Generated at: 2024-04-16 19:05:22 (CST)
API Version: v1.30.0 Switch /

API Overview

Welcome to the Kubernetes API. You can use the Kubernetes API to read and write Kubernetes resource objects via a Kubernetes API endpoint.

Resource Categories

This is a high-level overview of the basic types of resources provide by the Kubernetes API and their primary functions.

Workloads are objects you use to manage and run your containers on the cluster.

Discovery & LB resources are objects you use to "stitch" your workloads together into an externally accessible, load-balanced Service.

Config & Storage resources are objects you use to inject initialization data into your applications, and to persist data that is external to your container.

Cluster resources objects define how the cluster itself is configured; these are typically used only by cluster operators.

Metadata resources are objects you use to configure the behavior of other resources within the cluster, such as HorizontalPodAutoscaler for scaling workloads.

Resource Objects

Resource objects typically have 3 components:

  • Resource ObjectMeta: This is metadata about the resource, such as its name, type, api version, annotations, and labels. This contains fields that maybe updated both by the end user and the system (e.g. annotations).
  • ResourceSpec: This is defined by the user and describes the desired state of system. Fill this in when creating or updating an object.
  • ResourceStatus: This is filled in by the server and reports the current state of the system. In most cases, users don't need to change this.

Resource Operations

Most resources provide the following Operations:

Create

Create operations will create the resource in the storage backend. After a resource is create the system will apply the desired state.

Update

Updates come in 2 forms: Replace and Patch:

  • Replace: Replacing a resource object will update the resource by replacing the existing spec with the provided one. For read-then-write operations this is safe because an optimistic lock failure will occur if the resource was modified between the read and write. Note: The ResourceStatus will be ignored by the system and will not be updated. To update the status, one must invoke the specific status update operation.
    Note: Replacing a resource object may not result immediately in changes being propagated to downstream objects. For instance replacing a ConfigMap or Secret resource will not result in all Pods seeing the changes unless the Pods are restarted out of band.
  • Patch: Patch will apply a change to a specific field. How the change is merged is defined per field. Lists may either be replaced or merged. Merging lists will not preserve ordering.
    Patches will never cause optimistic locking failures, and the last write will win. Patches are recommended when the full state is not read before an update, or when failing on optimistic locking is undesirable. When patching complex types, arrays and maps, how the patch is applied is defined on a per-field basis and may either replace the field's current value, or merge the contents into the current value.

Read

Reads come in 3 forms: Get, List and Watch:

  • Get: Get will retrieve a specific resource object by name.
  • List: List will retrieve all resource objects of a specific type within a namespace, and the results can be restricted to resources matching a selector query.
    List All Namespaces: Like List but retrieves resources across all namespaces.
  • Watch: Watch will stream results for an object(s) as it is updated. Similar to a callback, watch is used to respond to resource changes.

Delete

Delete will delete a resource. Depending on the specific resource, child objects may or may not be garbage collected by the server. See notes on specific resource objects for details.

Additional Operations

Resources may define additional operations specific to that resource type.

  • Rollback: Rollback a PodTemplate to a previous version. Only available for some resource types.
  • Read / Write Scale: Read or Update the number of replicas for the given resource. Only available for some resource types.
  • Read / Write Status: Read or Update the Status for a resource object. The Status can only changed through these update operations.

API Groups

The API Groups and their versions are summarized in the following table.

GroupVersions
admissionregistration.k8s.iov1, v1beta1, v1alpha1
apiextensions.k8s.iov1
apiregistration.k8s.iov1
appsv1
authentication.k8s.iov1, v1beta1, v1alpha1
authorization.k8s.iov1
autoscalingv2, v1
batchv1
certificates.k8s.iov1, v1alpha1
coordination.k8s.iov1
corev1
discovery.k8s.iov1
events.k8s.iov1
flowcontrol.apiserver.k8s.iov1, v1beta3
internal.apiserver.k8s.iov1alpha1
networking.k8s.iov1, v1alpha1
node.k8s.iov1
policyv1
rbac.authorization.k8s.iov1
resource.k8s.iov1alpha2
scheduling.k8s.iov1
storage.k8s.iov1, v1alpha1
storagemigration.k8s.iov1alpha1

Workloads

Workloads resources are responsible for managing and running your containers on the cluster. Containers are created by Controllers through Pods. Pods run Containers and provide environmental dependencies such as shared or persistent storage Volumes and Configuration or Secret data injected into the container.

The most common Controllers are:

  • Deployments for stateless persistent apps (e.g. HTTP servers).
  • StatefulSets for stateful persistent apps (e.g. databases).
  • Jobs for run-to-completion apps (e.g. batch Jobs).

Container v1 core

Container Config to run nginx (must be embedded in a PodSpec to run).
name: nginx
# Run the nginx:1.14 image
image: nginx:1.14
GroupVersionKind
corev1Container

Warning:

Containers are only ever created within the context of a Pod. This is usually done using a Controller. See Controllers: Deployment, Job, or StatefulSet

Appears In:
FieldDescription
args
string array
Arguments to the entrypoint. The container image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command
string array
Entrypoint array. Not executed within a shell. The container image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
env
EnvVar array
patch strategy: merge
patch merge key: name
List of environment variables to set in the container. Cannot be updated.
envFrom
EnvFromSource array
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
image
string
Container image name. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.
imagePullPolicy
string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle
Lifecycle
Actions that the management system should take in response to container lifecycle events. Cannot be updated.
livenessProbe
Probe
Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
name
string
Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.
ports
ContainerPort array
patch strategy: merge
patch merge key: containerPort
List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.
readinessProbe
Probe
Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
resizePolicy
ContainerResizePolicy array
Resources resize policy for the container.
resources
ResourceRequirements
Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
restartPolicy
string
RestartPolicy defines the restart behavior of individual containers in a pod. This field may only be set for init containers, and the only allowed value is "Always". For non-init containers or when this field is not specified, the restart behavior is defined by the Pod's restart policy and the container type. Setting the RestartPolicy as "Always" for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy "Always" will be shut down. This lifecycle differs from normal init containers and is often referred to as a "sidecar" container. Although this init container still starts in the init container sequence, it does not wait for the container to complete before proceeding to the next init container. Instead, the next init container starts immediately after this init container is started, or after any startupProbe has successfully completed.
securityContext
SecurityContext
SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
startupProbe
Probe
StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
stdin
boolean
Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.
stdinOnce
boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
terminationMessagePath
string
Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
terminationMessagePolicy
string
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
tty
boolean
Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
volumeDevices
VolumeDevice array
patch strategy: merge
patch merge key: devicePath
volumeDevices is the list of block devices to be used by the container.
volumeMounts
VolumeMount array
patch strategy: merge
patch merge key: mountPath
Pod volumes to mount into the container's filesystem. Cannot be updated.
workingDir
string
Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.

ContainerStatus v1 core

Appears In:
FieldDescription
allocatedResources
object
AllocatedResources represents the compute resources allocated for this container by the node. Kubelet sets this value to Container.Resources.Requests upon successful pod admission and after successfully admitting desired pod resize.
containerID
string
ContainerID is the ID of the container in the format '<type>://<container_id>'. Where type is a container runtime identifier, returned from Version call of CRI API (for example "containerd").
image
string
Image is the name of container image that the container is running. The container image may not match the image used in the PodSpec, as it may have been resolved by the runtime. More info: https://kubernetes.io/docs/concepts/containers/images.
imageID
string
ImageID is the image ID of the container's image. The image ID may not match the image ID of the image used in the PodSpec, as it may have been resolved by the runtime.
lastState
ContainerState
LastTerminationState holds the last termination state of the container to help debug container crashes and restarts. This field is not populated if the container is still running and RestartCount is 0.
name
string
Name is a DNS_LABEL representing the unique name of the container. Each container in a pod must have a unique name across all container types. Cannot be updated.
ready
boolean
Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field). The value is typically used to determine whether a container is ready to accept traffic.
resources
ResourceRequirements
Resources represents the compute resource requests and limits that have been successfully enacted on the running container after it has been started or has been successfully resized.
restartCount
integer
RestartCount holds the number of times the container has been restarted. Kubelet makes an effort to always increment the value, but there are cases when the state may be lost due to node restarts and then the value may be reset to 0. The value is never negative.
started
boolean
Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.
state
ContainerState
State holds details about the container's current condition.
volumeMounts
VolumeMountStatus array
patch strategy: merge
patch merge key: mountPath
Status of volume mounts.

CronJob v1 batch

GroupVersionKind
batchv1CronJob
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
CronJobSpec
Specification of the desired behavior of a cron job, including the schedule. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
CronJobStatus
Current status of a cron job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

CronJobSpec v1 batch

Appears In:
FieldDescription
concurrencyPolicy
string
Specifies how to treat concurrent executions of a Job. Valid values are: - "Allow" (default): allows CronJobs to run concurrently; - "Forbid": forbids concurrent runs, skipping next run if previous run hasn't finished yet; - "Replace": cancels currently running job and replaces it with a new one
failedJobsHistoryLimit
integer
The number of failed finished jobs to retain. Value must be non-negative integer. Defaults to 1.
jobTemplate
JobTemplateSpec
Specifies the job that will be created when executing a CronJob.
schedule
string
The schedule in Cron format, see https://en.wikipedia.org/wiki/Cron.
startingDeadlineSeconds
integer
Optional deadline in seconds for starting the job if it misses scheduled time for any reason. Missed jobs executions will be counted as failed ones.
successfulJobsHistoryLimit
integer
The number of successful finished jobs to retain. Value must be non-negative integer. Defaults to 3.
suspend
boolean
This flag tells the controller to suspend subsequent executions, it does not apply to already started executions. Defaults to false.
timeZone
string
The time zone name for the given schedule, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones. If not specified, this will default to the time zone of the kube-controller-manager process. The set of valid time zone names and the time zone offset is loaded from the system-wide time zone database by the API server during CronJob validation and the controller manager during execution. If no system-wide time zone database can be found a bundled version of the database is used instead. If the time zone name becomes invalid during the lifetime of a CronJob or due to a change in host configuration, the controller will stop creating new new Jobs and will create a system event with the reason UnknownTimeZone. More information can be found in https://kubernetes.io/docs/concepts/workloads/controllers/cron-jobs/#time-zones

CronJobStatus v1 batch

Appears In:
FieldDescription
active
ObjectReference array
A list of pointers to currently running jobs.
lastScheduleTime
Time
Information when was the last time the job was successfully scheduled.
lastSuccessfulTime
Time
Information when was the last time the job successfully completed.

CronJobList v1 batch

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CronJob array
items is the list of CronJobs.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CronJob

HTTP Request

POST /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CronJob

Response

CodeDescription
200
CronJob
OK
201
CronJob
Created
202
CronJob
Accepted

Patch

partially update the specified CronJob

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CronJob
OK
201
CronJob
Created

Replace

replace the specified CronJob

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CronJob

Response

CodeDescription
200
CronJob
OK
201
CronJob
Created

Delete

delete a CronJob

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of CronJob

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CronJob
OK

List

list or watch objects of kind CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CronJobList
OK

List All Namespaces

list or watch objects of kind CronJob

HTTP Request

GET /apis/batch/v1/cronjobs

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CronJobList
OK

Watch

watch changes to an object of kind CronJob. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/cronjobs/{name}

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CronJob. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/cronjobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of CronJob. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/cronjobs

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified CronJob

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CronJob
OK
201
CronJob
Created

Read Status

read status of the specified CronJob

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CronJob
OK

Replace Status

replace status of the specified CronJob

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/cronjobs/{name}/status

Path Parameters

ParameterDescription
namename of the CronJob
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CronJob

Response

CodeDescription
200
CronJob
OK
201
CronJob
Created

DaemonSet v1 apps

DaemonSet Config to print the `hostname` on each Node in the cluster every 10 seconds.
apiVersion: apps/v1
kind: DaemonSet
metadata:
  # Unique key of the DaemonSet instance
  name: daemonset-example
spec:
  selector:
    matchLabels:
      app: daemonset-example
  template:
    metadata:
      labels:
        app: daemonset-example
    spec:
      containers:
      # This container is run once on each Node in the cluster
      - name: daemonset-example
        image: ubuntu:trusty
        command:
        - /bin/sh
        args:
        - -c
        # This script is run through `sh -c <script>`
        - >-
          while [ true ]; do
          echo "DaemonSet running on $(hostname)" ;
          sleep 10 ;
          done
GroupVersionKind
appsv1DaemonSet
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
DaemonSetSpec
The desired behavior of this daemon set. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
DaemonSetStatus
The current status of this daemon set. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

DaemonSetSpec v1 apps

Appears In:
FieldDescription
minReadySeconds
integer
The minimum number of seconds for which a newly created DaemonSet pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready).
revisionHistoryLimit
integer
The number of old history to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.
selector
LabelSelector
A label query over pods that are managed by the daemon set. Must match in order to be controlled. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
template
PodTemplateSpec
An object that describes the pod that will be created. The DaemonSet will create exactly one copy of this pod on every node that matches the template's node selector (or on every node if no node selector is specified). The only allowed template.spec.restartPolicy value is "Always". More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template
updateStrategy
DaemonSetUpdateStrategy
An update strategy to replace existing DaemonSet pods with new pods.

DaemonSetStatus v1 apps

Appears In:
FieldDescription
collisionCount
integer
Count of hash collisions for the DaemonSet. The DaemonSet controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ControllerRevision.
conditions
DaemonSetCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a DaemonSet's current state.
currentNumberScheduled
integer
The number of nodes that are running at least 1 daemon pod and are supposed to run the daemon pod. More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
desiredNumberScheduled
integer
The total number of nodes that should be running the daemon pod (including nodes correctly running the daemon pod). More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
numberAvailable
integer
The number of nodes that should be running the daemon pod and have one or more of the daemon pod running and available (ready for at least spec.minReadySeconds)
numberMisscheduled
integer
The number of nodes that are running the daemon pod, but are not supposed to run the daemon pod. More info: https://kubernetes.io/docs/concepts/workloads/controllers/daemonset/
numberReady
integer
numberReady is the number of nodes that should be running the daemon pod and have one or more of the daemon pod running with a Ready Condition.
numberUnavailable
integer
The number of nodes that should be running the daemon pod and have none of the daemon pod running and available (ready for at least spec.minReadySeconds)
observedGeneration
integer
The most recent generation observed by the daemon set controller.
updatedNumberScheduled
integer
The total number of nodes that are running updated daemon pod

DaemonSetList v1 apps

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
DaemonSet array
A list of daemon sets.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

RollingUpdateDaemonSet v1 apps

FieldDescription
maxSurgeThe maximum number of nodes with an existing available DaemonSet pod that can have an updated DaemonSet pod during during an update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up to a minimum of 1. Default value is 0. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their a new pod created before the old pod is marked as deleted. The update starts by launching new pods on 30% of nodes. Once an updated pod is available (Ready for at least minReadySeconds) the old DaemonSet pod on that node is marked deleted. If the old pod becomes unavailable for any reason (Ready transitions to false, is evicted, or is drained) an updated pod is immediatedly created on that node without considering surge limits. Allowing surge implies the possibility that the resources consumed by the daemonset on any given node can double if the readiness check fails, and so resource intensive daemonsets should take into account that they may cause evictions during disruption.
maxUnavailableThe maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0 if MaxSurge is 0 Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update.

Write Operations

Create

kubectl command
$ echo 'apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: daemonset-example
spec:
  selector:
    matchLabels:
      app: daemonset-example
  template:
    metadata:
      labels:
        app: daemonset-example
    spec:
      containers:
      - name: daemonset-example
        image: ubuntu:trusty
        command:
        - /bin/sh
        args:
        - -c
        - >-
          while [ true ]; do
          echo "DaemonSet running on $(hostname)" ;
          sleep 10 ;
          done
' | kubectl create -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X POST -H 'Content-Type: application/yaml' --data '
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: daemonset-example
spec:
  selector:
    matchLabels:
      app: daemonset-example
  template:
    metadata:
      labels:
        app: daemonset-example
    spec:
      containers:
      - name: daemonset-example
        image: ubuntu:trusty
        command:
        - /bin/sh
        args:
        - -c
        - >-
          while [ true ]; do
          echo "DaemonSet running on $(hostname)" ;
          sleep 10 ;
          done
' http://127.0.0.1:8001/apis/apps/v1/namespaces/default/daemonsets
Output
daemonset "daemonset-example" created
Response Body
{
  "kind": "DaemonSet",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "daemonset-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/daemonsets/daemonset-example",
    "uid": "65552ced-b0e2-11e6-aef0-42010af00229",
    "resourceVersion": "3558",
    "generation": 1,
    "creationTimestamp": "2016-11-22T18:35:09Z",
    "labels": {
      "app": "daemonset-example"
    }
  },
  "spec": {
    "selector": {
      "matchLabels": {
        "app": "daemonset-example"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "daemonset-example"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "daemonset-example",
            "image": "ubuntu:trusty",
            "command": [
              "/bin/sh"
            ],
            "args": [
              "-c",
              "while [ true ]; do echo \"DaemonSet running on $(hostname)\" ; sleep 10 ; done"
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    }
  },
  "status": {
    "currentNumberScheduled": 0,
    "numberMisscheduled": 0,
    "desiredNumberScheduled": 0
  }
}

create a DaemonSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
DaemonSet

Response

CodeDescription
200
DaemonSet
OK
201
DaemonSet
Created
202
DaemonSet
Accepted

Patch

partially update the specified DaemonSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
DaemonSet
OK
201
DaemonSet
Created

Replace

replace the specified DaemonSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
DaemonSet

Response

CodeDescription
200
DaemonSet
OK
201
DaemonSet
Created

Delete

kubectl command
$ kubectl delete daemonset daemonset-example
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X DELETE -H 'Content-Type: application/yaml' --data '
gracePeriodSeconds: 0
orphanDependents: false
' 'http://127.0.0.1:8001/apis/apps/v1/namespaces/default/daemonsets/daemonset-example'
Output
daemonset "daemonset-example" deleted
Response Body
{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {},
  "status": "Success",
  "code": 200
}

delete a DaemonSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of DaemonSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

kubectl command
$ kubectl get daemonset daemonset-example -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET http://127.0.0.1:8001/apis/apps/v1/namespaces/default/daemonsets/daemonset-example

read the specified DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
DaemonSet
OK

List

list or watch objects of kind DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
DaemonSetList
OK

List All Namespaces

list or watch objects of kind DaemonSet

HTTP Request

GET /apis/apps/v1/daemonsets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
DaemonSetList
OK

Watch

watch changes to an object of kind DaemonSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/daemonsets/{name}

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of DaemonSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/daemonsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of DaemonSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/daemonsets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified DaemonSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
DaemonSet
OK
201
DaemonSet
Created

Read Status

read status of the specified DaemonSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
DaemonSet
OK

Replace Status

replace status of the specified DaemonSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/daemonsets/{name}/status

Path Parameters

ParameterDescription
namename of the DaemonSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
DaemonSet

Response

CodeDescription
200
DaemonSet
OK
201
DaemonSet
Created

Deployment v1 apps

Deployment Config to run 3 nginx instances (max rollback set to 10 revisions).
apiVersion: apps/v1
kind: Deployment
metadata:
  # Unique key of the Deployment instance
  name: deployment-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        # Apply this label to pods and default
        # the Deployment label selector to this value
        app: nginx
    spec:
      containers:
      - name: nginx
        # Run this image
        image: nginx:1.14
GroupVersionKind
appsv1Deployment
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
DeploymentSpec
Specification of the desired behavior of the Deployment.
status
DeploymentStatus
Most recently observed status of the Deployment.

DeploymentSpec v1 apps

Appears In:
FieldDescription
minReadySeconds
integer
Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
paused
boolean
Indicates that the deployment is paused.
progressDeadlineSeconds
integer
The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.
replicas
integer
Number of desired pods. This is a pointer to distinguish between explicit zero and not specified. Defaults to 1.
revisionHistoryLimit
integer
The number of old ReplicaSets to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.
selector
LabelSelector
Label selector for pods. Existing ReplicaSets whose pods are selected by this will be the ones affected by this deployment. It must match the pod template's labels.
strategy
DeploymentStrategy
patch strategy: retainKeys
The deployment strategy to use to replace existing pods with new ones.
template
PodTemplateSpec
Template describes the pods that will be created. The only allowed template.spec.restartPolicy value is "Always".

DeploymentStatus v1 apps

Appears In:
FieldDescription
availableReplicas
integer
Total number of available pods (ready for at least minReadySeconds) targeted by this deployment.
collisionCount
integer
Count of hash collisions for the Deployment. The Deployment controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ReplicaSet.
conditions
DeploymentCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a deployment's current state.
observedGeneration
integer
The generation observed by the deployment controller.
readyReplicas
integer
readyReplicas is the number of pods targeted by this Deployment with a Ready Condition.
replicas
integer
Total number of non-terminated pods targeted by this deployment (their labels match the selector).
unavailableReplicas
integer
Total number of unavailable pods targeted by this deployment. This is the total number of pods that are still required for the deployment to have 100% available capacity. They may either be pods that are running but not yet available or pods that still have not been created.
updatedReplicas
integer
Total number of non-terminated pods targeted by this deployment that have the desired template spec.

DeploymentList v1 apps

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Deployment array
Items is the list of Deployments.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata.

DeploymentStrategy v1 apps

FieldDescription
rollingUpdate
RollingUpdateDeployment
Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate.
type
string
Type of deployment. Can be "Recreate" or "RollingUpdate". Default is RollingUpdate.

RollingUpdateDeployment v1 apps

FieldDescription
maxSurgeThe maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.
maxUnavailableThe maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.

Write Operations

Create

kubectl command
$ echo 'apiVersion: apps/v1
kind: Deployment
metadata:
  name: deployment-example
spec:
  replicas: 3
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx:1.14
        ports:
        - containerPort: 80
' | kubectl create -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X POST -H 'Content-Type: application/yaml' --data '
apiVersion: apps/v1
kind: Deployment
metadata:
  name: deployment-example
spec:
  replicas: 3
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx:1.14
        ports:
        - containerPort: 80
' http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments
Output
deployment "deployment-example" created
Response Body
{
  "kind": "Deployment",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
    "uid": "4ccca349-9cb1-11e6-9c54-42010a800148",
    "resourceVersion": "2118306",
    "generation": 1,
    "creationTimestamp": "2016-10-28T01:53:19Z",
    "labels": {
      "app": "nginx"
    }
  },
  "spec": {
    "replicas": 3,
    "selector": {
      "matchLabels": {
        "app": "nginx"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "nginx"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "nginx",
            "image": "nginx:1.14",
            "ports": [
              {
                "containerPort": 80,
                "protocol": "TCP"
              }
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    },
    "strategy": {
      "type": "RollingUpdate",
      "rollingUpdate": {
        "maxUnavailable": 1,
        "maxSurge": 1
      }
    },
    "revisionHistoryLimit": 10
  },
  "status": {}
}

create a Deployment

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Deployment

Response

CodeDescription
200
Deployment
OK
201
Deployment
Created
202
Deployment
Accepted

Patch

kubectl command
$ kubectl patch deployment deployment-example -p \
	'{"spec":{"template":{"spec":{"containers":[{"name":"nginx","image":"nginx:1.16"}]}}}}'
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X PATCH -H 'Content-Type: application/strategic-merge-patch+json' --data '
{"spec":{"template":{"spec":{"containers":[{"name":"nginx","image":"nginx:1.16"}]}}}}' \
	'http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments/deployment-example'
Output
"deployment-example" patched
Response Body
{
  "kind": "Deployment",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
    "uid": "5dc3a8e6-b0ee-11e6-aef0-42010af00229",
    "resourceVersion": "164489",
    "generation": 11,
    "creationTimestamp": "2016-11-22T20:00:50Z",
    "labels": {
      "app": "nginx"
    },
    "annotations": {
      "deployment.kubernetes.io/revision": "5"
    }
  },
  "spec": {
    "replicas": 3,
    "selector": {
      "matchLabels": {
        "app": "nginx"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "nginx"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "nginx",
            "image": "nginx:1.16",
            "ports": [
              {
                "containerPort": 80,
                "protocol": "TCP"
              }
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    },
    "strategy": {
      "type": "RollingUpdate",
      "rollingUpdate": {
        "maxUnavailable": 1,
        "maxSurge": 1
      }
    },
    "revisionHistoryLimit": 10
  },
  "status": {
    "observedGeneration": 10,
    "replicas": 3,
    "updatedReplicas": 3,
    "availableReplicas": 3
  }
}

partially update the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Deployment
OK
201
Deployment
Created

