kube-scheduler Configuration (v1beta2)
DefaultPreemptionArgs holds arguments used to configure the DefaultPreemption plugin.
MinCandidateNodesPercentage is the minimum number of candidates to shortlist when dry running preemption as a percentage of number of nodes. Must be in the range [0, 100]. Defaults to 10% of the cluster size if unspecified.
MinCandidateNodesAbsolute is the absolute minimum number of candidates to shortlist. The likely number of candidates enumerated for dry running preemption is given by the formula: numCandidates = max(numNodes * minCandidateNodesPercentage, minCandidateNodesAbsolute) We say "likely" because there are other factors such as PDB violations that play a role in the number of candidates shortlisted. Must be at least 0 nodes. Defaults to 100 nodes if unspecified.
InterPodAffinityArgs holds arguments used to configure the InterPodAffinity plugin.
HardPodAffinityWeight is the scoring weight for existing pods with a matching hard affinity to the incoming pod.
KubeSchedulerConfiguration configures a scheduler
Parallelism defines the amount of parallelism in algorithms for scheduling a Pods. Must be greater than 0. Defaults to 16
LeaderElection defines the configuration of leader election client.
ClientConnection specifies the kubeconfig file and client connection settings for the proxy server to use when communicating with the apiserver.
Note: Both HealthzBindAddress and MetricsBindAddress fields are deprecated. Only empty address or port 0 is allowed. Anything else will fail validation. HealthzBindAddress is the IP address and port for the health check server to serve on.
MetricsBindAddress is the IP address and port for the metrics server to serve on.
|(Members of |
DebuggingConfiguration holds configuration for Debugging related features TODO: We might wanna make this a substruct like Debugging componentbaseconfigv1alpha1.DebuggingConfiguration
PercentageOfNodesToScore is the percentage of all nodes that once found feasible for running a pod, the scheduler stops its search for more feasible nodes in the cluster. This helps improve scheduler's performance. Scheduler always tries to find at least "minFeasibleNodesToFind" feasible nodes no matter what the value of this flag is. Example: if the cluster size is 500 nodes and the value of this flag is 30, then scheduler stops finding further feasible nodes once it finds 150 feasible ones. When the value is 0, default percentage (5%--50% based on the size of the cluster) of the nodes will be scored.
PodInitialBackoffSeconds is the initial backoff for unschedulable pods. If specified, it must be greater than 0. If this value is null, the default value (1s) will be used.
PodMaxBackoffSeconds is the max backoff for unschedulable pods. If specified, it must be greater than podInitialBackoffSeconds. If this value is null, the default value (10s) will be used.
Profiles are scheduling profiles that kube-scheduler supports. Pods can choose to be scheduled under a particular profile by setting its associated scheduler name. Pods that don't specify any scheduler name are scheduled with the "default-scheduler" profile, if present here.
Extenders are the list of scheduler extenders, each holding the values of how to communicate with the extender. These extenders are shared by all scheduler profiles.
NodeAffinityArgs holds arguments to configure the NodeAffinity plugin.
AddedAffinity is applied to all Pods additionally to the NodeAffinity specified in the PodSpec. That is, Nodes need to satisfy AddedAffinity AND .spec.NodeAffinity. AddedAffinity is empty by default (all Nodes match). When AddedAffinity is used, some Pods with affinity requirements that match a specific Node (such as Daemonset Pods) might remain unschedulable.
NodeResourcesBalancedAllocationArgs holds arguments used to configure NodeResourcesBalancedAllocation plugin.
Resources to be managed, the default is "cpu" and "memory" if not specified.
NodeResourcesFitArgs holds arguments used to configure the NodeResourcesFit plugin.
IgnoredResources is the list of resources that NodeResources fit filter should ignore. This doesn't apply to scoring.
IgnoredResourceGroups defines the list of resource groups that NodeResources fit filter should ignore. e.g. if group is ["example.com"], it will ignore all resource names that begin with "example.com", such as "example.com/aaa" and "example.com/bbb". A resource group name can't contain '/'. This doesn't apply to scoring.
ScoringStrategy selects the node resource scoring strategy. The default strategy is LeastAllocated with an equal "cpu" and "memory" weight.
PodTopologySpreadArgs holds arguments used to configure the PodTopologySpread plugin.
