. Here are a few examples

List existing nodes, pods, services and more, in all namespaces, or in just one:

kubectl get nodes
kubectl get --all-namespaces services
kubectl get --namespace=kube-system replicationcontrollers

The Kubernetes API server exposes services on web URLs, which are protected by requiring client certificates. If you run a kubectl proxy locally, kubectl will provide the necessary certificates and serve locally over http.

kubectl proxy -p 8001

Then, you can access urls like without the need for client certificates in your browser.

These are the known items that don’t work on CenturyLink cloud but do work on other cloud providers:

Ansible Files

If you want more information about our Ansible files, please read this file

Further reading

Please see the Kubernetes docs for more details on administering and using a Kubernetes cluster.


Create an Issue Edit this Page