Replace

kubectl command
$ echo 'apiVersion: apps/v1
kind: Deployment
metadata:
  name: deployment-example
spec:
  replicas: 3
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx:1.16
        ports:
        - containerPort: 80
' | kubectl replace -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X PUT -H 'Content-Type: application/yaml' --data '
apiVersion: apps/v1
kind: Deployment
metadata:
  name: deployment-example
spec:
  replicas: 3
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx:1.16
        ports:
        - containerPort: 80
' http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments/deployment-example
Output
deployment "deployment-example" replaced
Response Body
{
  "kind": "Deployment",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
    "uid": "4ccca349-9cb1-11e6-9c54-42010a800148",
    "resourceVersion": "2119082",
    "generation": 5,
    "creationTimestamp": "2016-10-28T01:53:19Z",
    "labels": {
      "app": "nginx"
    }
  },
  "spec": {
    "replicas": 3,
    "selector": {
      "matchLabels": {
        "app": "nginx"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "nginx"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "nginx",
            "image": "nginx:1.16",
            "ports": [
              {
                "containerPort": 80,
                "protocol": "TCP"
              }
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    },
    "strategy": {
      "type": "RollingUpdate",
      "rollingUpdate": {
        "maxUnavailable": 1,
        "maxSurge": 1
      }
    },
    "revisionHistoryLimit": 10
  },
  "status": {
    "observedGeneration": 4,
    "replicas": 3,
    "updatedReplicas": 3,
    "availableReplicas": 3
  }
}

replace the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Deployment

Response

CodeDescription
200
Deployment
OK
201
Deployment
Created

Delete

kubectl command
$ kubectl delete deployment deployment-example
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X DELETE -H 'Content-Type: application/yaml' --data '
gracePeriodSeconds: 0
orphanDependents: false
' 'http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments/deployment-example'
Output
deployment "deployment-example" deleted
Response Body
{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {},
  "status": "Success",
  "code": 200
}

delete a Deployment

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Deployment

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

kubectl command
$ kubectl get deployment deployment-example -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments/deployment-example
Output
{
  "kind": "Deployment",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
    "uid": "1b33145a-9c63-11e6-9c54-42010a800148",
    "resourceVersion": "2064726",
    "generation": 4,
    "creationTimestamp": "2016-10-27T16:33:35Z",
    "labels": {
      "app": "nginx"
    },
    "annotations": {
      "deployment.kubernetes.io/revision": "1"
    }
  },
  "spec": {
    "replicas": 3,
    "selector": {
      "matchLabels": {
        "app": "nginx"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "nginx"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "nginx",
            "image": "nginx:1.14",
            "ports": [
              {
                "containerPort": 80,
                "protocol": "TCP"
              }
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    },
    "strategy": {
      "type": "RollingUpdate",
      "rollingUpdate": {
        "maxUnavailable": 1,
        "maxSurge": 1
      }
    }
  },
  "status": {
    "observedGeneration": 4,
    "replicas": 3,
    "updatedReplicas": 3,
    "availableReplicas": 3
  }
}
Response Body
{
  "kind": "Deployment",
  "apiVersion": "apps/v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
    "uid": "1b33145a-9c63-11e6-9c54-42010a800148",
    "resourceVersion": "2064726",
    "generation": 4,
    "creationTimestamp": "2016-10-27T16:33:35Z",
    "labels": {
      "app": "nginx"
    },
    "annotations": {
      "deployment.kubernetes.io/revision": "1"
    }
  },
  "spec": {
    "replicas": 3,
    "selector": {
      "matchLabels": {
        "app": "nginx"
      }
    },
    "template": {
      "metadata": {
        "creationTimestamp": null,
        "labels": {
          "app": "nginx"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "nginx",
            "image": "nginx:1.14",
            "ports": [
              {
                "containerPort": 80,
                "protocol": "TCP"
              }
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "IfNotPresent"
          }
        ],
        "restartPolicy": "Always",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    },
    "strategy": {
      "type": "RollingUpdate",
      "rollingUpdate": {
        "maxUnavailable": 1,
        "maxSurge": 1
      }
    }
  },
  "status": {
    "observedGeneration": 4,
    "replicas": 3,
    "updatedReplicas": 3,
    "availableReplicas": 3
  }
}

read the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Deployment
OK

List

kubectl command
$ kubectl get deployment -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/apis/apps/v1/namespaces/default/deployments'
Output
{
  "kind": "List",
  "apiVersion": "v1",
  "metadata": {},
  "items": [
    {
      "kind": "Deployment",
      "apiVersion": "app/v1beta1",
      "metadata": {
        "name": "docs",
        "namespace": "default",
        "selfLink": "/apis/app/v1beta1/namespaces/default/deployments/docs",
        "uid": "ef49e1d2-915e-11e6-be81-42010a80003f",
        "resourceVersion": "1924126",
        "generation": 21,
        "creationTimestamp": "2016-10-13T16:06:00Z",
        "labels": {
          "run": "docs"
        },
        "annotations": {
          "deployment.kubernetes.io/revision": "10",
          "replicatingperfection.net/push-image": "true"
        }
      },
      "spec": {
        "replicas": 1,
        "selector": {
          "matchLabels": {
            "run": "docs"
          }
        },
        "template": {
          "metadata": {
            "creationTimestamp": null,
            "labels": {
              "auto-pushed-image-pwittrock/api-docs": "1477496453",
              "run": "docs"
            }
          },
          "spec": {
            "containers": [
              {
                "name": "docs",
                "image": "pwittrock/api-docs:v9",
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "Always"
              }
            ],
            "restartPolicy": "Always",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        },
        "strategy": {
          "type": "RollingUpdate",
          "rollingUpdate": {
            "maxUnavailable": 1,
            "maxSurge": 1
          }
        }
      },
      "status": {
        "observedGeneration": 21,
        "replicas": 1,
        "updatedReplicas": 1,
        "availableReplicas": 1
      }
    },
    {
      "kind": "Deployment",
      "apiVersion": "app/v1beta1",
      "metadata": {
        "name": "deployment-example",
        "namespace": "default",
        "selfLink": "/apis/app/v1beta1/namespaces/default/deployments/deployment-example",
        "uid": "1b33145a-9c63-11e6-9c54-42010a800148",
        "resourceVersion": "2064726",
        "generation": 4,
        "creationTimestamp": "2016-10-27T16:33:35Z",
        "labels": {
          "app": "nginx"
        },
        "annotations": {
          "deployment.kubernetes.io/revision": "1"
        }
      },
      "spec": {
        "replicas": 3,
        "selector": {
          "matchLabels": {
            "app": "nginx"
          }
        },
        "template": {
          "metadata": {
            "creationTimestamp": null,
            "labels": {
              "app": "nginx"
            }
          },
          "spec": {
            "containers": [
              {
                "name": "nginx",
                "image": "nginx:1.14",
                "ports": [
                  {
                    "containerPort": 80,
                    "protocol": "TCP"
                  }
                ],
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "IfNotPresent"
              }
            ],
            "restartPolicy": "Always",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        },
        "strategy": {
          "type": "RollingUpdate",
          "rollingUpdate": {
            "maxUnavailable": 1,
            "maxSurge": 1
          }
        }
      },
      "status": {
        "observedGeneration": 4,
        "replicas": 3,
        "updatedReplicas": 3,
        "availableReplicas": 3
      }
    }
  ]
}
Response Body
{
  "kind": "List",
  "apiVersion": "v1",
  "metadata": {},
  "items": [
    {
      "kind": "Deployment",
      "apiVersion": "app/v1beta1",
      "metadata": {
        "name": "docs",
        "namespace": "default",
        "selfLink": "/apis/app/v1beta1/namespaces/default/deployments/docs",
        "uid": "ef49e1d2-915e-11e6-be81-42010a80003f",
        "resourceVersion": "1924126",
        "generation": 21,
        "creationTimestamp": "2016-10-13T16:06:00Z",
        "labels": {
          "run": "docs"
        },
        "annotations": {
          "deployment.kubernetes.io/revision": "10",
          "replicatingperfection.net/push-image": "true"
        }
      },
      "spec": {
        "replicas": 1,
        "selector": {
          "matchLabels": {
            "run": "docs"
          }
        },
        "template": {
          "metadata": {
            "creationTimestamp": null,
            "labels": {
              "auto-pushed-image-pwittrock/api-docs": "1477496453",
              "run": "docs"
            }
          },
          "spec": {
            "containers": [
              {
                "name": "docs",
                "image": "pwittrock/api-docs:v9",
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "Always"
              }
            ],
            "restartPolicy": "Always",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        },
        "strategy": {
          "type": "RollingUpdate",
          "rollingUpdate": {
            "maxUnavailable": 1,
            "maxSurge": 1
          }
        }
      },
      "status": {
        "observedGeneration": 21,
        "replicas": 1,
        "updatedReplicas": 1,
        "availableReplicas": 1
      }
    },
    {
      "kind": "Deployment",
      "apiVersion": "app/v1beta1",
      "metadata": {
        "name": "deployment-example",
        "namespace": "default",
        "selfLink": "/apis/app/v1beta1/namespaces/default/deployments/deployment-example",
        "uid": "1b33145a-9c63-11e6-9c54-42010a800148",
        "resourceVersion": "2064726",
        "generation": 4,
        "creationTimestamp": "2016-10-27T16:33:35Z",
        "labels": {
          "app": "nginx"
        },
        "annotations": {
          "deployment.kubernetes.io/revision": "1"
        }
      },
      "spec": {
        "replicas": 3,
        "selector": {
          "matchLabels": {
            "app": "nginx"
          }
        },
        "template": {
          "metadata": {
            "creationTimestamp": null,
            "labels": {
              "app": "nginx"
            }
          },
          "spec": {
            "containers": [
              {
                "name": "nginx",
                "image": "nginx:1.14",
                "ports": [
                  {
                    "containerPort": 80,
                    "protocol": "TCP"
                  }
                ],
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "IfNotPresent"
              }
            ],
            "restartPolicy": "Always",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        },
        "strategy": {
          "type": "RollingUpdate",
          "rollingUpdate": {
            "maxUnavailable": 1,
            "maxSurge": 1
          }
        }
      },
      "status": {
        "observedGeneration": 4,
        "replicas": 3,
        "updatedReplicas": 3,
        "availableReplicas": 3
      }
    }
  ]
}

list or watch objects of kind Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
DeploymentList
OK

List All Namespaces

list or watch objects of kind Deployment

HTTP Request

GET /apis/apps/v1/deployments

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
DeploymentList
OK

Watch

kubectl command
$ kubectl get deployment deployment-example --watch -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/apis/apps/v1/watch/namespaces/default/deployments/deployment-example'
Output
{
	"type": "ADDED",
	"object": {
		"kind": "Deployment",
		"apiVersion": "apps/v1",
		"metadata": {
			"name": "deployment-example",
			"namespace": "default",
			"selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
			"uid": "64c12290-9cbf-11e6-9c54-42010a800148",
			"resourceVersion": "2128095",
			"generation": 2,
			"creationTimestamp": "2016-10-28T03:34:12Z",
			"labels": {
				"app": "nginx"
			},
			"annotations": {
				"deployment.kubernetes.io/revision": "3"
			}
		},
		"spec": {
			"replicas": 3,
			"selector": {
				"matchLabels": {
					"app": "nginx"
				}
			},
			"template": {
				"metadata": {
					"creationTimestamp": null,
					"labels": {
						"app": "nginx"
					}
				},
				"spec": {
					"containers": [
						{
							"name": "nginx",
							"image": "nginx:1.14",
							"ports": [
								{
									"containerPort": 80,
									"protocol": "TCP"
								}
							],
							"resources": {
							},
							"terminationMessagePath": "/dev/termination-log",
							"imagePullPolicy": "IfNotPresent"
						}
					],
					"restartPolicy": "Always",
					"terminationGracePeriodSeconds": 30,
					"dnsPolicy": "ClusterFirst",
					"securityContext": {
					}
				}
			},
			"strategy": {
				"type": "RollingUpdate",
				"rollingUpdate": {
					"maxUnavailable": 1,
					"maxSurge": 1
				}
			}
		},
		"status": {
			"observedGeneration": 2,
			"replicas": 3,
			"updatedReplicas": 3,
			"availableReplicas": 3
		}
	}
}
Response Body
{
	"type": "ADDED",
	"object": {
		"kind": "Deployment",
		"apiVersion": "apps/v1",
		"metadata": {
			"name": "deployment-example",
			"namespace": "default",
			"selfLink": "/apis/apps/v1/namespaces/default/deployments/deployment-example",
			"uid": "64c12290-9cbf-11e6-9c54-42010a800148",
			"resourceVersion": "2128095",
			"generation": 2,
			"creationTimestamp": "2016-10-28T03:34:12Z",
			"labels": {
				"app": "nginx"
			},
			"annotations": {
				"deployment.kubernetes.io/revision": "3"
			}
		},
		"spec": {
			"replicas": 3,
			"selector": {
				"matchLabels": {
					"app": "nginx"
				}
			},
			"template": {
				"metadata": {
					"creationTimestamp": null,
					"labels": {
						"app": "nginx"
					}
				},
				"spec": {
					"containers": [
						{
							"name": "nginx",
							"image": "nginx:1.14",
							"ports": [
								{
									"containerPort": 80,
									"protocol": "TCP"
								}
							],
							"resources": {
							},
							"terminationMessagePath": "/dev/termination-log",
							"imagePullPolicy": "IfNotPresent"
						}
					],
					"restartPolicy": "Always",
					"terminationGracePeriodSeconds": 30,
					"dnsPolicy": "ClusterFirst",
					"securityContext": {
					}
				}
			},
			"strategy": {
				"type": "RollingUpdate",
				"rollingUpdate": {
					"maxUnavailable": 1,
					"maxSurge": 1
				}
			}
		},
		"status": {
			"observedGeneration": 2,
			"replicas": 3,
			"updatedReplicas": 3,
			"availableReplicas": 3
		}
	}
}

watch changes to an object of kind Deployment. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/deployments/{name}

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Deployment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/deployments

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Deployment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/deployments

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Deployment
OK
201
Deployment
Created

Read Status

read status of the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Deployment
OK

Replace Status

replace status of the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}/status

Path Parameters

ParameterDescription
namename of the Deployment
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Deployment

Response

CodeDescription
200
Deployment
OK
201
Deployment
Created

Misc Operations

Read Scale

read scale of the specified Deployment

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Scale
OK

Replace Scale

replace scale of the specified Deployment

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Scale

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Patch Scale

partially update scale of the specified Deployment

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/deployments/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Job v1 batch

Job Config to print pi up to 2000 digits (then exit).
apiVersion: batch/v1
kind: Job
metadata:
  # Unique key of the Job instance
  name: example-job
spec:
  template:
    metadata:
      name: example-job
    spec:
      containers:
      - name: pi
        image: perl
        command: ["perl"]
        args: ["-Mbignum=bpi", "-wle", "print bpi(2000)"]
      # Do not restart containers after they exit
      restartPolicy: Never
GroupVersionKind
batchv1Job
Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
JobSpec
Specification of the desired behavior of a job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
JobStatus
Current status of a job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

JobSpec v1 batch

FieldDescription
activeDeadlineSeconds
integer
Specifies the duration in seconds relative to the startTime that the job may be continuously active before the system tries to terminate it; value must be positive integer. If a Job is suspended (at creation or through an update), this timer will effectively be stopped and reset when the Job is resumed again.
backoffLimit
integer
Specifies the number of retries before marking this job failed. Defaults to 6
backoffLimitPerIndex
integer
Specifies the limit for the number of retries within an index before marking this index as failed. When enabled the number of failures per index is kept in the pod's batch.kubernetes.io/job-index-failure-count annotation. It can only be set when Job's completionMode=Indexed, and the Pod's restart policy is Never. The field is immutable. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
completionMode
string
completionMode specifies how Pod completions are tracked. It can be `NonIndexed` (default) or `Indexed`. `NonIndexed` means that the Job is considered complete when there have been .spec.completions successfully completed Pods. Each Pod completion is homologous to each other. `Indexed` means that the Pods of a Job get an associated completion index from 0 to (.spec.completions - 1), available in the annotation batch.kubernetes.io/job-completion-index. The Job is considered complete when there is one successfully completed Pod for each index. When value is `Indexed`, .spec.completions must be specified and `.spec.parallelism` must be less than or equal to 10^5. In addition, The Pod name takes the form `$(job-name)-$(index)-$(random-string)`, the Pod hostname takes the form `$(job-name)-$(index)`. More completion modes can be added in the future. If the Job controller observes a mode that it doesn't recognize, which is possible during upgrades due to version skew, the controller skips updates for the Job.
completions
integer
Specifies the desired number of successfully finished pods the job should be run with. Setting to null means that the success of any pod signals the success of all pods, and allows parallelism to have any positive value. Setting to 1 means that parallelism is limited to 1 and the success of that pod signals the success of the job. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
managedBy
string
ManagedBy field indicates the controller that manages a Job. The k8s Job controller reconciles jobs which don't have this field at all or the field value is the reserved string `kubernetes.io/job-controller`, but skips reconciling Jobs with a custom value for this field. The value must be a valid domain-prefixed path (e.g. acme.io/foo) - all characters before the first "/" must be a valid subdomain as defined by RFC 1123. All characters trailing the first "/" must be valid HTTP Path characters as defined by RFC 3986. The value cannot exceed 64 characters. This field is alpha-level. The job controller accepts setting the field when the feature gate JobManagedBy is enabled (disabled by default).
manualSelector
boolean
manualSelector controls generation of pod labels and pod selectors. Leave `manualSelector` unset unless you are certain what you are doing. When false or unset, the system pick labels unique to this job and appends those labels to the pod template. When true, the user is responsible for picking unique labels and specifying the selector. Failure to pick a unique label may cause this and other jobs to not function correctly. However, You may see `manualSelector=true` in jobs that were created with the old `extensions/v1beta1` API. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/#specifying-your-own-pod-selector
maxFailedIndexes
integer
Specifies the maximal number of failed indexes before marking the Job as failed, when backoffLimitPerIndex is set. Once the number of failed indexes exceeds this number the entire Job is marked as Failed and its execution is terminated. When left as null the job continues execution of all of its indexes and is marked with the `Complete` Job condition. It can only be specified when backoffLimitPerIndex is set. It can be null or up to completions. It is required and must be less than or equal to 10^4 when is completions greater than 10^5. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
parallelism
integer
Specifies the maximum desired number of pods the job should run at any given time. The actual number of pods running in steady state will be less than this number when ((.spec.completions - .status.successful) < .spec.parallelism), i.e. when the work left to do is less than max parallelism. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
podFailurePolicy
PodFailurePolicy
Specifies the policy of handling failed pods. In particular, it allows to specify the set of actions and conditions which need to be satisfied to take the associated action. If empty, the default behaviour applies - the counter of failed pods, represented by the jobs's .status.failed field, is incremented and it is checked against the backoffLimit. This field cannot be used in combination with restartPolicy=OnFailure. This field is beta-level. It can be used when the `JobPodFailurePolicy` feature gate is enabled (enabled by default).
podReplacementPolicy
string
podReplacementPolicy specifies when to create replacement Pods. Possible values are: - TerminatingOrFailed means that we recreate pods when they are terminating (has a metadata.deletionTimestamp) or failed. - Failed means to wait until a previously created Pod is fully terminated (has phase Failed or Succeeded) before creating a replacement Pod. When using podFailurePolicy, Failed is the the only allowed value. TerminatingOrFailed and Failed are allowed values when podFailurePolicy is not in use. This is an beta field. To use this, enable the JobPodReplacementPolicy feature toggle. This is on by default.
selector
LabelSelector
A label query over pods that should match the pod count. Normally, the system sets this field for you. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
successPolicy
SuccessPolicy
successPolicy specifies the policy when the Job can be declared as succeeded. If empty, the default behavior applies - the Job is declared as succeeded only when the number of succeeded pods equals to the completions. When the field is specified, it must be immutable and works only for the Indexed Jobs. Once the Job meets the SuccessPolicy, the lingering pods are terminated. This field is alpha-level. To use this field, you must enable the `JobSuccessPolicy` feature gate (disabled by default).
suspend
boolean
suspend specifies whether the Job controller should create Pods or not. If a Job is created with suspend set to true, no Pods are created by the Job controller. If a Job is suspended after creation (i.e. the flag goes from false to true), the Job controller will delete all active Pods associated with this Job. Users must design their workload to gracefully handle this. Suspending a Job will reset the StartTime field of the Job, effectively resetting the ActiveDeadlineSeconds timer too. Defaults to false.
template
PodTemplateSpec
Describes the pod that will be created when executing a job. The only allowed template.spec.restartPolicy values are "Never" or "OnFailure". More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
ttlSecondsAfterFinished
integer
ttlSecondsAfterFinished limits the lifetime of a Job that has finished execution (either Complete or Failed). If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to be automatically deleted. When the Job is being deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is unset, the Job won't be automatically deleted. If this field is set to zero, the Job becomes eligible to be deleted immediately after it finishes.

JobStatus v1 batch

Appears In:
FieldDescription
active
integer
The number of pending and running pods which are not terminating (without a deletionTimestamp). The value is zero for finished jobs.
completedIndexes
string
completedIndexes holds the completed indexes when .spec.completionMode = "Indexed" in a text format. The indexes are represented as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7".
completionTime
Time
Represents time when the job was completed. It is not guaranteed to be set in happens-before order across separate operations. It is represented in RFC3339 form and is in UTC. The completion time is set when the job finishes successfully, and only then. The value cannot be updated or removed. The value indicates the same or later point in time as the startTime field.
conditions
JobCondition array
patch strategy: merge
patch merge key: type
The latest available observations of an object's current state. When a Job fails, one of the conditions will have type "Failed" and status true. When a Job is suspended, one of the conditions will have type "Suspended" and status true; when the Job is resumed, the status of this condition will become false. When a Job is completed, one of the conditions will have type "Complete" and status true. A job is considered finished when it is in a terminal condition, either "Complete" or "Failed". A Job cannot have both the "Complete" and "Failed" conditions. Additionally, it cannot be in the "Complete" and "FailureTarget" conditions. The "Complete", "Failed" and "FailureTarget" conditions cannot be disabled. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/
failed
integer
The number of pods which reached phase Failed. The value increases monotonically.
failedIndexes
string
FailedIndexes holds the failed indexes when spec.backoffLimitPerIndex is set. The indexes are represented in the text format analogous as for the `completedIndexes` field, ie. they are kept as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the failed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". The set of failed indexes cannot overlap with the set of completed indexes. This field is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default).
ready
integer
The number of pods which have a Ready condition.
startTime
Time
Represents time when the job controller started processing a job. When a Job is created in the suspended state, this field is not set until the first time it is resumed. This field is reset every time a Job is resumed from suspension. It is represented in RFC3339 form and is in UTC. Once set, the field can only be removed when the job is suspended. The field cannot be modified while the job is unsuspended or finished.
succeeded
integer
The number of pods which reached phase Succeeded. The value increases monotonically for a given spec. However, it may decrease in reaction to scale down of elastic indexed jobs.
terminating
integer
The number of pods which are terminating (in phase Pending or Running and have a deletionTimestamp). This field is beta-level. The job controller populates the field when the feature gate JobPodReplacementPolicy is enabled (enabled by default).
uncountedTerminatedPods
UncountedTerminatedPods
uncountedTerminatedPods holds the UIDs of Pods that have terminated but the job controller hasn't yet accounted for in the status counters. The job controller creates pods with a finalizer. When a pod terminates (succeeded or failed), the controller does three steps to account for it in the job status: 1. Add the pod UID to the arrays in this field. 2. Remove the pod finalizer. 3. Remove the pod UID from the arrays while increasing the corresponding counter. Old jobs might not be tracked using this field, in which case the field remains null. The structure is empty for finished jobs.

JobList v1 batch

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Job array
items is the list of Jobs.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

kubectl command
$ echo 'apiVersion: batch/v1
kind: Job
metadata:
  name: example-job
spec:
  template:
    metadata:
      name: example-job
    spec:
      containers:
      - name: pi
        image: perl
        command: ["perl",  "-Mbignum=bpi", "-wle", "print bpi(2000)"]
      restartPolicy: Never
' | kubectl create -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X POST -H 'Content-Type: application/yaml' --data '
apiVersion: batch/v1
kind: Job
metadata:
  name: example-job
spec:
  template:
    metadata:
      name: example-job
    spec:
      containers:
      - name: pi
        image: perl
        command: ["perl",  "-Mbignum=bpi", "-wle", "print bpi(2000)"]
      restartPolicy: Never
' http://127.0.0.1:8001/apis/batch/v1/namespaces/default/jobs
Output
job "example-job" created
Response Body
{
  "kind": "Job",
  "apiVersion": "batch/v1",
  "metadata": {
    "name": "example-job",
    "namespace": "default",
    "selfLink": "/apis/batch/v1/namespaces/default/jobs/example-job",
    "uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
    "resourceVersion": "7479",
    "creationTimestamp": "2016-11-04T18:45:25Z"
  },
  "spec": {
    "parallelism": 1,
    "completions": 1,
    "selector": {
      "matchLabels": {
        "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
      }
    },
    "template": {
      "metadata": {
        "name": "example-job",
        "creationTimestamp": null,
        "labels": {
          "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
          "job-name": "example-job"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "pi",
            "image": "perl",
            "command": [
              "perl",
              "-Mbignum=bpi",
              "-wle",
              "print bpi(2000)"
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "Always"
          }
        ],
        "restartPolicy": "Never",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    }
  },
  "status": {}
}

create a Job

HTTP Request

POST /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Job

Response

CodeDescription
200
Job
OK
201
Job
Created
202
Job
Accepted

Patch

partially update the specified Job

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Job
OK
201
Job
Created

Replace

replace the specified Job

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Job

Response

CodeDescription
200
Job
OK
201
Job
Created

Delete

kubectl command
$ kubectl delete job example-job
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X DELETE -H 'Content-Type: application/yaml' --data '
gracePeriodSeconds: 0
orphanDependents: false
' 'http://127.0.0.1:8001/apis/batch/v1/namespaces/default/jobs/example-job'
Output
job "example-job" deleted
Response Body
{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {},
  "status": "Success",
  "code": 200
}

delete a Job

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Job

HTTP Request

DELETE /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

kubectl command
$ kubectl get job example-job -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET http://127.0.0.1:8001/apis/batch/v1/namespaces/default/jobs/example-job
Output
{
  "kind": "Job",
  "apiVersion": "batch/v1",
  "metadata": {
    "name": "example-job",
    "namespace": "default",
    "selfLink": "/apis/batch/v1/namespaces/default/jobs/example-job",
    "uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
    "resourceVersion": "7482",
    "creationTimestamp": "2016-11-04T18:45:25Z"
  },
  "spec": {
    "parallelism": 1,
    "completions": 1,
    "selector": {
      "matchLabels": {
        "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
      }
    },
    "template": {
      "metadata": {
        "name": "example-job",
        "creationTimestamp": null,
        "labels": {
          "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
          "job-name": "example-job"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "pi",
            "image": "perl",
            "command": [
              "perl",
              "-Mbignum=bpi",
              "-wle",
              "print bpi(2000)"
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "Always"
          }
        ],
        "restartPolicy": "Never",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    }
  },
  "status": {
    "startTime": "2016-11-04T18:45:25Z",
    "active": 1
  }
}
Response Body
{
  "kind": "Job",
  "apiVersion": "batch/v1",
  "metadata": {
    "name": "example-job",
    "namespace": "default",
    "selfLink": "/apis/batch/v1/namespaces/default/jobs/example-job",
    "uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
    "resourceVersion": "7482",
    "creationTimestamp": "2016-11-04T18:45:25Z"
  },
  "spec": {
    "parallelism": 1,
    "completions": 1,
    "selector": {
      "matchLabels": {
        "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
      }
    },
    "template": {
      "metadata": {
        "name": "example-job",
        "creationTimestamp": null,
        "labels": {
          "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
          "job-name": "example-job"
        }
      },
      "spec": {
        "containers": [
          {
            "name": "pi",
            "image": "perl",
            "command": [
              "perl",
              "-Mbignum=bpi",
              "-wle",
              "print bpi(2000)"
            ],
            "resources": {},
            "terminationMessagePath": "/dev/termination-log",
            "imagePullPolicy": "Always"
          }
        ],
        "restartPolicy": "Never",
        "terminationGracePeriodSeconds": 30,
        "dnsPolicy": "ClusterFirst",
        "securityContext": {}
      }
    }
  },
  "status": {
    "startTime": "2016-11-04T18:45:25Z",
    "active": 1
  }
}

read the specified Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs/{name}

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Job
OK

List

kubectl command
$ kubectl get job -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/apis/batch/v1/namespaces/default/jobs'
Output
{
  "kind": "JobList",
  "apiVersion": "batch/v1",
  "metadata": {
    "selfLink": "/apis/batch/v1/namespaces/default/jobs",
    "resourceVersion": "7589"
  },
  "items": [
    {
      "metadata": {
        "name": "",
        "namespace": "default",
        "selfLink": "/apis/batch/v1/namespaces/default/jobs/",
        "uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
        "resourceVersion": "7482",
        "creationTimestamp": "2016-11-04T18:45:25Z"
      },
      "spec": {
        "parallelism": 1,
        "completions": 1,
        "selector": {
          "matchLabels": {
            "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
          }
        },
        "template": {
          "metadata": {
            "name": "",
            "creationTimestamp": null,
            "labels": {
              "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
              "job-name": ""
            }
          },
          "spec": {
            "containers": [
              {
                "name": "pi",
                "image": "perl",
                "command": [
                  "perl",
                  "-Mbignum=bpi",
                  "-wle",
                  "print bpi(2000)"
                ],
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "Always"
              }
            ],
            "restartPolicy": "Never",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        }
      },
      "status": {
        "startTime": "2016-11-04T18:45:25Z",
        "active": 1
      }
    }
  ]
}
Response Body
{
  "kind": "JobList",
  "apiVersion": "batch/v1",
  "metadata": {
    "selfLink": "/apis/batch/v1/namespaces/default/jobs",
    "resourceVersion": "7589"
  },
  "items": [
    {
      "metadata": {
        "name": "",
        "namespace": "default",
        "selfLink": "/apis/batch/v1/namespaces/default/jobs/",
        "uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
        "resourceVersion": "7482",
        "creationTimestamp": "2016-11-04T18:45:25Z"
      },
      "spec": {
        "parallelism": 1,
        "completions": 1,
        "selector": {
          "matchLabels": {
            "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
          }
        },
        "template": {
          "metadata": {
            "name": "",
            "creationTimestamp": null,
            "labels": {
              "controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
              "job-name": ""
            }
          },
          "spec": {
            "containers": [
              {
                "name": "pi",
                "image": "perl",
                "command": [
                  "perl",
                  "-Mbignum=bpi",
                  "-wle",
                  "print bpi(2000)"
                ],
                "resources": {},
                "terminationMessagePath": "/dev/termination-log",
                "imagePullPolicy": "Always"
              }
            ],
            "restartPolicy": "Never",
            "terminationGracePeriodSeconds": 30,
            "dnsPolicy": "ClusterFirst",
            "securityContext": {}
          }
        }
      },
      "status": {
        "startTime": "2016-11-04T18:45:25Z",
        "active": 1
      }
    }
  ]
}

list or watch objects of kind Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
JobList
OK