DefaultConstraints defines topology spread constraints to be applied to
Pods that don't define any in
DefaultingType determines how .defaultConstraints are deduced. Can be one of "System" or "List".
Defaults to "System".
VolumeBindingArgs holds arguments used to configure the VolumeBinding plugin.
BindTimeoutSeconds is the timeout in seconds in volume binding operation. Value must be non-negative integer. The value zero indicates no waiting. If this value is nil, the default value (600) will be used.
Shape specifies the points defining the score function shape, which is used to score nodes based on the utilization of statically provisioned PVs. The utilization is calculated by dividing the total requested storage of the pod by the total capacity of feasible PVs on each node. Each point contains utilization (ranges from 0 to 100) and its associated score (ranges from 0 to 10). You can turn the priority by specifying different scores for different utilization numbers. The default shape points are:
Extender holds the parameters used to communicate with the extender. If a verb is unspecified/empty, it is assumed that the extender chose not to provide that extension.
URLPrefix at which the extender is available
Verb for the filter call, empty if not supported. This verb is appended to the URLPrefix when issuing the filter call to extender.
Verb for the preempt call, empty if not supported. This verb is appended to the URLPrefix when issuing the preempt call to extender.
Verb for the prioritize call, empty if not supported. This verb is appended to the URLPrefix when issuing the prioritize call to extender.
The numeric multiplier for the node scores that the prioritize call generates. The weight should be a positive integer
Verb for the bind call, empty if not supported. This verb is appended to the URLPrefix when issuing the bind call to extender. If this method is implemented by the extender, it is the extender's responsibility to bind the pod to apiserver. Only one extender can implement this function.
EnableHTTPS specifies whether https should be used to communicate with the extender
TLSConfig specifies the transport layer security config
HTTPTimeout specifies the timeout duration for a call to the extender. Filter timeout fails the scheduling of the pod. Prioritize timeout is ignored, k8s/other extenders priorities are used to select the node.
NodeCacheCapable specifies that the extender is capable of caching node information, so the scheduler should only send minimal information about the eligible nodes assuming that the extender already cached full details of all nodes in the cluster
ManagedResources is a list of extended resources that are managed by this extender.
Ignorable specifies if the extender is ignorable, i.e. scheduling should not fail when the extender returns an error or is not reachable.
ExtenderManagedResource describes the arguments of extended resources managed by an extender.
Name is the extended resource name.
IgnoredByScheduler indicates whether kube-scheduler should ignore this resource when applying predicates.
ExtenderTLSConfig contains settings to enable TLS with extender
Server should be accessed without verifying the TLS certificate. For testing only.
ServerName is passed to the server for SNI and is used in the client to check server certificates against. If ServerName is empty, the hostname used to contact the server is used.
Server requires TLS client certificate authentication
Server requires TLS client certificate authentication
Trusted root certificates for server
CertData holds PEM-encoded bytes (typically read from a client certificate file). CertData takes precedence over CertFile
KeyData holds PEM-encoded bytes (typically read from a client certificate key file). KeyData takes precedence over KeyFile
CAData holds PEM-encoded bytes (typically read from a root certificates bundle). CAData takes precedence over CAFile
KubeSchedulerProfile is a scheduling profile.
SchedulerName is the name of the scheduler associated to this profile. If SchedulerName matches with the pod's "spec.schedulerName", then the pod is scheduled with this profile.
Plugins specify the set of plugins that should be enabled or disabled. Enabled plugins are the ones that should be enabled in addition to the default plugins. Disabled plugins are any of the default plugins that should be disabled. When no enabled or disabled plugin is specified for an extension point, default plugins for that extension point will be used if there is any. If a QueueSort plugin is specified, the same QueueSort Plugin and PluginConfig must be specified for all profiles.
PluginConfig is an optional set of custom plugin arguments for each plugin. Omitting config args for a plugin is equivalent to using the default config for that plugin.
Plugin specifies a plugin name and its weight when applicable. Weight is used only for Score plugins.
Name defines the name of plugin
Weight defines the weight of plugin, only used for Score plugins.
PluginConfig specifies arguments that should be passed to a plugin at the time of initialization. A plugin that is invoked at multiple extension points is initialized once. Args can have arbitrary structure. It is up to the plugin to process these Args.