List All Namespaces

list or watch objects of kind Job

HTTP Request

GET /apis/batch/v1/jobs

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
JobList
OK

Watch

kubectl command
$ kubectl get job example-job --watch -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/apis/batch/v1/watch/namespaces/default/jobs/example-job'
Output
{
	"type": "ADDED",
	"object": {
		"kind": "Job",
		"apiVersion": "batch/v1",
		"metadata": {
			"name": "example-job",
			"namespace": "default",
			"selfLink": "/apis/batch/v1/namespaces/default/jobs/example-job",
			"uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
			"resourceVersion": "7482",
			"creationTimestamp": "2016-11-04T18:45:25Z"
		},
		"spec": {
			"parallelism": 1,
			"completions": 1,
			"selector": {
				"matchLabels": {
					"controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
				}
			},
			"template": {
				"metadata": {
					"name": "example-job",
					"creationTimestamp": null,
					"labels": {
						"controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
						"job-name": "example-job"
					}
				},
				"spec": {
					"containers": [
						{
							"name": "pi",
							"image": "perl",
							"command": [
								"perl",
								"-Mbignum=bpi",
								"-wle",
								"print bpi(2000)"
							],
							"resources": {
							},
							"terminationMessagePath": "/dev/termination-log",
							"imagePullPolicy": "Always"
						}
					],
					"restartPolicy": "Never",
					"terminationGracePeriodSeconds": 30,
					"dnsPolicy": "ClusterFirst",
					"securityContext": {
					}
				}
			}
		},
		"status": {
			"startTime": "2016-11-04T18:45:25Z",
			"active": 1
		}
	}
}
Response Body
{
	"type": "ADDED",
	"object": {
		"kind": "Job",
		"apiVersion": "batch/v1",
		"metadata": {
			"name": "example-job",
			"namespace": "default",
			"selfLink": "/apis/batch/v1/namespaces/default/jobs/example-job",
			"uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
			"resourceVersion": "7482",
			"creationTimestamp": "2016-11-04T18:45:25Z"
		},
		"spec": {
			"parallelism": 1,
			"completions": 1,
			"selector": {
				"matchLabels": {
					"controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7"
				}
			},
			"template": {
				"metadata": {
					"name": "example-job",
					"creationTimestamp": null,
					"labels": {
						"controller-uid": "d93a3569-a2be-11e6-a008-fa043d458cc7",
						"job-name": "example-job"
					}
				},
				"spec": {
					"containers": [
						{
							"name": "pi",
							"image": "perl",
							"command": [
								"perl",
								"-Mbignum=bpi",
								"-wle",
								"print bpi(2000)"
							],
							"resources": {
							},
							"terminationMessagePath": "/dev/termination-log",
							"imagePullPolicy": "Always"
						}
					],
					"restartPolicy": "Never",
					"terminationGracePeriodSeconds": 30,
					"dnsPolicy": "ClusterFirst",
					"securityContext": {
					}
				}
			}
		},
		"status": {
			"startTime": "2016-11-04T18:45:25Z",
			"active": 1
		}
	}
}

watch changes to an object of kind Job. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/jobs/{name}

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Job. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/namespaces/{namespace}/jobs

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Job. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/batch/v1/watch/jobs

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Job

HTTP Request

PATCH /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Job
OK
201
Job
Created

Read Status

read status of the specified Job

HTTP Request

GET /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Job
OK

Replace Status

replace status of the specified Job

HTTP Request

PUT /apis/batch/v1/namespaces/{namespace}/jobs/{name}/status

Path Parameters

ParameterDescription
namename of the Job
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Job

Response

CodeDescription
200
Job
OK
201
Job
Created

Pod v1 core

Pod Config to print "Hello World".
apiVersion: v1
kind: Pod
metadata:
  name: pod-example
spec:
  containers:
  - name: ubuntu
    image: ubuntu:trusty
    command: ["echo"]
    args: ["Hello World"]
GroupVersionKind
corev1Pod

Warning:

It is recommended that users create Pods only through a Controller, and not directly. See Controllers: Deployment, Job, or StatefulSet.

Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PodSpec
Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
PodStatus
Most recently observed status of the pod. This data may not be up to date. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodSpec v1 core

FieldDescription
activeDeadlineSeconds
integer
Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer.
affinity
Affinity
If specified, the pod's scheduling constraints
automountServiceAccountToken
boolean
AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.
containers
Container array
patch strategy: merge
patch merge key: name
List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.
dnsConfig
PodDNSConfig
Specifies the DNS parameters of a pod. Parameters specified here will be merged to the generated DNS configuration based on DNSPolicy.
dnsPolicy
string
Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.
enableServiceLinks
boolean
EnableServiceLinks indicates whether information about services should be injected into pod's environment variables, matching the syntax of Docker links. Optional: Defaults to true.
ephemeralContainers
EphemeralContainer array
patch strategy: merge
patch merge key: name
List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource.
hostAliases
HostAlias array
patch strategy: merge
patch merge key: ip
HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts file if specified.
hostIPC
boolean
Use the host's ipc namespace. Optional: Default to false.
hostNetwork
boolean
Host networking requested for this pod. Use the host's network namespace. If this option is set, the ports that will be used must be specified. Default to false.
hostPID
boolean
Use the host's pid namespace. Optional: Default to false.
hostUsers
boolean
Use the host's user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.
hostname
string
Specifies the hostname of the Pod If not specified, the pod's hostname will be set to a system-defined value.
imagePullSecrets
LocalObjectReference array
patch strategy: merge
patch merge key: name
ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod
initContainers
Container array
patch strategy: merge
patch merge key: name
List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
nodeName
string
NodeName is a request to schedule this pod onto a specific node. If it is non-empty, the scheduler simply schedules this pod onto that node, assuming that it fits resource requirements.
nodeSelector
object
NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node's labels for the pod to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/
os
PodOS
Specifies the OS of the containers in the pod. Some pod and container fields are restricted if this is set. If the OS field is set to linux, the following fields must be unset: -securityContext.windowsOptions If the OS field is set to windows, following fields must be unset: - spec.hostPID - spec.hostIPC - spec.hostUsers - spec.securityContext.appArmorProfile - spec.securityContext.seLinuxOptions - spec.securityContext.seccompProfile - spec.securityContext.fsGroup - spec.securityContext.fsGroupChangePolicy - spec.securityContext.sysctls - spec.shareProcessNamespace - spec.securityContext.runAsUser - spec.securityContext.runAsGroup - spec.securityContext.supplementalGroups - spec.containers[*].securityContext.appArmorProfile - spec.containers[*].securityContext.seLinuxOptions - spec.containers[*].securityContext.seccompProfile - spec.containers[*].securityContext.capabilities - spec.containers[*].securityContext.readOnlyRootFilesystem - spec.containers[*].securityContext.privileged - spec.containers[*].securityContext.allowPrivilegeEscalation - spec.containers[*].securityContext.procMount - spec.containers[*].securityContext.runAsUser - spec.containers[*].securityContext.runAsGroup
overhead
object
Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md
preemptionPolicy
string
PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.
priority
integer
The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority.
priorityClassName
string
If specified, indicates the pod's priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.
readinessGates
PodReadinessGate array
If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates
resourceClaims
PodResourceClaim array
patch strategy: merge,retainKeys
patch merge key: name
ResourceClaims defines which ResourceClaims must be allocated and reserved before the Pod is allowed to start. The resources will be made available to those containers which consume them by name. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable.
restartPolicy
string
Restart policy for all containers within the pod. One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. Default to Always. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy
runtimeClassName
string
RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class
schedulerName
string
If specified, the pod will be dispatched by specified scheduler. If not specified, the pod will be dispatched by default scheduler.
schedulingGates
PodSchedulingGate array
patch strategy: merge
patch merge key: name
SchedulingGates is an opaque list of values that if specified will block scheduling the pod. If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the scheduler will not attempt to schedule the pod. SchedulingGates can only be set at pod creation time, and be removed only afterwards.
securityContext
PodSecurityContext
SecurityContext holds pod-level security attributes and common container settings. Optional: Defaults to empty. See type description for default values of each field.
serviceAccount
string
DeprecatedServiceAccount is a deprecated alias for ServiceAccountName. Deprecated: Use serviceAccountName instead.
serviceAccountName
string
ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
setHostnameAsFQDN
boolean
If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false.
shareProcessNamespace
boolean
Share a single process namespace between all of the containers in a pod. When this is set containers will be able to view and signal processes from other containers in the same pod, and the first process in each container will not be assigned PID 1. HostPID and ShareProcessNamespace cannot both be set. Optional: Default to false.
subdomain
string
If specified, the fully qualified Pod hostname will be "<hostname>.<subdomain>.<pod namespace>.svc.<cluster domain>". If not specified, the pod will not have a domainname at all.
terminationGracePeriodSeconds
integer
Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds.
tolerations
Toleration array
If specified, the pod's tolerations.
topologySpreadConstraints
TopologySpreadConstraint array
patch strategy: merge
patch merge key: topologyKey
TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed.
volumes
Volume array
patch strategy: merge,retainKeys
patch merge key: name
List of volumes that can be mounted by containers belonging to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes

PodStatus v1 core

Appears In:
FieldDescription
conditions
PodCondition array
patch strategy: merge
patch merge key: type
Current service state of pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
containerStatuses
ContainerStatus array
The list has one entry per container in the manifest. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status
ephemeralContainerStatuses
ContainerStatus array
Status for any ephemeral containers that have run in this pod.
hostIP
string
hostIP holds the IP address of the host to which the pod is assigned. Empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns mean that HostIP will not be updated even if there is a node is assigned to pod
hostIPs
HostIP array
patch strategy: merge
patch merge key: ip
hostIPs holds the IP addresses allocated to the host. If this field is specified, the first entry must match the hostIP field. This list is empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns means that HostIPs will not be updated even if there is a node is assigned to this pod.
initContainerStatuses
ContainerStatus array
The list has one entry per init container in the manifest. The most recent successful init container will have ready = true, the most recently started container will have startTime set. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-status
message
string
A human readable message indicating details about why the pod is in this condition.
nominatedNodeName
string
nominatedNodeName is set only when this pod preempts other pods on the node, but it cannot be scheduled right away as preemption victims receive their graceful termination periods. This field does not guarantee that the pod will be scheduled on this node. Scheduler may decide to place the pod elsewhere if other nodes become available sooner. Scheduler may also decide to give the resources on this node to a higher priority pod that is created after preemption. As a result, this field may be different than PodSpec.nodeName when the pod is scheduled.
phase
string
The phase of a Pod is a simple, high-level summary of where the Pod is in its lifecycle. The conditions array, the reason and message fields, and the individual container status arrays contain more detail about the pod's status. There are five possible phase values: Pending: The pod has been accepted by the Kubernetes system, but one or more of the container images has not been created. This includes time before being scheduled as well as time spent downloading images over the network, which could take a while. Running: The pod has been bound to a node, and all of the containers have been created. At least one container is still running, or is in the process of starting or restarting. Succeeded: All containers in the pod have terminated in success, and will not be restarted. Failed: All containers in the pod have terminated, and at least one container has terminated in failure. The container either exited with non-zero status or was terminated by the system. Unknown: For some reason the state of the pod could not be obtained, typically due to an error in communicating with the host of the pod. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-phase
podIP
string
podIP address allocated to the pod. Routable at least within the cluster. Empty if not yet allocated.
podIPs
PodIP array
patch strategy: merge
patch merge key: ip
podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list is empty if no IPs have been allocated yet.
qosClass
string
The Quality of Service (QOS) classification assigned to the pod based on resource requirements See PodQOSClass type for available QOS classes More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-qos/#quality-of-service-classes
reason
string
A brief CamelCase message indicating details about why the pod is in this state. e.g. 'Evicted'
resize
string
Status of resources resize desired for pod's containers. It is empty if no resources resize is pending. Any changes to container resources will automatically set this to "Proposed"
resourceClaimStatuses
PodResourceClaimStatus array
patch strategy: merge,retainKeys
patch merge key: name
Status of resource claims.
startTime
Time
RFC 3339 date and time at which the object was acknowledged by the Kubelet. This is before the Kubelet pulled the container image(s) for the pod.

PodList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Pod array
List of pods. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Pod

Response

CodeDescription
200
Pod
OK
201
Pod
Created
202
Pod
Accepted

Create Eviction

create eviction of a Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/eviction

Path Parameters

ParameterDescription
namename of the Eviction
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
Eviction

Response

CodeDescription
200
Eviction
OK
201
Eviction
Created
202
Eviction
Accepted

Patch

partially update the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Pod
OK
201
Pod
Created

Replace

replace the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Pod

Response

CodeDescription
200
Pod
OK
201
Pod
Created

Delete

delete a Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Pod
OK
202
Pod
Accepted

Delete Collection

delete collection of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Pod
OK

List

list or watch objects of kind Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodList
OK

List All Namespaces

list or watch objects of kind Pod

HTTP Request

GET /api/v1/pods

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodList
OK

Watch

watch changes to an object of kind Pod. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/pods/{name}

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/pods

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Pod. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/pods

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Pod
OK
201
Pod
Created

Read Status

read status of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Pod
OK

Replace Status

replace status of the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/status

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Pod

Response

CodeDescription
200
Pod
OK
201
Pod
Created

EphemeralContainers Operations

Patch EphemeralContainers

partially update ephemeralcontainers of the specified Pod

HTTP Request

PATCH /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Pod
OK
201
Pod
Created

Read EphemeralContainers

read ephemeralcontainers of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Pod
OK

Replace EphemeralContainers

replace ephemeralcontainers of the specified Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/ephemeralcontainers

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Pod

Response

CodeDescription
200
Pod
OK
201
Pod
Created

Proxy Operations

Create Connect Portforward

connect POST requests to portforward of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/portforward

Path Parameters

ParameterDescription
namename of the PodPortForwardOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
portsList of ports to forward Required when using WebSockets

Response

CodeDescription
200
string
OK

Create Connect Proxy

connect POST requests to proxy of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Create Connect Proxy Path

connect POST requests to proxy of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Delete Connect Proxy

connect DELETE requests to proxy of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Pod

HTTP Request

DELETE /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Get Connect Portforward

connect GET requests to portforward of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/portforward

Path Parameters

ParameterDescription
namename of the PodPortForwardOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
portsList of ports to forward Required when using WebSockets

Response

CodeDescription
200
string
OK

Get Connect Proxy

connect GET requests to proxy of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Get Connect Proxy Path

connect GET requests to proxy of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Head Connect Proxy

connect HEAD requests to proxy of Pod

HTTP Request

HEAD /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Head Connect Proxy Path

connect HEAD requests to proxy of Pod

HTTP Request

HEAD /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Replace Connect Proxy

connect PUT requests to proxy of Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/proxy

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Replace Connect Proxy Path

connect PUT requests to proxy of Pod

HTTP Request

PUT /api/v1/namespaces/{namespace}/pods/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the PodProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to pod.

Response

CodeDescription
200
string
OK

Misc Operations

Read Log

read log of the specified Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/log

Path Parameters

ParameterDescription
namename of the Pod
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
containerThe container for which to stream logs. Defaults to only container if there is one container in the pod.
followFollow the log stream of the pod. Defaults to false.
insecureSkipTLSVerifyBackendinsecureSkipTLSVerifyBackend indicates that the apiserver should not confirm the validity of the serving certificate of the backend it is connecting to. This will make the HTTPS connection between the apiserver and the backend insecure. This means the apiserver cannot verify the log data it is receiving came from the real kubelet. If the kubelet is configured to verify the apiserver's TLS credentials, it does not mean the connection to the real kubelet is vulnerable to a man in the middle attack (e.g. an attacker could not intercept the actual log data coming from the real kubelet).
limitBytesIf set, the number of bytes to read from the server before terminating the log output. This may not display a complete final line of logging, and may return slightly more or slightly less than the specified limit.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
previousReturn previous terminated container logs. Defaults to false.
sinceSecondsA relative time in seconds before the current time from which to show logs. If this value precedes the time a pod was started, only logs since the pod start will be returned. If this value is in the future, no logs will be returned. Only one of sinceSeconds or sinceTime may be specified.
tailLinesIf set, the number of lines from the end of the logs to show. If not specified, logs are shown from the creation of the container or sinceSeconds or sinceTime
timestampsIf true, add an RFC3339 or RFC3339Nano timestamp at the beginning of every line of log output. Defaults to false.

Response

CodeDescription
200
string
OK

Get Connect Exec

connect GET requests to exec of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/exec

Path Parameters

ParameterDescription
namename of the PodExecOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
commandCommand is the remote command to execute. argv array. Not executed within a shell.
containerContainer in which to execute the command. Defaults to only container if there is only one container in the pod.
stderrRedirect the standard error stream of the pod for this call.
stdinRedirect the standard input stream of the pod for this call. Defaults to false.
stdoutRedirect the standard output stream of the pod for this call.
ttyTTY if true indicates that a tty will be allocated for the exec call. Defaults to false.

Response

CodeDescription
200
string
OK

Create Connect Exec

connect POST requests to exec of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/exec

Path Parameters

ParameterDescription
namename of the PodExecOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
commandCommand is the remote command to execute. argv array. Not executed within a shell.
containerContainer in which to execute the command. Defaults to only container if there is only one container in the pod.
stderrRedirect the standard error stream of the pod for this call.
stdinRedirect the standard input stream of the pod for this call. Defaults to false.
stdoutRedirect the standard output stream of the pod for this call.
ttyTTY if true indicates that a tty will be allocated for the exec call. Defaults to false.

Response

CodeDescription
200
string
OK

Get Connect Attach

connect GET requests to attach of Pod

HTTP Request

GET /api/v1/namespaces/{namespace}/pods/{name}/attach

Path Parameters

ParameterDescription
namename of the PodAttachOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
containerThe container in which to execute the command. Defaults to only container if there is only one container in the pod.
stderrStderr if true indicates that stderr is to be redirected for the attach call. Defaults to true.
stdinStdin if true, redirects the standard input stream of the pod for this call. Defaults to false.
stdoutStdout if true indicates that stdout is to be redirected for the attach call. Defaults to true.
ttyTTY if true indicates that a tty will be allocated for the attach call. This is passed through the container runtime so the tty is allocated on the worker node by the container runtime. Defaults to false.

Response

CodeDescription
200
string
OK

Create Connect Attach

connect POST requests to attach of Pod

HTTP Request

POST /api/v1/namespaces/{namespace}/pods/{name}/attach

Path Parameters

ParameterDescription
namename of the PodAttachOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
containerThe container in which to execute the command. Defaults to only container if there is only one container in the pod.
stderrStderr if true indicates that stderr is to be redirected for the attach call. Defaults to true.
stdinStdin if true, redirects the standard input stream of the pod for this call. Defaults to false.
stdoutStdout if true indicates that stdout is to be redirected for the attach call. Defaults to true.
ttyTTY if true indicates that a tty will be allocated for the attach call. This is passed through the container runtime so the tty is allocated on the worker node by the container runtime. Defaults to false.

Response

CodeDescription
200
string
OK

ReplicaSet v1 apps

ReplicaSet Config to run 3 nginx instances.
apiVersion: apps/v1
kind: ReplicaSet
metadata:
  # Unique key of the ReplicaSet instance
  name: replicaset-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      # Run the nginx image
      - name: nginx
        image: nginx:1.14
GroupVersionKind
appsv1ReplicaSet

Warning:

In many cases it is recommended to create a Deployment instead of ReplicaSet.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
If the Labels of a ReplicaSet are empty, they are defaulted to be the same as the Pod(s) that the ReplicaSet manages. Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
ReplicaSetSpec
Spec defines the specification of the desired behavior of the ReplicaSet. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
ReplicaSetStatus
Status is the most recently observed status of the ReplicaSet. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ReplicaSetSpec v1 apps

Appears In:
FieldDescription
minReadySeconds
integer
Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
replicas
integer
Replicas is the number of desired replicas. This is a pointer to distinguish between explicit zero and unspecified. Defaults to 1. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller
selector
LabelSelector
Selector is a label query over pods that should match the replica count. Label keys and values that must match in order to be controlled by this replica set. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
template
PodTemplateSpec
Template is the object that describes the pod that will be created if insufficient replicas are detected. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template

ReplicaSetStatus v1 apps

Appears In:
FieldDescription
availableReplicas
integer
The number of available replicas (ready for at least minReadySeconds) for this replica set.
conditions
ReplicaSetCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a replica set's current state.
fullyLabeledReplicas
integer
The number of pods that have labels matching the labels of the pod template of the replicaset.
observedGeneration
integer
ObservedGeneration reflects the generation of the most recently observed ReplicaSet.
readyReplicas
integer
readyReplicas is the number of pods targeted by this ReplicaSet with a Ready Condition.
replicas
integer
Replicas is the most recently observed number of replicas. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller/#what-is-a-replicationcontroller

ReplicaSetList v1 apps

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ReplicaSet array
List of ReplicaSets. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ReplicaSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicaSet

Response

CodeDescription
200
ReplicaSet
OK
201
ReplicaSet
Created
202
ReplicaSet
Accepted

Patch

partially update the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ReplicaSet
OK
201
ReplicaSet
Created

Replace

replace the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicaSet

Response

CodeDescription
200
ReplicaSet
OK
201
ReplicaSet
Created

Delete

delete a ReplicaSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ReplicaSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ReplicaSet
OK

List

list or watch objects of kind ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ReplicaSetList
OK

List All Namespaces

list or watch objects of kind ReplicaSet

HTTP Request

GET /apis/apps/v1/replicasets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ReplicaSetList
OK

Watch

watch changes to an object of kind ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/replicasets/{name}

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/replicasets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ReplicaSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/replicasets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ReplicaSet
OK
201
ReplicaSet
Created

Read Status

read status of the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ReplicaSet
OK

Replace Status

replace status of the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicaSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicaSet

Response

CodeDescription
200
ReplicaSet
OK
201
ReplicaSet
Created

Misc Operations

Read Scale

read scale of the specified ReplicaSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Scale
OK

Replace Scale

replace scale of the specified ReplicaSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Scale

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Patch Scale

partially update scale of the specified ReplicaSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/replicasets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Scale
OK
201
Scale
Created

ReplicationController v1 core

ReplicationController Config to run 3 nginx instances.
apiVersion: v1
kind: ReplicationController
metadata:
  # Unique key of the ReplicationController instance
  name: replicationcontroller-example
spec:
  # 3 Pods should exist at all times.
  replicas: 3
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      # Run the nginx image
      - name: nginx
        image: nginx:1.14
GroupVersionKind
corev1ReplicationController

Warning:

In many cases it is recommended to create a Deployment instead of a ReplicationController.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
If the Labels of a ReplicationController are empty, they are defaulted to be the same as the Pod(s) that the replication controller manages. Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
ReplicationControllerSpec
Spec defines the specification of the desired behavior of the replication controller. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
ReplicationControllerStatus
Status is the most recently observed status of the replication controller. This data may be out of date by some window of time. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ReplicationControllerSpec v1 core

FieldDescription
minReadySeconds
integer
Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
replicas
integer
Replicas is the number of desired replicas. This is a pointer to distinguish between explicit zero and unspecified. Defaults to 1. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#what-is-a-replicationcontroller
selector
object
Selector is a label query over pods that should match the Replicas count. If Selector is empty, it is defaulted to the labels present on the Pod template. Label keys and values that must match in order to be controlled by this replication controller, if empty defaulted to labels on Pod template. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
template
PodTemplateSpec
Template is the object that describes the pod that will be created if insufficient replicas are detected. This takes precedence over a TemplateRef. The only allowed template.spec.restartPolicy value is "Always". More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-template

ReplicationControllerStatus v1 core

FieldDescription
availableReplicas
integer
The number of available replicas (ready for at least minReadySeconds) for this replication controller.
conditions
ReplicationControllerCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a replication controller's current state.
fullyLabeledReplicas
integer
The number of pods that have labels matching the labels of the pod template of the replication controller.
observedGeneration
integer
ObservedGeneration reflects the generation of the most recently observed replication controller.
readyReplicas
integer
The number of ready replicas for this replication controller.
replicas
integer
Replicas is the most recently observed number of replicas. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#what-is-a-replicationcontroller

ReplicationControllerList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ReplicationController array
List of replication controllers. More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ReplicationController

HTTP Request

POST /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicationController

Response

CodeDescription
200
ReplicationController
OK
201
ReplicationController
Created
202
ReplicationController
Accepted

Patch

partially update the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ReplicationController
OK
201
ReplicationController
Created

Replace

replace the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicationController

Response

CodeDescription
200
ReplicationController
OK
201
ReplicationController
Created

Delete

delete a ReplicationController

HTTP Request

DELETE /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ReplicationController

HTTP Request

DELETE /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ReplicationController
OK

List

list or watch objects of kind ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ReplicationControllerList
OK

List All Namespaces

list or watch objects of kind ReplicationController

HTTP Request

GET /api/v1/replicationcontrollers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ReplicationControllerList
OK

Watch

watch changes to an object of kind ReplicationController. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/replicationcontrollers/{name}

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ReplicationController. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/replicationcontrollers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ReplicationController. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/replicationcontrollers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ReplicationController
OK
201
ReplicationController
Created

Read Status

read status of the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ReplicationController
OK

Replace Status

replace status of the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/status

Path Parameters

ParameterDescription
namename of the ReplicationController
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ReplicationController

Response

CodeDescription
200
ReplicationController
OK
201
ReplicationController
Created

Misc Operations

Read Scale

read scale of the specified ReplicationController

HTTP Request

GET /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Scale
OK

Replace Scale

replace scale of the specified ReplicationController

HTTP Request

PUT /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Scale

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Patch Scale

partially update scale of the specified ReplicationController

HTTP Request

PATCH /api/v1/namespaces/{namespace}/replicationcontrollers/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Scale
OK
201
Scale
Created

StatefulSet v1 apps

GroupVersionKind
appsv1StatefulSet
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
StatefulSetSpec
Spec defines the desired identities of pods in this set.
status
StatefulSetStatus
Status is the current status of Pods in this StatefulSet. This data may be out of date by some window of time.

StatefulSetSpec v1 apps

Appears In:
FieldDescription
minReadySeconds
integer
Minimum number of seconds for which a newly created pod should be ready without any of its container crashing for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)
ordinals
StatefulSetOrdinals
ordinals controls the numbering of replica indices in a StatefulSet. The default ordinals behavior assigns a "0" index to the first replica and increments the index by one for each additional replica requested. Using the ordinals field requires the StatefulSetStartOrdinal feature gate to be enabled, which is beta.
persistentVolumeClaimRetentionPolicy
StatefulSetPersistentVolumeClaimRetentionPolicy
persistentVolumeClaimRetentionPolicy describes the lifecycle of persistent volume claims created from volumeClaimTemplates. By default, all persistent volume claims are created as needed and retained until manually deleted. This policy allows the lifecycle to be altered, for example by deleting persistent volume claims when their stateful set is deleted, or when their pod is scaled down. This requires the StatefulSetAutoDeletePVC feature gate to be enabled, which is alpha. +optional
podManagementPolicy
string
podManagementPolicy controls how pods are created during initial scale up, when replacing pods on nodes, or when scaling down. The default policy is `OrderedReady`, where pods are created in increasing order (pod-0, then pod-1, etc) and the controller will wait until each pod is ready before continuing. When scaling down, the pods are removed in the opposite order. The alternative policy is `Parallel` which will create pods in parallel to match the desired scale without waiting, and on scale down will delete all pods at once.
replicas
integer
replicas is the desired number of replicas of the given Template. These are replicas in the sense that they are instantiations of the same Template, but individual replicas also have a consistent identity. If unspecified, defaults to 1.
revisionHistoryLimit
integer
revisionHistoryLimit is the maximum number of revisions that will be maintained in the StatefulSet's revision history. The revision history consists of all revisions not represented by a currently applied StatefulSetSpec version. The default value is 10.
selector
LabelSelector
selector is a label query over pods that should match the replica count. It must match the pod template's labels. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectors
serviceName
string
serviceName is the name of the service that governs this StatefulSet. This service must exist before the StatefulSet, and is responsible for the network identity of the set. Pods get DNS/hostnames that follow the pattern: pod-specific-string.serviceName.default.svc.cluster.local where "pod-specific-string" is managed by the StatefulSet controller.
template
PodTemplateSpec
template is the object that describes the pod that will be created if insufficient replicas are detected. Each pod stamped out by the StatefulSet will fulfill this Template, but have a unique identity from the rest of the StatefulSet. Each pod will be named with the format <statefulsetname>-<podindex>. For example, a pod in a StatefulSet named "web" with index number "3" would be named "web-3". The only allowed template.spec.restartPolicy value is "Always".
updateStrategy
StatefulSetUpdateStrategy
updateStrategy indicates the StatefulSetUpdateStrategy that will be employed to update Pods in the StatefulSet when a revision is made to Template.
volumeClaimTemplates
PersistentVolumeClaim array
volumeClaimTemplates is a list of claims that pods are allowed to reference. The StatefulSet controller is responsible for mapping network identities to claims in a way that maintains the identity of a pod. Every claim in this list must have at least one matching (by name) volumeMount in one container in the template. A claim in this list takes precedence over any volumes in the template, with the same name.

StatefulSetStatus v1 apps

Appears In:
FieldDescription
availableReplicas
integer
Total number of available pods (ready for at least minReadySeconds) targeted by this statefulset.
collisionCount
integer
collisionCount is the count of hash collisions for the StatefulSet. The StatefulSet controller uses this field as a collision avoidance mechanism when it needs to create the name for the newest ControllerRevision.
conditions
StatefulSetCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a statefulset's current state.
currentReplicas
integer
currentReplicas is the number of Pods created by the StatefulSet controller from the StatefulSet version indicated by currentRevision.
currentRevision
string
currentRevision, if not empty, indicates the version of the StatefulSet used to generate Pods in the sequence [0,currentReplicas).
observedGeneration
integer
observedGeneration is the most recent generation observed for this StatefulSet. It corresponds to the StatefulSet's generation, which is updated on mutation by the API Server.
readyReplicas
integer
readyReplicas is the number of pods created for this StatefulSet with a Ready Condition.
replicas
integer
replicas is the number of Pods created by the StatefulSet controller.
updateRevision
string
updateRevision, if not empty, indicates the version of the StatefulSet used to generate Pods in the sequence [replicas-updatedReplicas,replicas)
updatedReplicas
integer
updatedReplicas is the number of Pods created by the StatefulSet controller from the StatefulSet version indicated by updateRevision.

StatefulSetList v1 apps

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
StatefulSet array
Items is the list of stateful sets.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StatefulSet

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StatefulSet

Response

CodeDescription
200
StatefulSet
OK
201
StatefulSet
Created
202
StatefulSet
Accepted

Patch

partially update the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StatefulSet
OK
201
StatefulSet
Created

Replace

replace the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StatefulSet

Response

CodeDescription
200
StatefulSet
OK
201
StatefulSet
Created

Delete

delete a StatefulSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of StatefulSet

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StatefulSet
OK

List

list or watch objects of kind StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
StatefulSetList
OK

List All Namespaces

list or watch objects of kind StatefulSet

HTTP Request

GET /apis/apps/v1/statefulsets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
StatefulSetList
OK

Watch

watch changes to an object of kind StatefulSet. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/statefulsets/{name}

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of StatefulSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/statefulsets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of StatefulSet. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/statefulsets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StatefulSet
OK
201
StatefulSet
Created

Read Status

read status of the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StatefulSet
OK

Replace Status

replace status of the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/status

Path Parameters

ParameterDescription
namename of the StatefulSet
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StatefulSet

Response

CodeDescription
200
StatefulSet
OK
201
StatefulSet
Created

Misc Operations

Read Scale

read scale of the specified StatefulSet

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Scale
OK

Replace Scale

replace scale of the specified StatefulSet

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Scale

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Patch Scale

partially update scale of the specified StatefulSet

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/statefulsets/{name}/scale

Path Parameters

ParameterDescription
namename of the Scale
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Scale
OK
201
Scale
Created

Service

Service API resources are responsible for stitching your workloads together into an accessible Loadbalanced Service. By default, Workloads are only accessible within the cluster, and they must be exposed externally using a either a *LoadBalancer* or *NodePort* Service. For development, internally accessible Workloads can be accessed via proxy through the api master using the kubectl proxy command.

Common resource types:

  • Services for providing a single ip endpoint loadbalanced across multiple Workload replicas.
  • Ingress for providing a https(s) endpoint http(s) routed to one or more *Services*.

Endpoints v1 core

GroupVersionKind
corev1Endpoints
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
subsets
EndpointSubset array
The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.

EndpointsList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Endpoints array
List of endpoints.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create Endpoints

HTTP Request

POST /api/v1/namespaces/{namespace}/endpoints

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Endpoints

Response

CodeDescription
200
Endpoints
OK
201
Endpoints
Created
202
Endpoints
Accepted

Patch

partially update the specified Endpoints

HTTP Request

PATCH /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

ParameterDescription
namename of the Endpoints
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Endpoints
OK
201
Endpoints
Created

Replace

replace the specified Endpoints

HTTP Request

PUT /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

ParameterDescription
namename of the Endpoints
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Endpoints

Response

CodeDescription
200
Endpoints
OK
201
Endpoints
Created

Delete

delete Endpoints

HTTP Request

DELETE /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

ParameterDescription
namename of the Endpoints
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Endpoints

HTTP Request

DELETE /api/v1/namespaces/{namespace}/endpoints

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Endpoints

HTTP Request

GET /api/v1/namespaces/{namespace}/endpoints/{name}

Path Parameters

ParameterDescription
namename of the Endpoints
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Endpoints
OK

List

list or watch objects of kind Endpoints

HTTP Request

GET /api/v1/namespaces/{namespace}/endpoints

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EndpointsList
OK

List All Namespaces

list or watch objects of kind Endpoints

HTTP Request

GET /api/v1/endpoints

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EndpointsList
OK

Watch

watch changes to an object of kind Endpoints. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/endpoints/{name}

Path Parameters

ParameterDescription
namename of the Endpoints
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/endpoints

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Endpoints. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/endpoints

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

EndpointSlice v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1EndpointSlice
FieldDescription
addressType
string
addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
endpoints
Endpoint array
endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata.
ports
EndpointPort array
ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

EndpointSliceList v1 discovery

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
EndpointSlice array
items is the list of endpoint slices
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata.

Write Operations

Create

create an EndpointSlice

HTTP Request

POST /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
EndpointSlice

Response

CodeDescription
200
EndpointSlice
OK
201
EndpointSlice
Created
202
EndpointSlice
Accepted

Patch

partially update the specified EndpointSlice

HTTP Request

PATCH /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

ParameterDescription
namename of the EndpointSlice
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
EndpointSlice
OK
201
EndpointSlice
Created

Replace

replace the specified EndpointSlice

HTTP Request

PUT /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

ParameterDescription
namename of the EndpointSlice
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
EndpointSlice

Response

CodeDescription
200
EndpointSlice
OK
201
EndpointSlice
Created

Delete

delete an EndpointSlice

HTTP Request

DELETE /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

ParameterDescription
namename of the EndpointSlice
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of EndpointSlice

HTTP Request

DELETE /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices/{name}

Path Parameters

ParameterDescription
namename of the EndpointSlice
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
EndpointSlice
OK

List

list or watch objects of kind EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/namespaces/{namespace}/endpointslices

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EndpointSliceList
OK

List All Namespaces

list or watch objects of kind EndpointSlice

HTTP Request

GET /apis/discovery.k8s.io/v1/endpointslices

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EndpointSliceList
OK

Watch

watch changes to an object of kind EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/namespaces/{namespace}/endpointslices/{name}

Path Parameters

ParameterDescription
namename of the EndpointSlice
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/namespaces/{namespace}/endpointslices

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of EndpointSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/discovery.k8s.io/v1/watch/endpointslices

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Ingress v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1Ingress
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
IngressSpec
spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
IngressStatus
status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IngressSpec v1 networking

FieldDescription
defaultBackend
IngressBackend
defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
ingressClassName
string
ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
rules
IngressRule array
rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
tls
IngressTLS array
tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.

IngressStatus v1 networking

FieldDescription
loadBalancer
IngressLoadBalancerStatus
loadBalancer contains the current status of the load-balancer.

IngressList v1 networking

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Ingress array
items is the list of Ingress.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an Ingress

HTTP Request

POST /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Ingress

Response

CodeDescription
200
Ingress
OK
201
Ingress
Created
202
Ingress
Accepted

Patch

partially update the specified Ingress

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Ingress
OK
201
Ingress
Created

Replace

replace the specified Ingress

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Ingress

Response

CodeDescription
200
Ingress
OK
201
Ingress
Created

Delete

delete an Ingress

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Ingress

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Ingress
OK

List

list or watch objects of kind Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
IngressList
OK

List All Namespaces

list or watch objects of kind Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/ingresses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
IngressList
OK

Watch

watch changes to an object of kind Ingress. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/ingresses/{name}

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Ingress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/ingresses

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Ingress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingresses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Ingress

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Ingress
OK
201
Ingress
Created

Read Status

read status of the specified Ingress

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Ingress
OK

Replace Status

replace status of the specified Ingress

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status

Path Parameters

ParameterDescription
namename of the Ingress
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Ingress

Response

CodeDescription
200
Ingress
OK
201
Ingress
Created

IngressClass v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressClass
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
IngressClassSpec
spec is the desired state of the IngressClass. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IngressClassSpec v1 networking

FieldDescription
controller
string
controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
parameters
IngressClassParametersReference
parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.

IngressClassList v1 networking

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
IngressClass array
items is the list of IngressClasses.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata.

Write Operations

Create

create an IngressClass

HTTP Request

POST /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
IngressClass

Response

CodeDescription
200
IngressClass
OK
201
IngressClass
Created
202
IngressClass
Accepted

Patch

partially update the specified IngressClass

HTTP Request

PATCH /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

ParameterDescription
namename of the IngressClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
IngressClass
OK
201
IngressClass
Created

Replace

replace the specified IngressClass

HTTP Request

PUT /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

ParameterDescription
namename of the IngressClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
IngressClass

Response

CodeDescription
200
IngressClass
OK
201
IngressClass
Created

Delete

delete an IngressClass

HTTP Request

DELETE /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

ParameterDescription
namename of the IngressClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of IngressClass

HTTP Request

DELETE /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified IngressClass

HTTP Request

GET /apis/networking.k8s.io/v1/ingressclasses/{name}

Path Parameters

ParameterDescription
namename of the IngressClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
IngressClass
OK

List

list or watch objects of kind IngressClass

HTTP Request

GET /apis/networking.k8s.io/v1/ingressclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
IngressClassList
OK

Watch

watch changes to an object of kind IngressClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingressclasses/{name}

Path Parameters

ParameterDescription
namename of the IngressClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of IngressClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/ingressclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Service v1 core

Service Config to load balance traffic across all Pods with the app=nginx label. Receives on and sends to port 80. Exposes an externally accessible endpoint.
kind: Service
apiVersion: v1
metadata:
  # Unique key of the Service instance
  name: service-example
spec:
  ports:
    # Accept traffic sent to port 80
    - name: http
      port: 80
      targetPort: 80
  selector:
    # Loadbalance traffic across Pods matching
    # this label selector
    app: nginx
  # Create an HA proxy in the cloud provider
  # with an External IP address - *Only supported
  # by some cloud providers*
  type: LoadBalancer
GroupVersionKind
corev1Service
Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
ServiceSpec
Spec defines the behavior of a service. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
ServiceStatus
Most recently observed status of the service. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ServiceSpec v1 core

Appears In:
FieldDescription
allocateLoadBalancerNodePorts
boolean
allocateLoadBalancerNodePorts defines if NodePorts will be automatically allocated for services with type LoadBalancer. Default is "true". It may be set to "false" if the cluster load-balancer does not rely on NodePorts. If the caller requests specific NodePorts (by specifying a value), those requests will be respected, regardless of this field. This field may only be set for services with type LoadBalancer and will be cleared if the type is changed to any other type.
clusterIP
string
clusterIP is the IP address of the service and is usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be blank) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
clusterIPs
string array
ClusterIPs is a list of IP addresses assigned to this service, and are usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be empty) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. If this field is not specified, it will be initialized from the clusterIP field. If this field is specified, clients must ensure that clusterIPs[0] and clusterIP have the same value. This field may hold a maximum of two entries (dual-stack IPs, in either order). These IPs must correspond to the values of the ipFamilies field. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
externalIPs
string array
externalIPs is a list of IP addresses for which nodes in the cluster will also accept traffic for this service. These IPs are not managed by Kubernetes. The user is responsible for ensuring that traffic arrives at a node with this IP. A common example is external load-balancers that are not part of the Kubernetes system.
externalName
string
externalName is the external reference that discovery mechanisms will return as an alias for this service (e.g. a DNS CNAME record). No proxying will be involved. Must be a lowercase RFC-1123 hostname (https://tools.ietf.org/html/rfc1123) and requires `type` to be "ExternalName".
externalTrafficPolicy
string
externalTrafficPolicy describes how nodes distribute service traffic they receive on one of the Service's "externally-facing" addresses (NodePorts, ExternalIPs, and LoadBalancer IPs). If set to "Local", the proxy will configure the service in a way that assumes that external load balancers will take care of balancing the service traffic between nodes, and so each node will deliver traffic only to the node-local endpoints of the service, without masquerading the client source IP. (Traffic mistakenly sent to a node with no endpoints will be dropped.) The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features). Note that traffic sent to an External IP or LoadBalancer IP from within the cluster will always get "Cluster" semantics, but clients sending to a NodePort from within the cluster may need to take traffic policy into account when picking a node.
healthCheckNodePort
integer
healthCheckNodePort specifies the healthcheck nodePort for the service. This only applies when type is set to LoadBalancer and externalTrafficPolicy is set to Local. If a value is specified, is in-range, and is not in use, it will be used. If not specified, a value will be automatically allocated. External systems (e.g. load-balancers) can use this port to determine if a given node holds endpoints for this service or not. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type). This field cannot be updated once set.
internalTrafficPolicy
string
InternalTrafficPolicy describes how nodes distribute service traffic they receive on the ClusterIP. If set to "Local", the proxy will assume that pods only want to talk to endpoints of the service on the same node as the pod, dropping the traffic if there are no local endpoints. The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features).
ipFamilies
string array
IPFamilies is a list of IP families (e.g. IPv4, IPv6) assigned to this service. This field is usually assigned automatically based on cluster configuration and the ipFamilyPolicy field. If this field is specified manually, the requested family is available in the cluster, and ipFamilyPolicy allows it, it will be used; otherwise creation of the service will fail. This field is conditionally mutable: it allows for adding or removing a secondary IP family, but it does not allow changing the primary IP family of the Service. Valid values are "IPv4" and "IPv6". This field only applies to Services of types ClusterIP, NodePort, and LoadBalancer, and does apply to "headless" services. This field will be wiped when updating a Service to type ExternalName. This field may hold a maximum of two entries (dual-stack families, in either order). These families must correspond to the values of the clusterIPs field, if specified. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field.
ipFamilyPolicy
string
IPFamilyPolicy represents the dual-stack-ness requested or required by this Service. If there is no value provided, then this field will be set to SingleStack. Services can be "SingleStack" (a single IP family), "PreferDualStack" (two IP families on dual-stack configured clusters or a single IP family on single-stack clusters), or "RequireDualStack" (two IP families on dual-stack configured clusters, otherwise fail). The ipFamilies and clusterIPs fields depend on the value of this field. This field will be wiped when updating a service to type ExternalName.
loadBalancerClass
string
loadBalancerClass is the class of the load balancer implementation this Service belongs to. If specified, the value of this field must be a label-style identifier, with an optional prefix, e.g. "internal-vip" or "example.com/internal-vip". Unprefixed names are reserved for end-users. This field can only be set when the Service type is 'LoadBalancer'. If not set, the default load balancer implementation is used, today this is typically done through the cloud provider integration, but should apply for any default implementation. If set, it is assumed that a load balancer implementation is watching for Services with a matching class. Any default load balancer implementation (e.g. cloud providers) should ignore Services that set this field. This field can only be set when creating or updating a Service to type 'LoadBalancer'. Once set, it can not be changed. This field will be wiped when a service is updated to a non 'LoadBalancer' type.
loadBalancerIP
string
Only applies to Service Type: LoadBalancer. This feature depends on whether the underlying cloud-provider supports specifying the loadBalancerIP when a load balancer is created. This field will be ignored if the cloud-provider does not support the feature. Deprecated: This field was under-specified and its meaning varies across implementations. Using it is non-portable and it may not support dual-stack. Users are encouraged to use implementation-specific annotations when available.
loadBalancerSourceRanges
string array
If specified and supported by the platform, this will restrict traffic through the cloud-provider load-balancer will be restricted to the specified client IPs. This field will be ignored if the cloud-provider does not support the feature." More info: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/
ports
ServicePort array
patch strategy: merge
patch merge key: port
The list of ports that are exposed by this service. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
publishNotReadyAddresses
boolean
publishNotReadyAddresses indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready. The primary use case for setting this field is for a StatefulSet's Headless Service to propagate SRV DNS records for its Pods for the purpose of peer discovery. The Kubernetes controllers that generate Endpoints and EndpointSlice resources for Services interpret this to mean that all endpoints are considered "ready" even if the Pods themselves are not. Agents which consume only Kubernetes generated endpoints through the Endpoints or EndpointSlice resources can safely assume this behavior.
selector
object
Route service traffic to pods with label keys and values matching this selector. If empty or not present, the service is assumed to have an external process managing its endpoints, which Kubernetes will not modify. Only applies to types ClusterIP, NodePort, and LoadBalancer. Ignored if type is ExternalName. More info: https://kubernetes.io/docs/concepts/services-networking/service/
sessionAffinity
string
Supports "ClientIP" and "None". Used to maintain session affinity. Enable client IP based session affinity. Must be ClientIP or None. Defaults to None. More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
sessionAffinityConfig
SessionAffinityConfig
sessionAffinityConfig contains the configurations of session affinity.
trafficDistribution
string
TrafficDistribution offers a way to express preferences for how traffic is distributed to Service endpoints. Implementations can use this field as a hint, but are not required to guarantee strict adherence. If the field is not set, the implementation will apply its default routing strategy. If set to "PreferClose", implementations should prioritize endpoints that are topologically close (e.g., same zone).
type
string
type determines how the Service is exposed. Defaults to ClusterIP. Valid options are ExternalName, ClusterIP, NodePort, and LoadBalancer. "ClusterIP" allocates a cluster-internal IP address for load-balancing to endpoints. Endpoints are determined by the selector or if that is not specified, by manual construction of an Endpoints object or EndpointSlice objects. If clusterIP is "None", no virtual IP is allocated and the endpoints are published as a set of endpoints rather than a virtual IP. "NodePort" builds on ClusterIP and allocates a port on every node which routes to the same endpoints as the clusterIP. "LoadBalancer" builds on NodePort and creates an external load-balancer (if supported in the current cloud) which routes to the same endpoints as the clusterIP. "ExternalName" aliases this service to the specified externalName. Several other fields do not apply to ExternalName services. More info: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types

ServiceStatus v1 core

Appears In:
FieldDescription
conditions
Condition array
patch strategy: merge
patch merge key: type
Current service state
loadBalancer
LoadBalancerStatus
LoadBalancer contains the current status of the load-balancer, if one is present.