Name defines the name of plugin being configured
Args defines the arguments passed to the plugins at the time of initialization. Args can have arbitrary structure.
PluginSet specifies enabled and disabled plugins for an extension point. If an array is empty, missing, or nil, default plugins at that extension point will be used.
Enabled specifies plugins that should be enabled in addition to default plugins. If the default plugin is also configured in the scheduler config file, the weight of plugin will be overridden accordingly. These are called after default plugins and in the same order specified here.
Disabled specifies default plugins that should be disabled. When all default plugins need to be disabled, an array containing only one "*" should be provided.
Plugins include multiple extension points. When specified, the list of plugins for a particular extension point are the only ones enabled. If an extension point is omitted from the config, then the default set of plugins is used for that extension point. Enabled plugins are called in the order specified here, after default plugins. If they need to be invoked before default plugins, default plugins must be disabled and re-enabled here in desired order.
QueueSort is a list of plugins that should be invoked when sorting pods in the scheduling queue.
PreFilter is a list of plugins that should be invoked at "PreFilter" extension point of the scheduling framework.
Filter is a list of plugins that should be invoked when filtering out nodes that cannot run the Pod.
PostFilter is a list of plugins that are invoked after filtering phase, but only when no feasible nodes were found for the pod.
PreScore is a list of plugins that are invoked before scoring.
Score is a list of plugins that should be invoked when ranking nodes that have passed the filtering phase.
Reserve is a list of plugins invoked when reserving/unreserving resources after a node is assigned to run the pod.
Permit is a list of plugins that control binding of a Pod. These plugins can prevent or delay binding of a Pod.
PreBind is a list of plugins that should be invoked before a pod is bound.
Bind is a list of plugins that should be invoked at "Bind" extension point of the scheduling framework. The scheduler call these plugins in order. Scheduler skips the rest of these plugins as soon as one returns success.
PostBind is a list of plugins that should be invoked after a pod is successfully bound.
MultiPoint is a simplified config section to enable plugins for all valid extension points.
PodTopologySpreadConstraintsDefaulting defines how to set default constraints for the PodTopologySpread plugin.
RequestedToCapacityRatioParam define RequestedToCapacityRatio parameters
Shape is a list of points defining the scoring function shape.
ResourceSpec represents a single resource.
Name of the resource.
Weight of the resource.
ScoringStrategy define ScoringStrategyType for node resource plugin
Type selects which strategy to run.
Resources to consider when scoring. The default resource set includes "cpu" and "memory" with an equal weight. Allowed weights go from 1 to 100. Weight defaults to 1 if not specified or explicitly set to 0.
Arguments specific to RequestedToCapacityRatio strategy.
ScoringStrategyType the type of scoring strategy used in NodeResourcesFit plugin.
UtilizationShapePoint represents single point of priority function shape.
Utilization (x axis). Valid values are 0 to 100. Fully utilized node maps to 100.
Score assigned to given utilization (y axis). Valid values are 0 to 10.
ClientConnectionConfiguration contains details for constructing a client.
kubeconfig is the path to a KubeConfig file.
acceptContentTypes defines the Accept header sent by clients when connecting to a server, overriding the default value of 'application/json'. This field will control all connections to the server used by a particular client.
contentType is the content type used when sending data to the server from this client.
qps controls the number of queries per second allowed for this connection.
burst allows extra queries to accumulate when a client is exceeding its rate.
DebuggingConfiguration holds configuration for Debugging related features.
enableProfiling enables profiling via web interface host:port/debug/pprof/
enableContentionProfiling enables lock contention profiling, if enableProfiling is true.
LeaderElectionConfiguration defines the configuration of leader election clients for components that can run with leader election enabled.
leaderElect enables a leader election client to gain leadership before executing the main loop. Enable this when running replicated components for high availability.
leaseDuration is the duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled.
renewDeadline is the interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than or equal to the lease duration. This is only applicable if leader election is enabled.
retryPeriod is the duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled.
resourceLock indicates the resource object type that will be used to lock during leader election cycles.
resourceName indicates the name of resource object that will be used to lock during leader election cycles.
resourceName indicates the namespace of resource object that will be used to lock during leader election cycles.
This page is automatically generated.
If you plan to report an issue with this page, mention that the page is auto-generated in your issue description. The fix may need to happen elsewhere in the Kubernetes project.