ServiceList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Service array
List of services
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

kubectl command
$ echo 'kind: Service
apiVersion: v1
metadata:
  name: service-example
spec:
  ports:
    - name: http
      port: 80
      targetPort: 80
  selector:
      app: nginx
  type: LoadBalancer
' | kubectl create -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X POST -H 'Content-Type: application/yaml' --data '
kind: Service
apiVersion: v1
metadata:
  name: service-example
spec:
  ports:
    - name: http
      port: 80
      targetPort: 80
  selector:
      app: nginx
  type: LoadBalancer
' http://127.0.0.1:8001/api/v1/namespaces/default/services
Output
service "service-example" created
Response Body
{
  "kind": "Service",
  "apiVersion": "v1",
  "metadata": {
    "name": "service-example",
    "namespace": "default",
    "selfLink": "/api/v1/namespaces/default/services/service-example",
    "uid": "93e5c731-9d30-11e6-9c54-42010a800148",
    "resourceVersion": "2205767",
    "creationTimestamp": "2016-10-28T17:04:24Z"
  },
  "spec": {
    "ports": [
      {
        "name": "http",
        "protocol": "TCP",
        "port": 80,
        "targetPort": 80,
        "nodePort": 32417
      }
    ],
    "selector": {
      "app": "nginx"
    },
    "clusterIP": "10.183.250.161",
    "type": "LoadBalancer",
    "sessionAffinity": "None"
  },
  "status": {
    "loadBalancer": {}
  }
}

create a Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Service

Response

CodeDescription
200
Service
OK
201
Service
Created
202
Service
Accepted

Patch

kubectl command
$ kubectl patch service  -p \
	'{"spec":{"ports":[{"name":"http","port":80,"targetPort":8080}]}}'
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X PATCH -H 'Content-Type: application/strategic-merge-patch+json' --data '
{"spec":{"ports":[{"name":"http","port":80,"targetPort":8080}]}}' \
	'http://127.0.0.1:8001/api/v1/namespaces/default/services/'
Output
"" patched
Response Body
{
  "kind": "Service",
  "apiVersion": "v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/api/v1/namespaces/default/services/deployment-example",
    "uid": "93e5c731-9d30-11e6-9c54-42010a800148",
    "resourceVersion": "2205995",
    "creationTimestamp": "2016-10-28T17:04:24Z"
  },
  "spec": {
    "ports": [
      {
        "name": "http",
        "protocol": "TCP",
        "port": 80,
        "targetPort": 8080,
        "nodePort": 32417
      }
    ],
    "selector": {
      "app": "nginx"
    },
    "clusterIP": "10.183.250.161",
    "type": "LoadBalancer",
    "sessionAffinity": "None"
  },
  "status": {
    "loadBalancer": {
      "ingress": [
        {
          "ip": "104.198.186.106"
        }
      ]
    }
  }
}

partially update the specified Service

HTTP Request

PATCH /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Service
OK
201
Service
Created

Replace

kubectl command
$ echo 'apiVersion: v1
kind: Service
metadata:
  name: deployment-example
  resourceVersion: "2205995"
spec:
  clusterIP: 10.183.250.161
  ports:
  - name: http
    nodePort: 32417
    port: 80
    protocol: TCP
    targetPort: 8080
  selector:
    app: nginx
  sessionAffinity: None
  type: LoadBalancer
' | kubectl replace -f -
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X PUT -H 'Content-Type: application/yaml' --data '
apiVersion: v1
kind: Service
metadata:
  name: deployment-example
  resourceVersion: "2205995"
spec:
  clusterIP: 10.183.250.161
  ports:
  - name: http
    nodePort: 32417
    port: 80
    protocol: TCP
    targetPort: 8080
  selector:
    app: nginx
  sessionAffinity: None
  type: LoadBalancer
' http://127.0.0.1:8001/api/v1/namespaces/default/services/deployment-example
Output
service "deployment-example" replaced
Response Body
{
  "kind": "Service",
  "apiVersion": "v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/api/v1/namespaces/default/services/deployment-example",
    "uid": "93e5c731-9d30-11e6-9c54-42010a800148",
    "resourceVersion": "2208672",
    "creationTimestamp": "2016-10-28T17:04:24Z"
  },
  "spec": {
    "ports": [
      {
        "name": "http",
        "protocol": "TCP",
        "port": 80,
        "targetPort": 8080,
        "nodePort": 32417
      }
    ],
    "selector": {
      "app": "nginx"
    },
    "clusterIP": "10.183.250.161",
    "type": "LoadBalancer",
    "sessionAffinity": "None"
  },
  "status": {
    "loadBalancer": {
      "ingress": [
        {
          "ip": "104.198.186.106"
        }
      ]
    }
  }
}

replace the specified Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Service

Response

CodeDescription
200
Service
OK
201
Service
Created

Delete

kubectl command
$ kubectl delete service deployment-example
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X DELETE -H 'Content-Type: application/yaml' --data '
gracePeriodSeconds: 0
orphanDependents: false
' 'http://127.0.0.1:8001/api/v1/namespaces/default/services/deployment-example'
Output
service "deployment-example" deleted
Response Body
{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {},
  "status": "Success",
  "code": 200
}

delete a Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Service
OK
202
Service
Accepted

Delete Collection

delete collection of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

kubectl command
$ kubectl get service deployment-example -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET http://127.0.0.1:8001/api/v1/namespaces/default/services/deployment-example
Output
{
  "kind": "Service",
  "apiVersion": "v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/api/v1/namespaces/default/services/deployment-example",
    "uid": "93e5c731-9d30-11e6-9c54-42010a800148",
    "resourceVersion": "2205995",
    "creationTimestamp": "2016-10-28T17:04:24Z"
  },
  "spec": {
    "ports": [
      {
        "name": "http",
        "protocol": "TCP",
        "port": 80,
        "targetPort": 8080,
        "nodePort": 32417
      }
    ],
    "selector": {
      "app": "nginx"
    },
    "clusterIP": "10.183.250.161",
    "type": "LoadBalancer",
    "sessionAffinity": "None"
  },
  "status": {
    "loadBalancer": {
      "ingress": [
        {
          "ip": "104.198.186.106"
        }
      ]
    }
  }
}
Response Body
{
  "kind": "Service",
  "apiVersion": "v1",
  "metadata": {
    "name": "deployment-example",
    "namespace": "default",
    "selfLink": "/api/v1/namespaces/default/services/deployment-example",
    "uid": "93e5c731-9d30-11e6-9c54-42010a800148",
    "resourceVersion": "2205995",
    "creationTimestamp": "2016-10-28T17:04:24Z"
  },
  "spec": {
    "ports": [
      {
        "name": "http",
        "protocol": "TCP",
        "port": 80,
        "targetPort": 8080,
        "nodePort": 32417
      }
    ],
    "selector": {
      "app": "nginx"
    },
    "clusterIP": "10.183.250.161",
    "type": "LoadBalancer",
    "sessionAffinity": "None"
  },
  "status": {
    "loadBalancer": {
      "ingress": [
        {
          "ip": "104.198.186.106"
        }
      ]
    }
  }
}

read the specified Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Service
OK

List

kubectl command
$ kubectl get service -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/api/v1/namespaces/default/services'

list or watch objects of kind Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ServiceList
OK

List All Namespaces

list or watch objects of kind Service

HTTP Request

GET /api/v1/services

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ServiceList
OK

Watch

kubectl command
$ kubectl get service deployment-example --watch -o json
curl command (requires kubectl proxy to be running)
$ kubectl proxy
$ curl -X GET 'http://127.0.0.1:8001/api/v1/watch/namespaces/default/services/deployment-example'
Output
{
	"type": "ADDED",
	"object": {
		"kind": "Service",
		"apiVersion": "v1",
		"metadata": {
			"name": "deployment-example",
			"namespace": "default",
			"selfLink": "/api/v1/namespaces/default/services/deployment-example",
			"uid": "93e5c731-9d30-11e6-9c54-42010a800148",
			"resourceVersion": "2205995",
			"creationTimestamp": "2016-10-28T17:04:24Z"
		},
		"spec": {
			"ports": [
				{
					"name": "http",
					"protocol": "TCP",
					"port": 80,
					"targetPort": 8080,
					"nodePort": 32417
				}
			],
			"selector": {
				"app": "nginx"
			},
			"clusterIP": "10.183.250.161",
			"type": "LoadBalancer",
			"sessionAffinity": "None"
		},
		"status": {
			"loadBalancer": {
				"ingress": [
					{
						"ip": "104.198.186.106"
					}
				]
			}
		}
	}
}
Response Body
{
	"type": "ADDED",
	"object": {
		"kind": "Service",
		"apiVersion": "v1",
		"metadata": {
			"name": "deployment-example",
			"namespace": "default",
			"selfLink": "/api/v1/namespaces/default/services/deployment-example",
			"uid": "93e5c731-9d30-11e6-9c54-42010a800148",
			"resourceVersion": "2205995",
			"creationTimestamp": "2016-10-28T17:04:24Z"
		},
		"spec": {
			"ports": [
				{
					"name": "http",
					"protocol": "TCP",
					"port": 80,
					"targetPort": 8080,
					"nodePort": 32417
				}
			],
			"selector": {
				"app": "nginx"
			},
			"clusterIP": "10.183.250.161",
			"type": "LoadBalancer",
			"sessionAffinity": "None"
		},
		"status": {
			"loadBalancer": {
				"ingress": [
					{
						"ip": "104.198.186.106"
					}
				]
			}
		}
	}
}

watch changes to an object of kind Service. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/services/{name}

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Service. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/services

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Service. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/services

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Service

HTTP Request

PATCH /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Service
OK
201
Service
Created

Read Status

read status of the specified Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Service
OK

Replace Status

replace status of the specified Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/status

Path Parameters

ParameterDescription
namename of the Service
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Service

Response

CodeDescription
200
Service
OK
201
Service
Created

Proxy Operations

Create Connect Proxy

connect POST requests to proxy of Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Create Connect Proxy Path

connect POST requests to proxy of Service

HTTP Request

POST /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Delete Connect Proxy

connect DELETE requests to proxy of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Service

HTTP Request

DELETE /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Get Connect Proxy

connect GET requests to proxy of Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Get Connect Proxy Path

connect GET requests to proxy of Service

HTTP Request

GET /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Head Connect Proxy

connect HEAD requests to proxy of Service

HTTP Request

HEAD /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Head Connect Proxy Path

connect HEAD requests to proxy of Service

HTTP Request

HEAD /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Replace Connect Proxy

connect PUT requests to proxy of Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/proxy

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Replace Connect Proxy Path

connect PUT requests to proxy of Service

HTTP Request

PUT /api/v1/namespaces/{namespace}/services/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the ServiceProxyOptions
namespaceobject name and auth scope, such as for teams and projects
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the part of URLs that include service endpoints, suffixes, and parameters to use for the current proxy request to service. For example, the whole request URL is http://localhost/api/v1/namespaces/kube-system/services/elasticsearch-logging/_search?q=user:kimchy. Path is _search?q=user:kimchy.

Response

CodeDescription
200
string
OK

Config & Storage

Config and Storage resources are responsible for injecting data into your applications and persisting data externally to your container.

Common resource types:

  • ConfigMaps for providing text key value pairs injected into the application through environment variables, command line arguments, or files
  • Secrets for providing binary data injected into the application through files
  • Volumes for providing a filesystem external to the Container. Maybe shared across Containers within the same Pod and have a lifetime persisting beyond a Container or Pod.

ConfigMap v1 core

GroupVersionKind
corev1ConfigMap
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
binaryData
object
BinaryData contains the binary data. Each key must consist of alphanumeric characters, '-', '_' or '.'. BinaryData can contain byte sequences that are not in the UTF-8 range. The keys stored in BinaryData must not overlap with the ones in the Data field, this is enforced during validation process. Using this field will require 1.10+ apiserver and kubelet.
data
object
Data contains the configuration data. Each key must consist of alphanumeric characters, '-', '_' or '.'. Values with non-UTF-8 byte sequences must use the BinaryData field. The keys stored in Data must not overlap with the keys in the BinaryData field, this is enforced during validation process.
immutable
boolean
Immutable, if set to true, ensures that data stored in the ConfigMap cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

ConfigMapList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ConfigMap array
Items is the list of ConfigMaps.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ConfigMap

HTTP Request

POST /api/v1/namespaces/{namespace}/configmaps

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ConfigMap

Response

CodeDescription
200
ConfigMap
OK
201
ConfigMap
Created
202
ConfigMap
Accepted

Patch

partially update the specified ConfigMap

HTTP Request

PATCH /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

ParameterDescription
namename of the ConfigMap
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ConfigMap
OK
201
ConfigMap
Created

Replace

replace the specified ConfigMap

HTTP Request

PUT /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

ParameterDescription
namename of the ConfigMap
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ConfigMap

Response

CodeDescription
200
ConfigMap
OK
201
ConfigMap
Created

Delete

delete a ConfigMap

HTTP Request

DELETE /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

ParameterDescription
namename of the ConfigMap
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ConfigMap

HTTP Request

DELETE /api/v1/namespaces/{namespace}/configmaps

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ConfigMap

HTTP Request

GET /api/v1/namespaces/{namespace}/configmaps/{name}

Path Parameters

ParameterDescription
namename of the ConfigMap
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ConfigMap
OK

List

list or watch objects of kind ConfigMap

HTTP Request

GET /api/v1/namespaces/{namespace}/configmaps

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ConfigMapList
OK

List All Namespaces

list or watch objects of kind ConfigMap

HTTP Request

GET /api/v1/configmaps

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ConfigMapList
OK

Watch

watch changes to an object of kind ConfigMap. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/configmaps/{name}

Path Parameters

ParameterDescription
namename of the ConfigMap
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ConfigMap. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/configmaps

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ConfigMap. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/configmaps

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

CSIDriver v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1CSIDriver
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata. metadata.Name indicates the name of the CSI driver that this object refers to; it MUST be the same name returned by the CSI GetPluginName() call for that driver. The driver name must be 63 characters or less, beginning and ending with an alphanumeric character ([a-z0-9A-Z]) with dashes (-), dots (.), and alphanumerics between. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
CSIDriverSpec
spec represents the specification of the CSI Driver.

CSIDriverSpec v1 storage

FieldDescription
attachRequired
boolean
attachRequired indicates this CSI volume driver requires an attach operation (because it implements the CSI ControllerPublishVolume() method), and that the Kubernetes attach detach controller should call the attach volume interface which checks the volumeattachment status and waits until the volume is attached before proceeding to mounting. The CSI external-attacher coordinates with CSI volume driver and updates the volumeattachment status when the attach operation is complete. If the CSIDriverRegistry feature gate is enabled and the value is specified to false, the attach operation will be skipped. Otherwise the attach operation will be called. This field is immutable.
fsGroupPolicy
string
fsGroupPolicy defines if the underlying volume supports changing ownership and permission of the volume before being mounted. Refer to the specific FSGroupPolicy values for additional details. This field was immutable in Kubernetes < 1.29 and now is mutable. Defaults to ReadWriteOnceWithFSType, which will examine each volume to determine if Kubernetes should modify ownership and permissions of the volume. With the default policy the defined fsGroup will only be applied if a fstype is defined and the volume's access mode contains ReadWriteOnce.
podInfoOnMount
boolean
podInfoOnMount indicates this CSI volume driver requires additional pod information (like podName, podUID, etc.) during mount operations, if set to true. If set to false, pod information will not be passed on mount. Default is false. The CSI driver specifies podInfoOnMount as part of driver deployment. If true, Kubelet will pass pod information as VolumeContext in the CSI NodePublishVolume() calls. The CSI driver is responsible for parsing and validating the information passed in as VolumeContext. The following VolumeContext will be passed if podInfoOnMount is set to true. This list might grow, but the prefix will be used. "csi.storage.k8s.io/pod.name": pod.Name "csi.storage.k8s.io/pod.namespace": pod.Namespace "csi.storage.k8s.io/pod.uid": string(pod.UID) "csi.storage.k8s.io/ephemeral": "true" if the volume is an ephemeral inline volume defined by a CSIVolumeSource, otherwise "false" "csi.storage.k8s.io/ephemeral" is a new feature in Kubernetes 1.16. It is only required for drivers which support both the "Persistent" and "Ephemeral" VolumeLifecycleMode. Other drivers can leave pod info disabled and/or ignore this field. As Kubernetes 1.15 doesn't support this field, drivers can only support one mode when deployed on such a cluster and the deployment determines which mode that is, for example via a command line parameter of the driver. This field was immutable in Kubernetes < 1.29 and now is mutable.
requiresRepublish
boolean
requiresRepublish indicates the CSI driver wants `NodePublishVolume` being periodically called to reflect any possible change in the mounted volume. This field defaults to false. Note: After a successful initial NodePublishVolume call, subsequent calls to NodePublishVolume should only update the contents of the volume. New mount points will not be seen by a running container.
seLinuxMount
boolean
seLinuxMount specifies if the CSI driver supports "-o context" mount option. When "true", the CSI driver must ensure that all volumes provided by this CSI driver can be mounted separately with different `-o context` options. This is typical for storage backends that provide volumes as filesystems on block devices or as independent shared volumes. Kubernetes will call NodeStage / NodePublish with "-o context=xyz" mount option when mounting a ReadWriteOncePod volume used in Pod that has explicitly set SELinux context. In the future, it may be expanded to other volume AccessModes. In any case, Kubernetes will ensure that the volume is mounted only with a single SELinux context. When "false", Kubernetes won't pass any special SELinux mount options to the driver. This is typical for volumes that represent subdirectories of a bigger shared filesystem. Default is "false".
storageCapacity
boolean
storageCapacity indicates that the CSI volume driver wants pod scheduling to consider the storage capacity that the driver deployment will report by creating CSIStorageCapacity objects with capacity information, if set to true. The check can be enabled immediately when deploying a driver. In that case, provisioning new volumes with late binding will pause until the driver deployment has published some suitable CSIStorageCapacity object. Alternatively, the driver can be deployed with the field unset or false and it can be flipped later when storage capacity information has been published. This field was immutable in Kubernetes <= 1.22 and now is mutable.
tokenRequests
TokenRequest array
tokenRequests indicates the CSI driver needs pods' service account tokens it is mounting volume for to do necessary authentication. Kubelet will pass the tokens in VolumeContext in the CSI NodePublishVolume calls. The CSI driver should parse and validate the following VolumeContext: "csi.storage.k8s.io/serviceAccount.tokens": { "<audience>": { "token": <token>, "expirationTimestamp": <expiration timestamp in RFC3339>, }, ... } Note: Audience in each TokenRequest should be different and at most one token is empty string. To receive a new token after expiry, RequiresRepublish can be used to trigger NodePublishVolume periodically.
volumeLifecycleModes
string array
volumeLifecycleModes defines what kind of volumes this CSI volume driver supports. The default if the list is empty is "Persistent", which is the usage defined by the CSI specification and implemented in Kubernetes via the usual PV/PVC mechanism. The other mode is "Ephemeral". In this mode, volumes are defined inline inside the pod spec with CSIVolumeSource and their lifecycle is tied to the lifecycle of that pod. A driver has to be aware of this because it is only going to get a NodePublishVolume call for such a volume. For more information about implementing this mode, see https://kubernetes-csi.github.io/docs/ephemeral-local-volumes.html A driver can support one or more of these modes and more modes may be added in the future. This field is beta. This field is immutable.

CSIDriverList v1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CSIDriver array
items is the list of CSIDriver
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSIDriver

HTTP Request

POST /apis/storage.k8s.io/v1/csidrivers

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSIDriver

Response

CodeDescription
200
CSIDriver
OK
201
CSIDriver
Created
202
CSIDriver
Accepted

Patch

partially update the specified CSIDriver

HTTP Request

PATCH /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

ParameterDescription
namename of the CSIDriver

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CSIDriver
OK
201
CSIDriver
Created

Replace

replace the specified CSIDriver

HTTP Request

PUT /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

ParameterDescription
namename of the CSIDriver

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSIDriver

Response

CodeDescription
200
CSIDriver
OK
201
CSIDriver
Created

Delete

delete a CSIDriver

HTTP Request

DELETE /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

ParameterDescription
namename of the CSIDriver

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
CSIDriver
OK
202
CSIDriver
Accepted

Delete Collection

delete collection of CSIDriver

HTTP Request

DELETE /apis/storage.k8s.io/v1/csidrivers

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CSIDriver

HTTP Request

GET /apis/storage.k8s.io/v1/csidrivers/{name}

Path Parameters

ParameterDescription
namename of the CSIDriver

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CSIDriver
OK

List

list or watch objects of kind CSIDriver

HTTP Request

GET /apis/storage.k8s.io/v1/csidrivers

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CSIDriverList
OK

Watch

watch changes to an object of kind CSIDriver. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csidrivers/{name}

Path Parameters

ParameterDescription
namename of the CSIDriver

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CSIDriver. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csidrivers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

CSINode v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1CSINode
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. metadata.name must be the Kubernetes node name.
spec
CSINodeSpec
spec is the specification of CSINode

CSINodeSpec v1 storage

Appears In:
FieldDescription
drivers
CSINodeDriver array
patch strategy: merge
patch merge key: name
drivers is a list of information of all CSI Drivers existing on a node. If all drivers in the list are uninstalled, this can become empty.

CSINodeList v1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CSINode array
items is the list of CSINode
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSINode

HTTP Request

POST /apis/storage.k8s.io/v1/csinodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSINode

Response

CodeDescription
200
CSINode
OK
201
CSINode
Created
202
CSINode
Accepted

Patch

partially update the specified CSINode

HTTP Request

PATCH /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

ParameterDescription
namename of the CSINode

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CSINode
OK
201
CSINode
Created

Replace

replace the specified CSINode

HTTP Request

PUT /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

ParameterDescription
namename of the CSINode

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSINode

Response

CodeDescription
200
CSINode
OK
201
CSINode
Created

Delete

delete a CSINode

HTTP Request

DELETE /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

ParameterDescription
namename of the CSINode

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
CSINode
OK
202
CSINode
Accepted

Delete Collection

delete collection of CSINode

HTTP Request

DELETE /apis/storage.k8s.io/v1/csinodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CSINode

HTTP Request

GET /apis/storage.k8s.io/v1/csinodes/{name}

Path Parameters

ParameterDescription
namename of the CSINode

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CSINode
OK

List

list or watch objects of kind CSINode

HTTP Request

GET /apis/storage.k8s.io/v1/csinodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CSINodeList
OK

Watch

watch changes to an object of kind CSINode. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csinodes/{name}

Path Parameters

ParameterDescription
namename of the CSINode

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CSINode. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csinodes

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Secret v1 core

GroupVersionKind
corev1Secret
Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
data
object
Data contains the secret data. Each key must consist of alphanumeric characters, '-', '_' or '.'. The serialized form of the secret data is a base64 encoded string, representing the arbitrary (possibly non-string) data value here. Described in https://tools.ietf.org/html/rfc4648#section-4
immutable
boolean
Immutable, if set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
stringData
object
stringData allows specifying non-binary secret data in string form. It is provided as a write-only input field for convenience. All keys and values are merged into the data field on write, overwriting any existing values. The stringData field is never output when reading from the API.
type
string
Used to facilitate programmatic handling of secret data. More info: https://kubernetes.io/docs/concepts/configuration/secret/#secret-types

SecretList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Secret array
Items is a list of secret objects. More info: https://kubernetes.io/docs/concepts/configuration/secret
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Secret

HTTP Request

POST /api/v1/namespaces/{namespace}/secrets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Secret

Response

CodeDescription
200
Secret
OK
201
Secret
Created
202
Secret
Accepted

Patch

partially update the specified Secret

HTTP Request

PATCH /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

ParameterDescription
namename of the Secret
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Secret
OK
201
Secret
Created

Replace

replace the specified Secret

HTTP Request

PUT /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

ParameterDescription
namename of the Secret
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Secret

Response

CodeDescription
200
Secret
OK
201
Secret
Created

Delete

delete a Secret

HTTP Request

DELETE /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

ParameterDescription
namename of the Secret
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Secret

HTTP Request

DELETE /api/v1/namespaces/{namespace}/secrets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Secret

HTTP Request

GET /api/v1/namespaces/{namespace}/secrets/{name}

Path Parameters

ParameterDescription
namename of the Secret
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Secret
OK

List

list or watch objects of kind Secret

HTTP Request

GET /api/v1/namespaces/{namespace}/secrets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
SecretList
OK

List All Namespaces

list or watch objects of kind Secret

HTTP Request

GET /api/v1/secrets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
SecretList
OK

Watch

watch changes to an object of kind Secret. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/secrets/{name}

Path Parameters

ParameterDescription
namename of the Secret
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Secret. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/secrets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Secret. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/secrets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

PersistentVolumeClaim v1 core

GroupVersionKind
corev1PersistentVolumeClaim
A PersistentVolume must be allocated in the cluster to use this.
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PersistentVolumeClaimSpec
spec defines the desired characteristics of a volume requested by a pod author. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
status
PersistentVolumeClaimStatus
status represents the current information/status of a persistent volume claim. Read-only. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims

PersistentVolumeClaimSpec v1 core

FieldDescription
accessModes
string array
accessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1
dataSource
TypedLocalObjectReference
dataSource field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An existing PVC (PersistentVolumeClaim) If the provisioner or an external controller can support the specified data source, it will create a new volume based on the contents of the specified data source. When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. If the namespace is specified, then dataSourceRef will not be copied to dataSource.
dataSourceRef
TypedObjectReference
dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired. This may be any object from a non-empty API group (non core object) or a PersistentVolumeClaim object. When this field is specified, volume binding will only succeed if the type of the specified object matches some installed volume populator or dynamic provisioner. This field will replace the functionality of the dataSource field and as such if both fields are non-empty, they must have the same value. For backwards compatibility, when namespace isn't specified in dataSourceRef, both fields (dataSource and dataSourceRef) will be set to the same value automatically if one of them is empty and the other is non-empty. When namespace is specified in dataSourceRef, dataSource isn't set to the same value and must be empty. There are three important differences between dataSource and dataSourceRef: * While dataSource only allows two specific types of objects, dataSourceRef allows any non-core object, as well as PersistentVolumeClaim objects. * While dataSource ignores disallowed values (dropping them), dataSourceRef preserves all values, and generates an error if a disallowed value is specified. * While dataSource only allows local objects, dataSourceRef allows objects in any namespaces. (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled.
resources
VolumeResourceRequirements
resources represents the minimum resources the volume should have. If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements that are lower than previous value but must still be higher than capacity recorded in the status field of the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources
selector
LabelSelector
selector is a label query over volumes to consider for binding.
storageClassName
string
storageClassName is the name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1
volumeAttributesClassName
string
volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. If specified, the CSI driver will create or update the volume with the attributes defined in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass will be applied to the claim but it's not allowed to reset this field to empty string once it is set. If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass will be set by the persistentvolume controller if it exists. If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource exists. More info: https://kubernetes.io/docs/concepts/storage/volume-attributes-classes/ (Alpha) Using this field requires the VolumeAttributesClass feature gate to be enabled.
volumeMode
string
volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec.
volumeName
string
volumeName is the binding reference to the PersistentVolume backing this claim.

PersistentVolumeClaimStatus v1 core

FieldDescription
accessModes
string array
accessModes contains the actual access modes the volume backing the PVC has. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1
allocatedResourceStatuses
object
allocatedResourceStatuses stores status of resource being resized for the given PVC. Key names follow standard Kubernetes label syntax. Valid values are either: * Un-prefixed keys: - storage - the capacity of the volume. * Custom resources must use implementation-defined prefixed names such as "example.com/my-custom-resource" Apart from above values - keys that are unprefixed or have kubernetes.io prefix are considered reserved and hence may not be used. ClaimResourceStatus can be in any of following states: - ControllerResizeInProgress: State set when resize controller starts resizing the volume in control-plane. - ControllerResizeFailed: State set when resize has failed in resize controller with a terminal error. - NodeResizePending: State set when resize controller has finished resizing the volume but further resizing of volume is needed on the node. - NodeResizeInProgress: State set when kubelet starts resizing the volume. - NodeResizeFailed: State set when resizing has failed in kubelet with a terminal error. Transient errors don't set NodeResizeFailed. For example: if expanding a PVC for more capacity - this field can be one of the following states: - pvc.status.allocatedResourceStatus['storage'] = "ControllerResizeInProgress" - pvc.status.allocatedResourceStatus['storage'] = "ControllerResizeFailed" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizePending" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizeInProgress" - pvc.status.allocatedResourceStatus['storage'] = "NodeResizeFailed" When this field is not set, it means that no resize operation is in progress for the given PVC. A controller that receives PVC update with previously unknown resourceName or ClaimResourceStatus should ignore the update for the purpose it was designed. For example - a controller that only is responsible for resizing capacity of the volume, should ignore PVC updates that change other valid resources associated with PVC. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature.
allocatedResources
object
allocatedResources tracks the resources allocated to a PVC including its capacity. Key names follow standard Kubernetes label syntax. Valid values are either: * Un-prefixed keys: - storage - the capacity of the volume. * Custom resources must use implementation-defined prefixed names such as "example.com/my-custom-resource" Apart from above values - keys that are unprefixed or have kubernetes.io prefix are considered reserved and hence may not be used. Capacity reported here may be larger than the actual capacity when a volume expansion operation is requested. For storage quota, the larger value from allocatedResources and PVC.spec.resources is used. If allocatedResources is not set, PVC.spec.resources alone is used for quota calculation. If a volume expansion capacity request is lowered, allocatedResources is only lowered if there are no expansion operations in progress and if the actual volume capacity is equal or lower than the requested capacity. A controller that receives PVC update with previously unknown resourceName should ignore the update for the purpose it was designed. For example - a controller that only is responsible for resizing capacity of the volume, should ignore PVC updates that change other valid resources associated with PVC. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature.
capacity
object
capacity represents the actual resources of the underlying volume.
conditions
PersistentVolumeClaimCondition array
patch strategy: merge
patch merge key: type
conditions is the current Condition of persistent volume claim. If underlying persistent volume is being resized then the Condition will be set to 'Resizing'.
currentVolumeAttributesClassName
string
currentVolumeAttributesClassName is the current name of the VolumeAttributesClass the PVC is using. When unset, there is no VolumeAttributeClass applied to this PersistentVolumeClaim This is an alpha field and requires enabling VolumeAttributesClass feature.
modifyVolumeStatus
ModifyVolumeStatus
ModifyVolumeStatus represents the status object of ControllerModifyVolume operation. When this is unset, there is no ModifyVolume operation being attempted. This is an alpha field and requires enabling VolumeAttributesClass feature.
phase
string
phase represents the current phase of PersistentVolumeClaim.

PersistentVolumeClaimList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PersistentVolumeClaim array
items is a list of persistent volume claims. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PersistentVolumeClaim

HTTP Request

POST /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolumeClaim

Response

CodeDescription
200
PersistentVolumeClaim
OK
201
PersistentVolumeClaim
Created
202
PersistentVolumeClaim
Accepted

Patch

partially update the specified PersistentVolumeClaim

HTTP Request

PATCH /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PersistentVolumeClaim
OK
201
PersistentVolumeClaim
Created

Replace

replace the specified PersistentVolumeClaim

HTTP Request

PUT /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolumeClaim

Response

CodeDescription
200
PersistentVolumeClaim
OK
201
PersistentVolumeClaim
Created

Delete

delete a PersistentVolumeClaim

HTTP Request

DELETE /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
PersistentVolumeClaim
OK
202
PersistentVolumeClaim
Accepted

Delete Collection

delete collection of PersistentVolumeClaim

HTTP Request

DELETE /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PersistentVolumeClaim
OK

List

list or watch objects of kind PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PersistentVolumeClaimList
OK

List All Namespaces

list or watch objects of kind PersistentVolumeClaim

HTTP Request

GET /api/v1/persistentvolumeclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PersistentVolumeClaimList
OK

Watch

watch changes to an object of kind PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/persistentvolumeclaims/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/persistentvolumeclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of PersistentVolumeClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/persistentvolumeclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PersistentVolumeClaim

HTTP Request

PATCH /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PersistentVolumeClaim
OK
201
PersistentVolumeClaim
Created

Read Status

read status of the specified PersistentVolumeClaim

HTTP Request

GET /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PersistentVolumeClaim
OK

Replace Status

replace status of the specified PersistentVolumeClaim

HTTP Request

PUT /api/v1/namespaces/{namespace}/persistentvolumeclaims/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolumeClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolumeClaim

Response

CodeDescription
200
PersistentVolumeClaim
OK
201
PersistentVolumeClaim
Created

StorageClass v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1StorageClass
FieldDescription
allowVolumeExpansion
boolean
allowVolumeExpansion shows whether the storage class allow volume expand.
allowedTopologies
TopologySelectorTerm array
allowedTopologies restrict the node topologies where volumes can be dynamically provisioned. Each volume plugin defines its own supported topology specifications. An empty TopologySelectorTerm list means there is no topology restriction. This field is only honored by servers that enable the VolumeScheduling feature.
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
mountOptions
string array
mountOptions controls the mountOptions for dynamically provisioned PersistentVolumes of this storage class. e.g. ["ro", "soft"]. Not validated - mount of the PVs will simply fail if one is invalid.
parameters
object
parameters holds the parameters for the provisioner that should create volumes of this storage class.
provisioner
string
provisioner indicates the type of the provisioner.
reclaimPolicy
string
reclaimPolicy controls the reclaimPolicy for dynamically provisioned PersistentVolumes of this storage class. Defaults to Delete.
volumeBindingMode
string
volumeBindingMode indicates how PersistentVolumeClaims should be provisioned and bound. When unset, VolumeBindingImmediate is used. This field is only honored by servers that enable the VolumeScheduling feature.

StorageClassList v1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
StorageClass array
items is the list of StorageClasses
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageClass

HTTP Request

POST /apis/storage.k8s.io/v1/storageclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageClass

Response

CodeDescription
200
StorageClass
OK
201
StorageClass
Created
202
StorageClass
Accepted

Patch

partially update the specified StorageClass

HTTP Request

PATCH /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

ParameterDescription
namename of the StorageClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StorageClass
OK
201
StorageClass
Created

Replace

replace the specified StorageClass

HTTP Request

PUT /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

ParameterDescription
namename of the StorageClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageClass

Response

CodeDescription
200
StorageClass
OK
201
StorageClass
Created

Delete

delete a StorageClass

HTTP Request

DELETE /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

ParameterDescription
namename of the StorageClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
StorageClass
OK
202
StorageClass
Accepted

Delete Collection

delete collection of StorageClass

HTTP Request

DELETE /apis/storage.k8s.io/v1/storageclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified StorageClass

HTTP Request

GET /apis/storage.k8s.io/v1/storageclasses/{name}

Path Parameters

ParameterDescription
namename of the StorageClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StorageClass
OK

List

list or watch objects of kind StorageClass

HTTP Request

GET /apis/storage.k8s.io/v1/storageclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
StorageClassList
OK

Watch

watch changes to an object of kind StorageClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/storageclasses/{name}

Path Parameters

ParameterDescription
namename of the StorageClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of StorageClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/storageclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

CSIStorageCapacity v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1CSIStorageCapacity
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
capacity
Quantity
capacity is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. The semantic is currently (CSI spec 1.2) defined as: The available capacity, in bytes, of the storage that can be used to provision volumes. If not set, that information is currently unavailable.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
maximumVolumeSize
Quantity
maximumVolumeSize is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. This is defined since CSI spec 1.4.0 as the largest size that may be used in a CreateVolumeRequest.capacity_range.required_bytes field to create a volume with the same parameters as those in GetCapacityRequest. The corresponding value in the Kubernetes API is ResourceRequirements.Requests in a volume claim.
metadata
ObjectMeta
Standard object's metadata. The name has no particular meaning. It must be a DNS subdomain (dots allowed, 253 characters). To ensure that there are no conflicts with other CSI drivers on the cluster, the recommendation is to use csisc-<uuid>, a generated name, or a reverse-domain name which ends with the unique CSI driver name. Objects are namespaced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
nodeTopology
LabelSelector
nodeTopology defines which nodes have access to the storage for which capacity was reported. If not set, the storage is not accessible from any node in the cluster. If empty, the storage is accessible from all nodes. This field is immutable.
storageClassName
string
storageClassName represents the name of the StorageClass that the reported capacity applies to. It must meet the same requirements as the name of a StorageClass object (non-empty, DNS subdomain). If that object no longer exists, the CSIStorageCapacity object is obsolete and should be removed by its creator. This field is immutable.

CSIStorageCapacityList v1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CSIStorageCapacity array
items is the list of CSIStorageCapacity objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CSIStorageCapacity

HTTP Request

POST /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSIStorageCapacity

Response

CodeDescription
200
CSIStorageCapacity
OK
201
CSIStorageCapacity
Created
202
CSIStorageCapacity
Accepted

Patch

partially update the specified CSIStorageCapacity

HTTP Request

PATCH /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

ParameterDescription
namename of the CSIStorageCapacity
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CSIStorageCapacity
OK
201
CSIStorageCapacity
Created

Replace

replace the specified CSIStorageCapacity

HTTP Request

PUT /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

ParameterDescription
namename of the CSIStorageCapacity
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CSIStorageCapacity

Response

CodeDescription
200
CSIStorageCapacity
OK
201
CSIStorageCapacity
Created

Delete

delete a CSIStorageCapacity

HTTP Request

DELETE /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

ParameterDescription
namename of the CSIStorageCapacity
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of CSIStorageCapacity

HTTP Request

DELETE /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

ParameterDescription
namename of the CSIStorageCapacity
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CSIStorageCapacity
OK

List

list or watch objects of kind CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/namespaces/{namespace}/csistoragecapacities

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CSIStorageCapacityList
OK

List All Namespaces

list or watch objects of kind CSIStorageCapacity

HTTP Request

GET /apis/storage.k8s.io/v1/csistoragecapacities

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CSIStorageCapacityList
OK

Watch

watch changes to an object of kind CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/namespaces/{namespace}/csistoragecapacities/{name}

Path Parameters

ParameterDescription
namename of the CSIStorageCapacity
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/namespaces/{namespace}/csistoragecapacities

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of CSIStorageCapacity. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/csistoragecapacities

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Volume v1 core

GroupVersionKind
corev1Volume
Appears In:
FieldDescription
awsElasticBlockStore
AWSElasticBlockStoreVolumeSource
awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
azureDisk
AzureDiskVolumeSource
azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.
azureFile
AzureFileVolumeSource
azureFile represents an Azure File Service mount on the host and bind mount to the pod.
cephfs
CephFSVolumeSource
cephFS represents a Ceph FS mount on the host that shares a pod's lifetime
cinder
CinderVolumeSource
cinder represents a cinder volume attached and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
configMap
ConfigMapVolumeSource
configMap represents a configMap that should populate this volume
csi
CSIVolumeSource
csi (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers (Beta feature).
downwardAPI
DownwardAPIVolumeSource
downwardAPI represents downward API about the pod that should populate this volume
emptyDir
EmptyDirVolumeSource
emptyDir represents a temporary directory that shares a pod's lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
ephemeral
EphemeralVolumeSource
ephemeral represents a volume that is handled by a cluster storage driver. The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, and deleted when the pod is removed. Use this if: a) the volume is only needed while the pod runs, b) features of normal volumes like restoring from snapshot or capacity tracking are needed, c) the storage driver is specified through a storage class, and d) the storage driver supports dynamic volume provisioning through a PersistentVolumeClaim (see EphemeralVolumeSource for more information on the connection between this volume type and PersistentVolumeClaim). Use PersistentVolumeClaim or one of the vendor-specific APIs for volumes that persist for longer than the lifecycle of an individual pod. Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to be used that way - see the documentation of the driver for more information. A pod can use both types of ephemeral volumes and persistent volumes at the same time.
fc
FCVolumeSource
fc represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod.
flexVolume
FlexVolumeSource
flexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.
flocker
FlockerVolumeSource
flocker represents a Flocker volume attached to a kubelet's host machine. This depends on the Flocker control service being running
gcePersistentDisk
GCEPersistentDiskVolumeSource
gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
gitRepo
GitRepoVolumeSource
gitRepo represents a git repository at a particular revision. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.
glusterfs
GlusterfsVolumeSource
glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. More info: https://examples.k8s.io/volumes/glusterfs/README.md
hostPath
HostPathVolumeSource
hostPath represents a pre-existing file or directory on the host machine that is directly exposed to the container. This is generally used for system agents or other privileged things that are allowed to see the host machine. Most containers will NOT need this. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
iscsi
ISCSIVolumeSource
iscsi represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md
name
string
name of the volume. Must be a DNS_LABEL and unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
nfs
NFSVolumeSource
nfs represents an NFS mount on the host that shares a pod's lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
persistentVolumeClaim
PersistentVolumeClaimVolumeSource
persistentVolumeClaimVolumeSource represents a reference to a PersistentVolumeClaim in the same namespace. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
photonPersistentDisk
PhotonPersistentDiskVolumeSource
photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine
portworxVolume
PortworxVolumeSource
portworxVolume represents a portworx volume attached and mounted on kubelets host machine
projected
ProjectedVolumeSource
projected items for all in one resources secrets, configmaps, and downward API
quobyte
QuobyteVolumeSource
quobyte represents a Quobyte mount on the host that shares a pod's lifetime
rbd
RBDVolumeSource
rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. More info: https://examples.k8s.io/volumes/rbd/README.md
scaleIO
ScaleIOVolumeSource
scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes.
secret
SecretVolumeSource
secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret
storageos
StorageOSVolumeSource
storageOS represents a StorageOS volume attached and mounted on Kubernetes nodes.
vsphereVolume
VsphereVirtualDiskVolumeSource
vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine

VolumeAttachment v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1VolumeAttachment
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
VolumeAttachmentSpec
spec represents specification of the desired attach/detach volume behavior. Populated by the Kubernetes system.
status
VolumeAttachmentStatus
status represents status of the VolumeAttachment request. Populated by the entity completing the attach or detach operation, i.e. the external-attacher.

VolumeAttachmentSpec v1 storage

FieldDescription
attacher
string
attacher indicates the name of the volume driver that MUST handle this request. This is the name returned by GetPluginName().
nodeName
string
nodeName represents the node that the volume should be attached to.
source
VolumeAttachmentSource
source represents the volume that should be attached.

VolumeAttachmentStatus v1 storage

FieldDescription
attachError
VolumeError
attachError represents the last error encountered during attach operation, if any. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
attached
boolean
attached indicates the volume is successfully attached. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
attachmentMetadata
object
attachmentMetadata is populated with any information returned by the attach operation, upon successful attach, that must be passed into subsequent WaitForAttach or Mount calls. This field must only be set by the entity completing the attach operation, i.e. the external-attacher.
detachError
VolumeError
detachError represents the last error encountered during detach operation, if any. This field must only be set by the entity completing the detach operation, i.e. the external-attacher.

VolumeAttachmentList v1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
VolumeAttachment array
items is the list of VolumeAttachments
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a VolumeAttachment

HTTP Request

POST /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
VolumeAttachment

Response

CodeDescription
200
VolumeAttachment
OK
201
VolumeAttachment
Created
202
VolumeAttachment
Accepted

Patch

partially update the specified VolumeAttachment

HTTP Request

PATCH /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
VolumeAttachment
OK
201
VolumeAttachment
Created

Replace

replace the specified VolumeAttachment

HTTP Request

PUT /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
VolumeAttachment

Response

CodeDescription
200
VolumeAttachment
OK
201
VolumeAttachment
Created

Delete

delete a VolumeAttachment

HTTP Request

DELETE /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
VolumeAttachment
OK
202
VolumeAttachment
Accepted

Delete Collection

delete collection of VolumeAttachment

HTTP Request

DELETE /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
VolumeAttachment
OK

List

list or watch objects of kind VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
VolumeAttachmentList
OK

Watch

watch changes to an object of kind VolumeAttachment. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/volumeattachments/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of VolumeAttachment. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1/watch/volumeattachments

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified VolumeAttachment

HTTP Request

PATCH /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
VolumeAttachment
OK
201
VolumeAttachment
Created

Read Status

read status of the specified VolumeAttachment

HTTP Request

GET /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
VolumeAttachment
OK

Replace Status

replace status of the specified VolumeAttachment

HTTP Request

PUT /apis/storage.k8s.io/v1/volumeattachments/{name}/status

Path Parameters

ParameterDescription
namename of the VolumeAttachment

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
VolumeAttachment

Response

CodeDescription
200
VolumeAttachment
OK
201
VolumeAttachment
Created

VolumeAttributesClass v1alpha1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1alpha1VolumeAttributesClass
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
driverName
string
Name of the CSI driver This field is immutable.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
parameters
object
parameters hold volume attributes defined by the CSI driver. These values are opaque to the Kubernetes and are passed directly to the CSI driver. The underlying storage provider supports changing these attributes on an existing volume, however the parameters field itself is immutable. To invoke a volume update, a new VolumeAttributesClass should be created with new parameters, and the PersistentVolumeClaim should be updated to reference the new VolumeAttributesClass. This field is required and must contain at least one key/value pair. The keys cannot be empty, and the maximum number of parameters is 512, with a cumulative max size of 256K. If the CSI driver rejects invalid parameters, the target PersistentVolumeClaim will be set to an "Infeasible" state in the modifyVolumeStatus field.

VolumeAttributesClassList v1alpha1 storage

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
VolumeAttributesClass array
items is the list of VolumeAttributesClass objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a VolumeAttributesClass

HTTP Request

POST /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
VolumeAttributesClass

Response

CodeDescription
200
VolumeAttributesClass
OK
201
VolumeAttributesClass
Created
202
VolumeAttributesClass
Accepted

Patch

partially update the specified VolumeAttributesClass

HTTP Request

PATCH /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttributesClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
VolumeAttributesClass
OK
201
VolumeAttributesClass
Created

Replace

replace the specified VolumeAttributesClass

HTTP Request

PUT /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttributesClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
VolumeAttributesClass

Response

CodeDescription
200
VolumeAttributesClass
OK
201
VolumeAttributesClass
Created

Delete

delete a VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttributesClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
VolumeAttributesClass
OK
202
VolumeAttributesClass
Accepted

Delete Collection

delete collection of VolumeAttributesClass

HTTP Request

DELETE /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/volumeattributesclasses/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttributesClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
VolumeAttributesClass
OK

List

list or watch objects of kind VolumeAttributesClass

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/volumeattributesclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
VolumeAttributesClassList
OK

Watch

watch changes to an object of kind VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/watch/volumeattributesclasses/{name}

Path Parameters

ParameterDescription
namename of the VolumeAttributesClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of VolumeAttributesClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storage.k8s.io/v1alpha1/watch/volumeattributesclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Metadata

Metadata resources are responsible for configuring behavior of your other Resources within the Cluster.

Common resource types:

  • HorizontalPodAutoscaler (HPA) for automatically scaling the replicacount of your workloads in response to load.
  • PodDisruptionBudget for configuring how many replicas in a given workload maybe made concurrently unavailable when performing maintenance.
  • Event for notification of resource lifecycle events in the cluster.

ClusterTrustBundle v1alpha1 certificates.k8s.io

GroupVersionKind
certificates.k8s.iov1alpha1ClusterTrustBundle
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
metadata contains the object metadata.
spec
ClusterTrustBundleSpec
spec contains the signer (if any) and trust anchors.

ClusterTrustBundleSpec v1alpha1 certificates

FieldDescription
signerName
string
signerName indicates the associated signer, if any. In order to create or update a ClusterTrustBundle that sets signerName, you must have the following cluster-scoped permission: group=certificates.k8s.io resource=signers resourceName=<the signer name> verb=attest. If signerName is not empty, then the ClusterTrustBundle object must be named with the signer name as a prefix (translating slashes to colons). For example, for the signer name `example.com/foo`, valid ClusterTrustBundle object names include `example.com:foo:abc` and `example.com:foo:v1`. If signerName is empty, then the ClusterTrustBundle object's name must not have such a prefix. List/watch requests for ClusterTrustBundles can filter on this field using a `spec.signerName=NAME` field selector.
trustBundle
string
trustBundle contains the individual X.509 trust anchors for this bundle, as PEM bundle of PEM-wrapped, DER-formatted X.509 certificates. The data must consist only of PEM certificate blocks that parse as valid X.509 certificates. Each certificate must include a basic constraints extension with the CA bit set. The API server will reject objects that contain duplicate certificates, or that use PEM block headers. Users of ClusterTrustBundles, including Kubelet, are free to reorder and deduplicate certificate blocks in this file according to their own logic, as well as to drop PEM block headers and inter-block data.

ClusterTrustBundleList v1alpha1 certificates

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ClusterTrustBundle array
items is a collection of ClusterTrustBundle objects
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
metadata contains the list metadata.

Write Operations

Create

create a ClusterTrustBundle

HTTP Request

POST /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterTrustBundle

Response

CodeDescription
200
ClusterTrustBundle
OK
201
ClusterTrustBundle
Created
202
ClusterTrustBundle
Accepted

Patch

partially update the specified ClusterTrustBundle

HTTP Request

PATCH /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

ParameterDescription
namename of the ClusterTrustBundle

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ClusterTrustBundle
OK
201
ClusterTrustBundle
Created

Replace

replace the specified ClusterTrustBundle

HTTP Request

PUT /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

ParameterDescription
namename of the ClusterTrustBundle

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterTrustBundle

Response

CodeDescription
200
ClusterTrustBundle
OK
201
ClusterTrustBundle
Created

Delete

delete a ClusterTrustBundle

HTTP Request

DELETE /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

ParameterDescription
namename of the ClusterTrustBundle

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ClusterTrustBundle

HTTP Request

DELETE /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ClusterTrustBundle

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/clustertrustbundles/{name}

Path Parameters

ParameterDescription
namename of the ClusterTrustBundle

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ClusterTrustBundle
OK

List

list or watch objects of kind ClusterTrustBundle

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/clustertrustbundles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ClusterTrustBundleList
OK

Watch

watch changes to an object of kind ClusterTrustBundle. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/watch/clustertrustbundles/{name}

Path Parameters

ParameterDescription
namename of the ClusterTrustBundle

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ClusterTrustBundle. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/certificates.k8s.io/v1alpha1/watch/clustertrustbundles

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ControllerRevision v1 apps

GroupVersionKind
appsv1ControllerRevision
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
dataData is the serialized representation of the state.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
revision
integer
Revision indicates the revision of the state represented by Data.

ControllerRevisionList v1 apps

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ControllerRevision array
Items is the list of ControllerRevisions
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ControllerRevision

HTTP Request

POST /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ControllerRevision

Response

CodeDescription
200
ControllerRevision
OK
201
ControllerRevision
Created
202
ControllerRevision
Accepted

Patch

partially update the specified ControllerRevision

HTTP Request

PATCH /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

ParameterDescription
namename of the ControllerRevision
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ControllerRevision
OK
201
ControllerRevision
Created

Replace

replace the specified ControllerRevision

HTTP Request

PUT /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

ParameterDescription
namename of the ControllerRevision
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ControllerRevision

Response

CodeDescription
200
ControllerRevision
OK
201
ControllerRevision
Created

Delete

delete a ControllerRevision

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

ParameterDescription
namename of the ControllerRevision
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ControllerRevision

HTTP Request

DELETE /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ControllerRevision

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

ParameterDescription
namename of the ControllerRevision
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ControllerRevision
OK

List

list or watch objects of kind ControllerRevision

HTTP Request

GET /apis/apps/v1/namespaces/{namespace}/controllerrevisions

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ControllerRevisionList
OK

List All Namespaces

list or watch objects of kind ControllerRevision

HTTP Request

GET /apis/apps/v1/controllerrevisions

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ControllerRevisionList
OK

Watch

watch changes to an object of kind ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/controllerrevisions/{name}

Path Parameters

ParameterDescription
namename of the ControllerRevision
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/namespaces/{namespace}/controllerrevisions

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ControllerRevision. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apps/v1/watch/controllerrevisions

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

CustomResourceDefinition v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceDefinition
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
CustomResourceDefinitionSpec
spec describes how the user wants the resources to appear
status
CustomResourceDefinitionStatus
status indicates the actual state of the CustomResourceDefinition

CustomResourceDefinitionSpec v1 apiextensions

FieldDescription
conversion
CustomResourceConversion
conversion defines conversion settings for the CRD.
group
string
group is the API group of the defined custom resource. The custom resources are served under `/apis/<group>/...`. Must match the name of the CustomResourceDefinition (in the form `<names.plural>.<group>`).
names
CustomResourceDefinitionNames
names specify the resource and kind names for the custom resource.
preserveUnknownFields
boolean
preserveUnknownFields indicates that object fields which are not specified in the OpenAPI schema should be preserved when persisting to storage. apiVersion, kind, metadata and known fields inside metadata are always preserved. This field is deprecated in favor of setting `x-preserve-unknown-fields` to true in `spec.versions[*].schema.openAPIV3Schema`. See https://kubernetes.io/docs/tasks/extend-kubernetes/custom-resources/custom-resource-definitions/#field-pruning for details.
scope
string
scope indicates whether the defined custom resource is cluster- or namespace-scoped. Allowed values are `Cluster` and `Namespaced`.
versions
CustomResourceDefinitionVersion array
versions is the list of all API versions of the defined custom resource. Version names are used to compute the order in which served versions are listed in API discovery. If the version string is "kube-like", it will sort above non "kube-like" version strings, which are ordered lexicographically. "Kube-like" versions start with a "v", then are followed by a number (the major version), then optionally the string "alpha" or "beta" and another number (the minor version). These are sorted first by GA > beta > alpha (where GA is a version with no suffix such as beta or alpha), and then by comparing major version, then minor version. An example sorted list of versions: v10, v2, v1, v11beta2, v10beta3, v3beta1, v12alpha1, v11alpha2, foo1, foo10.

CustomResourceDefinitionStatus v1 apiextensions

FieldDescription
acceptedNames
CustomResourceDefinitionNames
acceptedNames are the names that are actually being used to serve discovery. They may be different than the names in spec.
conditions
CustomResourceDefinitionCondition array
conditions indicate state for particular aspects of a CustomResourceDefinition
storedVersions
string array
storedVersions lists all versions of CustomResources that were ever persisted. Tracking these versions allows a migration path for stored versions in etcd. The field is mutable so a migration controller can finish a migration to another version (ensuring no old objects are left in storage), and then remove the rest of the versions from this list. Versions may not be removed from `spec.versions` while they exist in this list.

CustomResourceDefinitionList v1 apiextensions

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CustomResourceDefinition array
items list individual CustomResourceDefinition objects
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a CustomResourceDefinition

HTTP Request

POST /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CustomResourceDefinition

Response

CodeDescription
200
CustomResourceDefinition
OK
201
CustomResourceDefinition
Created
202
CustomResourceDefinition
Accepted

Patch

partially update the specified CustomResourceDefinition

HTTP Request

PATCH /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CustomResourceDefinition
OK
201
CustomResourceDefinition
Created

Replace

replace the specified CustomResourceDefinition

HTTP Request

PUT /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CustomResourceDefinition

Response

CodeDescription
200
CustomResourceDefinition
OK
201
CustomResourceDefinition
Created

Delete

delete a CustomResourceDefinition

HTTP Request

DELETE /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of CustomResourceDefinition

HTTP Request

DELETE /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CustomResourceDefinition
OK

List

list or watch objects of kind CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CustomResourceDefinitionList
OK

Watch

watch changes to an object of kind CustomResourceDefinition. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apiextensions.k8s.io/v1/watch/customresourcedefinitions/{name}

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CustomResourceDefinition. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apiextensions.k8s.io/v1/watch/customresourcedefinitions

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified CustomResourceDefinition

HTTP Request

PATCH /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CustomResourceDefinition
OK
201
CustomResourceDefinition
Created

Read Status

read status of the specified CustomResourceDefinition

HTTP Request

GET /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CustomResourceDefinition
OK

Replace Status

replace status of the specified CustomResourceDefinition

HTTP Request

PUT /apis/apiextensions.k8s.io/v1/customresourcedefinitions/{name}/status

Path Parameters

ParameterDescription
namename of the CustomResourceDefinition

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CustomResourceDefinition

Response

CodeDescription
200
CustomResourceDefinition
OK
201
CustomResourceDefinition
Created

Event v1 events.k8s.io

GroupVersionKind
events.k8s.iov1Event
Appears In:
FieldDescription
action
string
action is what action was taken/failed regarding to the regarding object. It is machine-readable. This field cannot be empty for new Events and it can have at most 128 characters.
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
deprecatedCount
integer
deprecatedCount is the deprecated field assuring backward compatibility with core.v1 Event type.
deprecatedFirstTimestamp
Time
deprecatedFirstTimestamp is the deprecated field assuring backward compatibility with core.v1 Event type.
deprecatedLastTimestamp
Time
deprecatedLastTimestamp is the deprecated field assuring backward compatibility with core.v1 Event type.
deprecatedSource
EventSource
deprecatedSource is the deprecated field assuring backward compatibility with core.v1 Event type.
eventTime
MicroTime
eventTime is the time when this Event was first observed. It is required.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
note
string
note is a human-readable description of the status of this operation. Maximal length of the note is 1kB, but libraries should be prepared to handle values up to 64kB.
reason
string
reason is why the action was taken. It is human-readable. This field cannot be empty for new Events and it can have at most 128 characters.
regarding
ObjectReference
regarding contains the object this Event is about. In most cases it's an Object reporting controller implements, e.g. ReplicaSetController implements ReplicaSets and this event is emitted because it acts on some changes in a ReplicaSet object.
related
ObjectReference
related is the optional secondary object for more complex actions. E.g. when regarding object triggers a creation or deletion of related object.
reportingController
string
reportingController is the name of the controller that emitted this Event, e.g. `kubernetes.io/kubelet`. This field cannot be empty for new Events.
reportingInstance
string
reportingInstance is the ID of the controller instance, e.g. `kubelet-xyzf`. This field cannot be empty for new Events and it can have at most 128 characters.
series
EventSeries
series is data about the Event series this event represents or nil if it's a singleton Event.
type
string
type is the type of this event (Normal, Warning), new types could be added in the future. It is machine-readable. This field cannot be empty for new Events.

EventList v1 events

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Event array
items is a list of schema objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an Event

HTTP Request

POST /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Event

Response

CodeDescription
200
Event
OK
201
Event
Created
202
Event
Accepted

Patch

partially update the specified Event

HTTP Request

PATCH /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Event
OK
201
Event
Created

Replace

replace the specified Event

HTTP Request

PUT /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Event

Response

CodeDescription
200
Event
OK
201
Event
Created

Delete

delete an Event

HTTP Request

DELETE /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Event

HTTP Request

DELETE /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Event

HTTP Request

GET /apis/events.k8s.io/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Event
OK

List

list or watch objects of kind Event

HTTP Request

GET /apis/events.k8s.io/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EventList
OK

List All Namespaces

list or watch objects of kind Event

HTTP Request

GET /apis/events.k8s.io/v1/events

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EventList
OK

Watch

watch changes to an object of kind Event. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/events.k8s.io/v1/watch/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/events.k8s.io/v1/watch/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/events.k8s.io/v1/watch/events

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

LimitRange v1 core

GroupVersionKind
corev1LimitRange
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
LimitRangeSpec
Spec defines the limits enforced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

LimitRangeSpec v1 core

Appears In:
FieldDescription
limits
LimitRangeItem array
Limits is the list of LimitRangeItem objects that are enforced.

LimitRangeList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
LimitRange array
Items is a list of LimitRange objects. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a LimitRange

HTTP Request

POST /api/v1/namespaces/{namespace}/limitranges

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
LimitRange

Response

CodeDescription
200
LimitRange
OK
201
LimitRange
Created
202
LimitRange
Accepted

Patch

partially update the specified LimitRange

HTTP Request

PATCH /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

ParameterDescription
namename of the LimitRange
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
LimitRange
OK
201
LimitRange
Created

Replace

replace the specified LimitRange

HTTP Request

PUT /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

ParameterDescription
namename of the LimitRange
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
LimitRange

Response

CodeDescription
200
LimitRange
OK
201
LimitRange
Created

Delete

delete a LimitRange

HTTP Request

DELETE /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

ParameterDescription
namename of the LimitRange
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of LimitRange

HTTP Request

DELETE /api/v1/namespaces/{namespace}/limitranges

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified LimitRange

HTTP Request

GET /api/v1/namespaces/{namespace}/limitranges/{name}

Path Parameters

ParameterDescription
namename of the LimitRange
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
LimitRange
OK

List

list or watch objects of kind LimitRange

HTTP Request

GET /api/v1/namespaces/{namespace}/limitranges

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
LimitRangeList
OK

List All Namespaces

list or watch objects of kind LimitRange

HTTP Request

GET /api/v1/limitranges

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
LimitRangeList
OK

Watch

watch changes to an object of kind LimitRange. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/limitranges/{name}

Path Parameters

ParameterDescription
namename of the LimitRange
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of LimitRange. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/limitranges

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of LimitRange. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/limitranges

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

HorizontalPodAutoscaler v2 autoscaling

GroupVersionKind
autoscalingv2HorizontalPodAutoscaler
Other API versions of this object exist: v1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
metadata is the standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
HorizontalPodAutoscalerSpec
spec is the specification for the behaviour of the autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
status
HorizontalPodAutoscalerStatus
status is the current information about the autoscaler.

HorizontalPodAutoscalerSpec v2 autoscaling

FieldDescription
behavior
HorizontalPodAutoscalerBehavior
behavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively). If not set, the default HPAScalingRules for scale up and scale down are used.
maxReplicas
integer
maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
metrics
MetricSpec array
metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used). The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods. Ergo, metrics used must decrease as the pod count is increased, and vice-versa. See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
minReplicas
integer
minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down. It defaults to 1 pod. minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured. Scaling is active as long as at least one metric value is available.
scaleTargetRef
CrossVersionObjectReference
scaleTargetRef points to the target resource to scale, and is used to the pods for which metrics should be collected, as well as to actually change the replica count.

HorizontalPodAutoscalerStatus v2 autoscaling

FieldDescription
conditions
HorizontalPodAutoscalerCondition array
patch strategy: merge
patch merge key: type
conditions is the set of conditions required for this autoscaler to scale its target, and indicates whether or not those conditions are met.
currentMetrics
MetricStatus array
currentMetrics is the last read state of the metrics used by this autoscaler.
currentReplicas
integer
currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
desiredReplicas
integer
desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
lastScaleTime
Time
lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
observedGeneration
integer
observedGeneration is the most recent generation observed by this autoscaler.

HorizontalPodAutoscalerList v2 autoscaling

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
HorizontalPodAutoscaler array
items is the list of horizontal pod autoscaler objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
metadata is the standard list metadata.

Write Operations

Create

create a HorizontalPodAutoscaler

HTTP Request

POST /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created
202
HorizontalPodAutoscaler
Accepted

Patch

partially update the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Replace

replace the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Delete

delete a HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
HorizontalPodAutoscaler
OK

List

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
HorizontalPodAutoscalerList
OK

List All Namespaces

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/horizontalpodautoscalers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
HorizontalPodAutoscalerList
OK

Watch

watch changes to an object of kind HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/autoscaling/v2/watch/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v2/watch/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v2/watch/horizontalpodautoscalers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Read Status

read status of the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
HorizontalPodAutoscaler
OK

Replace Status

replace status of the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v2/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

MutatingWebhookConfiguration v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1MutatingWebhookConfiguration
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
webhooks
MutatingWebhook array
patch strategy: merge
patch merge key: name
Webhooks is a list of webhooks and the affected resources and operations.

MutatingWebhookConfigurationList v1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
MutatingWebhookConfiguration array
List of MutatingWebhookConfiguration.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a MutatingWebhookConfiguration

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
MutatingWebhookConfiguration

Response

CodeDescription
200
MutatingWebhookConfiguration
OK
201
MutatingWebhookConfiguration
Created
202
MutatingWebhookConfiguration
Accepted

Patch

partially update the specified MutatingWebhookConfiguration

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the MutatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
MutatingWebhookConfiguration
OK
201
MutatingWebhookConfiguration
Created

Replace

replace the specified MutatingWebhookConfiguration

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the MutatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
MutatingWebhookConfiguration

Response

CodeDescription
200
MutatingWebhookConfiguration
OK
201
MutatingWebhookConfiguration
Created

Delete

delete a MutatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the MutatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of MutatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified MutatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the MutatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
MutatingWebhookConfiguration
OK

List

list or watch objects of kind MutatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/mutatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
MutatingWebhookConfigurationList
OK

Watch

watch changes to an object of kind MutatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/mutatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the MutatingWebhookConfiguration

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of MutatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/mutatingwebhookconfigurations

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ValidatingWebhookConfiguration v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ValidatingWebhookConfiguration
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
webhooks
ValidatingWebhook array
patch strategy: merge
patch merge key: name
Webhooks is a list of webhooks and the affected resources and operations.

ValidatingWebhookConfigurationList v1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingWebhookConfiguration array
List of ValidatingWebhookConfiguration.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingWebhookConfiguration

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingWebhookConfiguration

Response

CodeDescription
200
ValidatingWebhookConfiguration
OK
201
ValidatingWebhookConfiguration
Created
202
ValidatingWebhookConfiguration
Accepted

Patch

partially update the specified ValidatingWebhookConfiguration

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the ValidatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingWebhookConfiguration
OK
201
ValidatingWebhookConfiguration
Created

Replace

replace the specified ValidatingWebhookConfiguration

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the ValidatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingWebhookConfiguration

Response

CodeDescription
200
ValidatingWebhookConfiguration
OK
201
ValidatingWebhookConfiguration
Created

Delete

delete a ValidatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the ValidatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingWebhookConfiguration

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the ValidatingWebhookConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingWebhookConfiguration
OK

List

list or watch objects of kind ValidatingWebhookConfiguration

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingwebhookconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingWebhookConfigurationList
OK

Watch

watch changes to an object of kind ValidatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingwebhookconfigurations/{name}

Path Parameters

ParameterDescription
namename of the ValidatingWebhookConfiguration

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingWebhookConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingwebhookconfigurations

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

PodSchedulingContext v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2PodSchedulingContext
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
spec
PodSchedulingContextSpec
Spec describes where resources for the Pod are needed.
status
PodSchedulingContextStatus
Status describes where resources for the Pod can be allocated.

PodSchedulingContextSpec v1alpha2 resource

FieldDescription
potentialNodes
string array
PotentialNodes lists nodes where the Pod might be able to run. The size of this field is limited to 128. This is large enough for many clusters. Larger clusters may need more attempts to find a node that suits all pending resources. This may get increased in the future, but not reduced.
selectedNode
string
SelectedNode is the node for which allocation of ResourceClaims that are referenced by the Pod and that use "WaitForFirstConsumer" allocation is to be attempted.

PodSchedulingContextStatus v1alpha2 resource

FieldDescription
resourceClaims
ResourceClaimSchedulingStatus array
ResourceClaims describes resource availability for each pod.spec.resourceClaim entry where the corresponding ResourceClaim uses "WaitForFirstConsumer" allocation mode.

PodSchedulingContextList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PodSchedulingContext array
Items is the list of PodSchedulingContext objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a PodSchedulingContext

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodSchedulingContext

Response

CodeDescription
200
PodSchedulingContext
OK
201
PodSchedulingContext
Created
202
PodSchedulingContext
Accepted

Patch

partially update the specified PodSchedulingContext

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PodSchedulingContext
OK
201
PodSchedulingContext
Created

Replace

replace the specified PodSchedulingContext

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodSchedulingContext

Response

CodeDescription
200
PodSchedulingContext
OK
201
PodSchedulingContext
Created

Delete

delete a PodSchedulingContext

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
PodSchedulingContext
OK
202
PodSchedulingContext
Accepted

Delete Collection

delete collection of PodSchedulingContext

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PodSchedulingContext

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PodSchedulingContext
OK

List

list or watch objects of kind PodSchedulingContext

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodSchedulingContextList
OK

List All Namespaces

list or watch objects of kind PodSchedulingContext

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/podschedulingcontexts

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodSchedulingContextList
OK

Watch

watch changes to an object of kind PodSchedulingContext. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/podschedulingcontexts/{name}

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PodSchedulingContext. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/podschedulingcontexts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of PodSchedulingContext. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/podschedulingcontexts

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PodSchedulingContext

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}/status

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PodSchedulingContext
OK
201
PodSchedulingContext
Created

Read Status

read status of the specified PodSchedulingContext

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}/status

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PodSchedulingContext
OK

Replace Status

replace status of the specified PodSchedulingContext

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/podschedulingcontexts/{name}/status

Path Parameters

ParameterDescription
namename of the PodSchedulingContext
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodSchedulingContext

Response

CodeDescription
200
PodSchedulingContext
OK
201
PodSchedulingContext
Created

PodTemplate v1 core

GroupVersionKind
corev1PodTemplate
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
template
PodTemplateSpec
Template defines the pods that will be created from this pod template. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodTemplateSpec v1 core

FieldDescription
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PodSpec
Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PodTemplateList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PodTemplate array
List of pod templates
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PodTemplate

HTTP Request

POST /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodTemplate

Response

CodeDescription
200
PodTemplate
OK
201
PodTemplate
Created
202
PodTemplate
Accepted

Patch

partially update the specified PodTemplate

HTTP Request

PATCH /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

ParameterDescription
namename of the PodTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PodTemplate
OK
201
PodTemplate
Created

Replace

replace the specified PodTemplate

HTTP Request

PUT /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

ParameterDescription
namename of the PodTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodTemplate

Response

CodeDescription
200
PodTemplate
OK
201
PodTemplate
Created

Delete

delete a PodTemplate

HTTP Request

DELETE /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

ParameterDescription
namename of the PodTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
PodTemplate
OK
202
PodTemplate
Accepted

Delete Collection

delete collection of PodTemplate

HTTP Request

DELETE /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PodTemplate

HTTP Request

GET /api/v1/namespaces/{namespace}/podtemplates/{name}

Path Parameters

ParameterDescription
namename of the PodTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PodTemplate
OK

List

list or watch objects of kind PodTemplate

HTTP Request

GET /api/v1/namespaces/{namespace}/podtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodTemplateList
OK

List All Namespaces

list or watch objects of kind PodTemplate

HTTP Request

GET /api/v1/podtemplates

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodTemplateList
OK

Watch

watch changes to an object of kind PodTemplate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/podtemplates/{name}

Path Parameters

ParameterDescription
namename of the PodTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PodTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/podtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of PodTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/podtemplates

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

PodDisruptionBudget v1 policy

GroupVersionKind
policyv1PodDisruptionBudget
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PodDisruptionBudgetSpec
Specification of the desired behavior of the PodDisruptionBudget.
status
PodDisruptionBudgetStatus
Most recently observed status of the PodDisruptionBudget.

PodDisruptionBudgetSpec v1 policy

FieldDescription
maxUnavailableAn eviction is allowed if at most "maxUnavailable" pods selected by "selector" are unavailable after the eviction, i.e. even in absence of the evicted pod. For example, one can prevent all voluntary evictions by specifying 0. This is a mutually exclusive setting with "minAvailable".
minAvailableAn eviction is allowed if at least "minAvailable" pods selected by "selector" will still be available after the eviction, i.e. even in the absence of the evicted pod. So for example you can prevent all voluntary evictions by specifying "100%".
selector
LabelSelector
patch strategy: replace
Label query over pods whose evictions are managed by the disruption budget. A null selector will match no pods, while an empty ({}) selector will select all pods within the namespace.
unhealthyPodEvictionPolicy
string
UnhealthyPodEvictionPolicy defines the criteria for when unhealthy pods should be considered for eviction. Current implementation considers healthy pods, as pods that have status.conditions item with type="Ready",status="True". Valid policies are IfHealthyBudget and AlwaysAllow. If no policy is specified, the default behavior will be used, which corresponds to the IfHealthyBudget policy. IfHealthyBudget policy means that running pods (status.phase="Running"), but not yet healthy can be evicted only if the guarded application is not disrupted (status.currentHealthy is at least equal to status.desiredHealthy). Healthy pods will be subject to the PDB for eviction. AlwaysAllow policy means that all running pods (status.phase="Running"), but not yet healthy are considered disrupted and can be evicted regardless of whether the criteria in a PDB is met. This means perspective running pods of a disrupted application might not get a chance to become healthy. Healthy pods will be subject to the PDB for eviction. Additional policies may be added in the future. Clients making eviction decisions should disallow eviction of unhealthy pods if they encounter an unrecognized policy in this field. This field is beta-level. The eviction API uses this field when the feature gate PDBUnhealthyPodEvictionPolicy is enabled (enabled by default).

PodDisruptionBudgetStatus v1 policy

FieldDescription
conditions
Condition array
patch strategy: merge
patch merge key: type
Conditions contain conditions for PDB. The disruption controller sets the DisruptionAllowed condition. The following are known values for the reason field (additional reasons could be added in the future): - SyncFailed: The controller encountered an error and wasn't able to compute the number of allowed disruptions. Therefore no disruptions are allowed and the status of the condition will be False. - InsufficientPods: The number of pods are either at or below the number required by the PodDisruptionBudget. No disruptions are allowed and the status of the condition will be False. - SufficientPods: There are more pods than required by the PodDisruptionBudget. The condition will be True, and the number of allowed disruptions are provided by the disruptionsAllowed property.
currentHealthy
integer
current number of healthy pods
desiredHealthy
integer
minimum desired number of healthy pods
disruptedPods
object
DisruptedPods contains information about pods whose eviction was processed by the API server eviction subresource handler but has not yet been observed by the PodDisruptionBudget controller. A pod will be in this map from the time when the API server processed the eviction request to the time when the pod is seen by PDB controller as having been marked for deletion (or after a timeout). The key in the map is the name of the pod and the value is the time when the API server processed the eviction request. If the deletion didn't occur and a pod is still there it will be removed from the list automatically by PodDisruptionBudget controller after some time. If everything goes smooth this map should be empty for the most of the time. Large number of entries in the map may indicate problems with pod deletions.
disruptionsAllowed
integer
Number of pod disruptions that are currently allowed.
expectedPods
integer
total number of pods counted by this disruption budget
observedGeneration
integer
Most recent generation observed when updating this PDB status. DisruptionsAllowed and other status information is valid only if observedGeneration equals to PDB's object generation.

PodDisruptionBudgetList v1 policy

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PodDisruptionBudget array
Items is a list of PodDisruptionBudgets
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PodDisruptionBudget

HTTP Request

POST /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodDisruptionBudget

Response

CodeDescription
200
PodDisruptionBudget
OK
201
PodDisruptionBudget
Created
202
PodDisruptionBudget
Accepted

Patch

partially update the specified PodDisruptionBudget

HTTP Request

PATCH /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PodDisruptionBudget
OK
201
PodDisruptionBudget
Created

Replace

replace the specified PodDisruptionBudget

HTTP Request

PUT /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodDisruptionBudget

Response

CodeDescription
200
PodDisruptionBudget
OK
201
PodDisruptionBudget
Created

Delete

delete a PodDisruptionBudget

HTTP Request

DELETE /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of PodDisruptionBudget

HTTP Request

DELETE /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PodDisruptionBudget
OK

List

list or watch objects of kind PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodDisruptionBudgetList
OK

List All Namespaces

list or watch objects of kind PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/poddisruptionbudgets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PodDisruptionBudgetList
OK

Watch

watch changes to an object of kind PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/policy/v1/watch/namespaces/{namespace}/poddisruptionbudgets/{name}

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/policy/v1/watch/namespaces/{namespace}/poddisruptionbudgets

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of PodDisruptionBudget. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/policy/v1/watch/poddisruptionbudgets

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PodDisruptionBudget

HTTP Request

PATCH /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PodDisruptionBudget
OK
201
PodDisruptionBudget
Created

Read Status

read status of the specified PodDisruptionBudget

HTTP Request

GET /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PodDisruptionBudget
OK

Replace Status

replace status of the specified PodDisruptionBudget

HTTP Request

PUT /apis/policy/v1/namespaces/{namespace}/poddisruptionbudgets/{name}/status

Path Parameters

ParameterDescription
namename of the PodDisruptionBudget
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PodDisruptionBudget

Response

CodeDescription
200
PodDisruptionBudget
OK
201
PodDisruptionBudget
Created

PriorityClass v1 scheduling.k8s.io

GroupVersionKind
scheduling.k8s.iov1PriorityClass
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
description
string
description is an arbitrary string that usually provides guidelines on when this priority class should be used.
globalDefault
boolean
globalDefault specifies whether this PriorityClass should be considered as the default priority for pods that do not have any priority class. Only one PriorityClass can be marked as `globalDefault`. However, if more than one PriorityClasses exists with their `globalDefault` field set to true, the smallest value of such global default PriorityClasses will be used as the default priority.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
preemptionPolicy
string
preemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.
value
integer
value represents the integer value of this priority class. This is the actual priority that pods receive when they have the name of this class in their pod spec.

PriorityClassList v1 scheduling

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PriorityClass array
items is the list of PriorityClasses
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PriorityClass

HTTP Request

POST /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityClass

Response

CodeDescription
200
PriorityClass
OK
201
PriorityClass
Created
202
PriorityClass
Accepted

Patch

partially update the specified PriorityClass

HTTP Request

PATCH /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

ParameterDescription
namename of the PriorityClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PriorityClass
OK
201
PriorityClass
Created

Replace

replace the specified PriorityClass

HTTP Request

PUT /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

ParameterDescription
namename of the PriorityClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityClass

Response

CodeDescription
200
PriorityClass
OK
201
PriorityClass
Created

Delete

delete a PriorityClass

HTTP Request

DELETE /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

ParameterDescription
namename of the PriorityClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of PriorityClass

HTTP Request

DELETE /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PriorityClass

HTTP Request

GET /apis/scheduling.k8s.io/v1/priorityclasses/{name}

Path Parameters

ParameterDescription
namename of the PriorityClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PriorityClass
OK

List

list or watch objects of kind PriorityClass

HTTP Request

GET /apis/scheduling.k8s.io/v1/priorityclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PriorityClassList
OK

Watch

watch changes to an object of kind PriorityClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/scheduling.k8s.io/v1/watch/priorityclasses/{name}

Path Parameters

ParameterDescription
namename of the PriorityClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PriorityClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/scheduling.k8s.io/v1/watch/priorityclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ResourceClaim v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaim
Other API versions of this object exist: v1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
spec
ResourceClaimSpec
Spec describes the desired attributes of a resource that then needs to be allocated. It can only be set once when creating the ResourceClaim.
status
ResourceClaimStatus
Status describes whether the resource is available and with which attributes.

ResourceClaimSpec v1alpha2 resource

FieldDescription
allocationMode
string
Allocation can start immediately or when a Pod wants to use the resource. "WaitForFirstConsumer" is the default.
parametersRef
ResourceClaimParametersReference
ParametersRef references a separate object with arbitrary parameters that will be used by the driver when allocating a resource for the claim. The object must be in the same namespace as the ResourceClaim.
resourceClassName
string
ResourceClassName references the driver and additional parameters via the name of a ResourceClass that was created as part of the driver deployment.

ResourceClaimStatus v1alpha2 resource

FieldDescription
allocation
AllocationResult
Allocation is set by the resource driver once a resource or set of resources has been allocated successfully. If this is not specified, the resources have not been allocated yet.
deallocationRequested
boolean
DeallocationRequested indicates that a ResourceClaim is to be deallocated. The driver then must deallocate this claim and reset the field together with clearing the Allocation field. While DeallocationRequested is set, no new consumers may be added to ReservedFor.
driverName
string
DriverName is a copy of the driver name from the ResourceClass at the time when allocation started.
reservedFor
ResourceClaimConsumerReference array
patch strategy: merge
patch merge key: uid
ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. There can be at most 32 such reservations. This may get increased in the future, but not reduced.

ResourceClaimList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClaim array
Items is the list of resource claims.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a ResourceClaim

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created
202
ResourceClaim
Accepted

Patch

partially update the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Replace

replace the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Delete

delete a ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClaim
OK
202
ResourceClaim
Accepted

Delete Collection

delete collection of ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaim
OK

List

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimList
OK

List All Namespaces

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimList
OK

Watch

watch changes to an object of kind ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Read Status

read status of the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaim
OK

Replace Status

replace status of the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

ResourceClaimParameters v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaimParameters
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
driverRequests
DriverRequests array
DriverRequests describes all resources that are needed for the allocated claim. A single claim may use resources coming from different drivers. For each driver, this array has at most one entry which then may have one or more per-driver requests. May be empty, in which case the claim can always be allocated.
generatedFrom
ResourceClaimParametersReference
If this object was created from some other resource, then this links back to that resource. This field is used to find the in-tree representation of the claim parameters when the parameter reference of the claim refers to some unknown type.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
shareable
boolean
Shareable indicates whether the allocated claim is meant to be shareable by multiple consumers at the same time.

ResourceClaimParametersList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClaimParameters array
Items is the list of node resource capacity objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create ResourceClaimParameters

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaimParameters

Response

CodeDescription
200
ResourceClaimParameters
OK
201
ResourceClaimParameters
Created
202
ResourceClaimParameters
Accepted

Patch

partially update the specified ResourceClaimParameters

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaimParameters
OK
201
ResourceClaimParameters
Created

Replace

replace the specified ResourceClaimParameters

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaimParameters

Response

CodeDescription
200
ResourceClaimParameters
OK
201
ResourceClaimParameters
Created

Delete

delete ResourceClaimParameters

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClaimParameters
OK
202
ResourceClaimParameters
Accepted

Delete Collection

delete collection of ResourceClaimParameters

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClaimParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaimParameters
OK

List

list or watch objects of kind ResourceClaimParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimParametersList
OK

List All Namespaces

list or watch objects of kind ResourceClaimParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclaimparameters

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimParametersList
OK

Watch

watch changes to an object of kind ResourceClaimParameters. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaimparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClaimParameters. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaimparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaimParameters. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclaimparameters

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ResourceSlice v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceSlice
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
driverName
string
DriverName identifies the DRA driver providing the capacity information. A field selector can be used to list only ResourceSlice objects with a certain driver name.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
namedResources
NamedResourcesResources
NamedResources describes available resources using the named resources model.
nodeName
string
NodeName identifies the node which provides the resources if they are local to a node. A field selector can be used to list only ResourceSlice objects with a certain node name.

ResourceSliceList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceSlice array
Items is the list of node resource capacity objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a ResourceSlice

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/resourceslices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceSlice

Response

CodeDescription
200
ResourceSlice
OK
201
ResourceSlice
Created
202
ResourceSlice
Accepted

Patch

partially update the specified ResourceSlice

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/resourceslices/{name}

Path Parameters

ParameterDescription
namename of the ResourceSlice

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceSlice
OK
201
ResourceSlice
Created

Replace

replace the specified ResourceSlice

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/resourceslices/{name}

Path Parameters

ParameterDescription
namename of the ResourceSlice

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceSlice

Response

CodeDescription
200
ResourceSlice
OK
201
ResourceSlice
Created

Delete

delete a ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/resourceslices/{name}

Path Parameters

ParameterDescription
namename of the ResourceSlice

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceSlice
OK
202
ResourceSlice
Accepted

Delete Collection

delete collection of ResourceSlice

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/resourceslices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceslices/{name}

Path Parameters

ParameterDescription
namename of the ResourceSlice

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceSlice
OK

List

list or watch objects of kind ResourceSlice

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceslices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceSliceList
OK

Watch

watch changes to an object of kind ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceslices/{name}

Path Parameters

ParameterDescription
namename of the ResourceSlice

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceSlice. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceslices

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ResourceClaimTemplate v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaimTemplate
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
spec
ResourceClaimTemplateSpec
Describes the ResourceClaim that is to be generated. This field is immutable. A ResourceClaim will get created by the control plane for a Pod when needed and then not get updated anymore.

ResourceClaimTemplateSpec v1alpha2 resource

FieldDescription
metadata
ObjectMeta
ObjectMeta may contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.
spec
ResourceClaimSpec
Spec for the ResourceClaim. The entire content is copied unchanged into the ResourceClaim that gets created from this template. The same fields as in a ResourceClaim are also valid here.

ResourceClaimTemplateList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClaimTemplate array
Items is the list of resource claim templates.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a ResourceClaimTemplate

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaimTemplate

Response

CodeDescription
200
ResourceClaimTemplate
OK
201
ResourceClaimTemplate
Created
202
ResourceClaimTemplate
Accepted

Patch

partially update the specified ResourceClaimTemplate

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaimTemplate
OK
201
ResourceClaimTemplate
Created

Replace

replace the specified ResourceClaimTemplate

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaimTemplate

Response

CodeDescription
200
ResourceClaimTemplate
OK
201
ResourceClaimTemplate
Created

Delete

delete a ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClaimTemplate
OK
202
ResourceClaimTemplate
Accepted

Delete Collection

delete collection of ResourceClaimTemplate

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaimTemplate
OK

List

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimTemplateList
OK

List All Namespaces

list or watch objects of kind ResourceClaimTemplate

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclaimtemplates

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimTemplateList
OK

Watch

watch changes to an object of kind ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaimtemplates/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaimTemplate
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaimtemplates

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaimTemplate. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclaimtemplates

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ResourceClass v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClass
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
driverName
string
DriverName defines the name of the dynamic resource driver that is used for allocation of a ResourceClaim that uses this class. Resource drivers have a unique name in forward domain order (acme.example.com).
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
parametersRef
ResourceClassParametersReference
ParametersRef references an arbitrary separate object that may hold parameters that will be used by the driver when allocating a resource that uses this class. A dynamic resource driver can distinguish between parameters stored here and and those stored in ResourceClaimSpec.
structuredParameters
boolean
If and only if allocation of claims using this class is handled via structured parameters, then StructuredParameters must be set to true.
suitableNodes
NodeSelector
Only nodes matching the selector will be considered by the scheduler when trying to find a Node that fits a Pod when that Pod uses a ResourceClaim that has not been allocated yet. Setting this field is optional. If null, all nodes are candidates.

ResourceClassList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClass array
Items is the list of resource classes.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a ResourceClass

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/resourceclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClass

Response

CodeDescription
200
ResourceClass
OK
201
ResourceClass
Created
202
ResourceClass
Accepted

Patch

partially update the specified ResourceClass

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/resourceclasses/{name}

Path Parameters

ParameterDescription
namename of the ResourceClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClass
OK
201
ResourceClass
Created

Replace

replace the specified ResourceClass

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/resourceclasses/{name}

Path Parameters

ParameterDescription
namename of the ResourceClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClass

Response

CodeDescription
200
ResourceClass
OK
201
ResourceClass
Created

Delete

delete a ResourceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/resourceclasses/{name}

Path Parameters

ParameterDescription
namename of the ResourceClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClass
OK
202
ResourceClass
Accepted

Delete Collection

delete collection of ResourceClass

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/resourceclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClass

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclasses/{name}

Path Parameters

ParameterDescription
namename of the ResourceClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClass
OK

List

list or watch objects of kind ResourceClass

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClassList
OK

Watch

watch changes to an object of kind ResourceClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclasses/{name}

Path Parameters

ParameterDescription
namename of the ResourceClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ResourceClassParameters v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClassParameters
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
filters
ResourceFilter array
Filters describes additional contraints that must be met when using the class.
generatedFrom
ResourceClassParametersReference
If this object was created from some other resource, then this links back to that resource. This field is used to find the in-tree representation of the class parameters when the parameter reference of the class refers to some unknown type.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
vendorParameters
VendorParameters array
VendorParameters are arbitrary setup parameters for all claims using this class. They are ignored while allocating the claim. There must not be more than one entry per driver.

ResourceClassParametersList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClassParameters array
Items is the list of node resource capacity objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create ResourceClassParameters

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClassParameters

Response

CodeDescription
200
ResourceClassParameters
OK
201
ResourceClassParameters
Created
202
ResourceClassParameters
Accepted

Patch

partially update the specified ResourceClassParameters

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClassParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClassParameters
OK
201
ResourceClassParameters
Created

Replace

replace the specified ResourceClassParameters

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClassParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClassParameters

Response

CodeDescription
200
ResourceClassParameters
OK
201
ResourceClassParameters
Created

Delete

delete ResourceClassParameters

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClassParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClassParameters
OK
202
ResourceClassParameters
Accepted

Delete Collection

delete collection of ResourceClassParameters

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClassParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClassParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClassParameters
OK

List

list or watch objects of kind ResourceClassParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclassparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClassParametersList
OK

List All Namespaces

list or watch objects of kind ResourceClassParameters

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclassparameters

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClassParametersList
OK

Watch

watch changes to an object of kind ResourceClassParameters. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclassparameters/{name}

Path Parameters

ParameterDescription
namename of the ResourceClassParameters
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClassParameters. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclassparameters

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceClassParameters. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclassparameters

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ValidatingAdmissionPolicy v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ValidatingAdmissionPolicy
Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicySpec
Specification of the desired behavior of the ValidatingAdmissionPolicy.
status
ValidatingAdmissionPolicyStatus
The status of the ValidatingAdmissionPolicy, including warnings that are useful to determine if the policy behaves in the expected way. Populated by the system. Read-only.

ValidatingAdmissionPolicySpec v1 admissionregistration

FieldDescription
auditAnnotations
AuditAnnotation array
auditAnnotations contains CEL expressions which are used to produce audit annotations for the audit event of the API request. validations and auditAnnotations may not both be empty; a least one of validations or auditAnnotations is required.
failurePolicy
string
failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.
matchConditions
MatchCondition array
patch strategy: merge
patch merge key: name
MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
matchConstraints
MatchResources
MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.
paramKind
ParamKind
ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
validations
Validation array
Validations contain CEL expressions which is used to apply the validation. Validations and AuditAnnotations may not both be empty; a minimum of one Validations or AuditAnnotations is required.
variables
Variable array
patch strategy: merge
patch merge key: name
Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.

ValidatingAdmissionPolicyStatus v1 admissionregistration

FieldDescription
conditions
Condition array
The conditions represent the latest available observations of a policy's current state.
observedGeneration
integer
The generation observed by the controller.
typeChecking
TypeChecking
The results of type checking for each expression. Presence of this field indicates the completion of the type checking.

ValidatingAdmissionPolicyList v1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicy array
List of ValidatingAdmissionPolicy.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created
202
ValidatingAdmissionPolicy
Accepted

Patch

partially update the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Replace

replace the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Delete

delete a ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

List

list or watch objects of kind ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicies

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Read Status

read status of the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

Replace Status

replace status of the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

ValidatingAdmissionPolicyBinding v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ValidatingAdmissionPolicyBinding
Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicyBindingSpec
Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.

ValidatingAdmissionPolicyBindingSpec v1 admissionregistration

FieldDescription
matchResources
MatchResources
MatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
paramRef
ParamRef
paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
policyName
string
PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.
validationActions
string array
validationActions declares how Validations of the referenced ValidatingAdmissionPolicy are enforced. If a validation evaluates to false it is always enforced according to these actions. Failures defined by the ValidatingAdmissionPolicy's FailurePolicy are enforced according to these actions only if the FailurePolicy is set to Fail, otherwise the failures are ignored. This includes compilation errors, runtime errors and misconfigurations of the policy. validationActions is declared as a set of action values. Order does not matter. validationActions may not contain duplicates of the same action. The supported actions values are: "Deny" specifies that a validation failure results in a denied request. "Warn" specifies that a validation failure is reported to the request client in HTTP Warning headers, with a warning code of 299. Warnings can be sent both for allowed or denied admission responses. "Audit" specifies that a validation failure is included in the published audit event for the request. The audit event will contain a `validation.policy.admission.k8s.io/validation_failure` audit annotation with a value containing the details of the validation failures, formatted as a JSON list of objects, each with the following fields: - message: The validation failure message string - policy: The resource name of the ValidatingAdmissionPolicy - binding: The resource name of the ValidatingAdmissionPolicyBinding - expressionIndex: The index of the failed validations in the ValidatingAdmissionPolicy - validationActions: The enforcement actions enacted for the validation failure Example audit annotation: `"validation.policy.admission.k8s.io/validation_failure": "[{"message": "Invalid value", {"policy": "policy.example.com", {"binding": "policybinding.example.com", {"expressionIndex": "1", {"validationActions": ["Audit"]}]"` Clients should expect to handle additional values by ignoring any values not recognized. "Deny" and "Warn" may not be used together since this combination needlessly duplicates the validation failure both in the API response body and the HTTP warning headers. Required.

ValidatingAdmissionPolicyBindingList v1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicyBinding array
List of PolicyBinding.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created
202
ValidatingAdmissionPolicyBinding
Accepted

Patch

partially update the specified ValidatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Replace

replace the specified ValidatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Delete

delete a ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK

List

list or watch objects of kind ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyBindingList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1/watch/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Cluster

Cluster resources are responsible for defining configuration of the cluster itself, and are generally only used by cluster operators.

APIService v1 apiregistration.k8s.io

GroupVersionKind
apiregistration.k8s.iov1APIService
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
APIServiceSpec
Spec contains information for locating and communicating with a server
status
APIServiceStatus
Status contains derived information about an API server

APIServiceSpec v1 apiregistration

FieldDescription
caBundle
string
CABundle is a PEM encoded CA bundle which will be used to validate an API server's serving certificate. If unspecified, system trust roots on the apiserver are used.
group
string
Group is the API group name this server hosts
groupPriorityMinimum
integer
GroupPriorityMinimum is the priority this group should have at least. Higher priority means that the group is preferred by clients over lower priority ones. Note that other versions of this group might specify even higher GroupPriorityMinimum values such that the whole group gets a higher priority. The primary sort is based on GroupPriorityMinimum, ordered highest number to lowest (20 before 10). The secondary sort is based on the alphabetical comparison of the name of the object. (v1.bar before v1.foo) We'd recommend something like: *.k8s.io (except extensions) at 18000 and PaaSes (OpenShift, Deis) are recommended to be in the 2000s
insecureSkipTLSVerify
boolean
InsecureSkipTLSVerify disables TLS certificate verification when communicating with this server. This is strongly discouraged. You should use the CABundle instead.
service
ServiceReference
Service is a reference to the service for this API server. It must communicate on port 443. If the Service is nil, that means the handling for the API groupversion is handled locally on this server. The call will simply delegate to the normal handler chain to be fulfilled.
version
string
Version is the API version this server hosts. For example, "v1"
versionPriority
integer
VersionPriority controls the ordering of this API version inside of its group. Must be greater than zero. The primary sort is based on VersionPriority, ordered highest to lowest (20 before 10). Since it's inside of a group, the number can be small, probably in the 10s. In case of equal version priorities, the version string will be used to compute the order inside a group. If the version string is "kube-like", it will sort above non "kube-like" version strings, which are ordered lexicographically. "Kube-like" versions start with a "v", then are followed by a number (the major version), then optionally the string "alpha" or "beta" and another number (the minor version). These are sorted first by GA > beta > alpha (where GA is a version with no suffix such as beta or alpha), and then by comparing major version, then minor version. An example sorted list of versions: v10, v2, v1, v11beta2, v10beta3, v3beta1, v12alpha1, v11alpha2, foo1, foo10.

APIServiceStatus v1 apiregistration

FieldDescription
conditions
APIServiceCondition array
patch strategy: merge
patch merge key: type
Current service state of apiService.

APIServiceList v1 apiregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
APIService array
Items is the list of APIService
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an APIService

HTTP Request

POST /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
APIService

Response

CodeDescription
200
APIService
OK
201
APIService
Created
202
APIService
Accepted

Patch

partially update the specified APIService

HTTP Request

PATCH /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
APIService
OK
201
APIService
Created

Replace

replace the specified APIService

HTTP Request

PUT /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
APIService

Response

CodeDescription
200
APIService
OK
201
APIService
Created

Delete

delete an APIService

HTTP Request

DELETE /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of APIService

HTTP Request

DELETE /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices/{name}

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
APIService
OK

List

list or watch objects of kind APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
APIServiceList
OK

Watch

watch changes to an object of kind APIService. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/apiregistration.k8s.io/v1/watch/apiservices/{name}

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of APIService. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/apiregistration.k8s.io/v1/watch/apiservices

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified APIService

HTTP Request

PATCH /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
APIService
OK
201
APIService
Created

Read Status

read status of the specified APIService

HTTP Request

GET /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
APIService
OK

Replace Status

replace status of the specified APIService

HTTP Request

PUT /apis/apiregistration.k8s.io/v1/apiservices/{name}/status

Path Parameters

ParameterDescription
namename of the APIService

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
APIService

Response

CodeDescription
200
APIService
OK
201
APIService
Created

Binding v1 core

GroupVersionKind
corev1Binding
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
target
ObjectReference
The target object that you want to bind to the standard object.

Write Operations

Create

create a Binding

HTTP Request

POST /api/v1/namespaces/{namespace}/bindings

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
Binding

Response

CodeDescription
200
Binding
OK
201
Binding
Created
202
Binding
Accepted

CertificateSigningRequest v1 certificates.k8s.io

GroupVersionKind
certificates.k8s.iov1CertificateSigningRequest
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
spec
CertificateSigningRequestSpec
spec contains the certificate request, and is immutable after creation. Only the request, signerName, expirationSeconds, and usages fields can be set on creation. Other fields are derived by Kubernetes and cannot be modified by users.
status
CertificateSigningRequestStatus
status contains information about whether the request is approved or denied, and the certificate issued by the signer, or the failure condition indicating signer failure.

CertificateSigningRequestSpec v1 certificates

FieldDescription
expirationSeconds
integer
expirationSeconds is the requested duration of validity of the issued certificate. The certificate signer may issue a certificate with a different validity duration so a client must check the delta between the notBefore and and notAfter fields in the issued certificate to determine the actual duration. The v1.22+ in-tree implementations of the well-known Kubernetes signers will honor this field as long as the requested duration is not greater than the maximum duration they will honor per the --cluster-signing-duration CLI flag to the Kubernetes controller manager. Certificate signers may not honor this field for various reasons: 1. Old signer that is unaware of the field (such as the in-tree implementations prior to v1.22) 2. Signer whose configured maximum is shorter than the requested duration 3. Signer whose configured minimum is longer than the requested duration The minimum valid value for expirationSeconds is 600, i.e. 10 minutes.
extra
object
extra contains extra attributes of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
groups
string array
groups contains group membership of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
request
string
request contains an x509 certificate signing request encoded in a "CERTIFICATE REQUEST" PEM block. When serialized as JSON or YAML, the data is additionally base64-encoded.
signerName
string
signerName indicates the requested signer, and is a qualified name. List/watch requests for CertificateSigningRequests can filter on this field using a "spec.signerName=NAME" fieldSelector. Well-known Kubernetes signers are: 1. "kubernetes.io/kube-apiserver-client": issues client certificates that can be used to authenticate to kube-apiserver. Requests for this signer are never auto-approved by kube-controller-manager, can be issued by the "csrsigning" controller in kube-controller-manager. 2. "kubernetes.io/kube-apiserver-client-kubelet": issues client certificates that kubelets use to authenticate to kube-apiserver. Requests for this signer can be auto-approved by the "csrapproving" controller in kube-controller-manager, and can be issued by the "csrsigning" controller in kube-controller-manager. 3. "kubernetes.io/kubelet-serving" issues serving certificates that kubelets use to serve TLS endpoints, which kube-apiserver can connect to securely. Requests for this signer are never auto-approved by kube-controller-manager, and can be issued by the "csrsigning" controller in kube-controller-manager. More details are available at https://k8s.io/docs/reference/access-authn-authz/certificate-signing-requests/#kubernetes-signers Custom signerNames can also be specified. The signer defines: 1. Trust distribution: how trust (CA bundles) are distributed. 2. Permitted subjects: and behavior when a disallowed subject is requested. 3. Required, permitted, or forbidden x509 extensions in the request (including whether subjectAltNames are allowed, which types, restrictions on allowed values) and behavior when a disallowed extension is requested. 4. Required, permitted, or forbidden key usages / extended key usages. 5. Expiration/certificate lifetime: whether it is fixed by the signer, configurable by the admin. 6. Whether or not requests for CA certificates are allowed.
uid
string
uid contains the uid of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.
usages
string array
usages specifies a set of key usages requested in the issued certificate. Requests for TLS client certificates typically request: "digital signature", "key encipherment", "client auth". Requests for TLS serving certificates typically request: "key encipherment", "digital signature", "server auth". Valid values are: "signing", "digital signature", "content commitment", "key encipherment", "key agreement", "data encipherment", "cert sign", "crl sign", "encipher only", "decipher only", "any", "server auth", "client auth", "code signing", "email protection", "s/mime", "ipsec end system", "ipsec tunnel", "ipsec user", "timestamping", "ocsp signing", "microsoft sgc", "netscape sgc"
username
string
username contains the name of the user that created the CertificateSigningRequest. Populated by the API server on creation and immutable.

CertificateSigningRequestStatus v1 certificates

FieldDescription
certificate
string
certificate is populated with an issued certificate by the signer after an Approved condition is present. This field is set via the /status subresource. Once populated, this field is immutable. If the certificate signing request is denied, a condition of type "Denied" is added and this field remains empty. If the signer cannot issue the certificate, a condition of type "Failed" is added and this field remains empty. Validation requirements: 1. certificate must contain one or more PEM blocks. 2. All PEM blocks must have the "CERTIFICATE" label, contain no headers, and the encoded data must be a BER-encoded ASN.1 Certificate structure as described in section 4 of RFC5280. 3. Non-PEM content may appear before or after the "CERTIFICATE" PEM blocks and is unvalidated, to allow for explanatory text as described in section 5.2 of RFC7468. If more than one PEM block is present, and the definition of the requested spec.signerName does not indicate otherwise, the first block is the issued certificate, and subsequent blocks should be treated as intermediate certificates and presented in TLS handshakes. The certificate is encoded in PEM format. When serialized as JSON or YAML, the data is additionally base64-encoded, so it consists of: base64( -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE----- )
conditions
CertificateSigningRequestCondition array
conditions applied to the request. Known conditions are "Approved", "Denied", and "Failed".

CertificateSigningRequestList v1 certificates

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
CertificateSigningRequest array
items is a collection of CertificateSigningRequest objects
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta

Write Operations

Create

create a CertificateSigningRequest

HTTP Request

POST /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CertificateSigningRequest

Response

CodeDescription
200
CertificateSigningRequest
OK
201
CertificateSigningRequest
Created
202
CertificateSigningRequest
Accepted

Patch

partially update the specified CertificateSigningRequest

HTTP Request

PATCH /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CertificateSigningRequest
OK
201
CertificateSigningRequest
Created

Replace

replace the specified CertificateSigningRequest

HTTP Request

PUT /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CertificateSigningRequest

Response

CodeDescription
200
CertificateSigningRequest
OK
201
CertificateSigningRequest
Created

Delete

delete a CertificateSigningRequest

HTTP Request

DELETE /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of CertificateSigningRequest

HTTP Request

DELETE /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CertificateSigningRequest
OK

List

list or watch objects of kind CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
CertificateSigningRequestList
OK

Watch

watch changes to an object of kind CertificateSigningRequest. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/certificates.k8s.io/v1/watch/certificatesigningrequests/{name}

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of CertificateSigningRequest. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/certificates.k8s.io/v1/watch/certificatesigningrequests

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified CertificateSigningRequest

HTTP Request

PATCH /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
CertificateSigningRequest
OK
201
CertificateSigningRequest
Created

Read Status

read status of the specified CertificateSigningRequest

HTTP Request

GET /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
CertificateSigningRequest
OK

Replace Status

replace status of the specified CertificateSigningRequest

HTTP Request

PUT /apis/certificates.k8s.io/v1/certificatesigningrequests/{name}/status

Path Parameters

ParameterDescription
namename of the CertificateSigningRequest

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
CertificateSigningRequest

Response

CodeDescription
200
CertificateSigningRequest
OK
201
CertificateSigningRequest
Created

ClusterRole v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1ClusterRole
FieldDescription
aggregationRule
AggregationRule
AggregationRule is an optional field that describes how to build the Rules for this ClusterRole. If AggregationRule is set, then the Rules are controller managed and direct changes to Rules will be stomped by the controller.
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata.
rules
PolicyRule array
Rules holds all the PolicyRules for this ClusterRole

ClusterRoleList v1 rbac

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ClusterRole array
Items is a list of ClusterRoles
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata.

Write Operations

Create

create a ClusterRole

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterRole

Response

CodeDescription
200
ClusterRole
OK
201
ClusterRole
Created
202
ClusterRole
Accepted

Patch

partially update the specified ClusterRole

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

ParameterDescription
namename of the ClusterRole

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ClusterRole
OK
201
ClusterRole
Created

Replace

replace the specified ClusterRole

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

ParameterDescription
namename of the ClusterRole

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterRole

Response

CodeDescription
200
ClusterRole
OK
201
ClusterRole
Created

Delete

delete a ClusterRole

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

ParameterDescription
namename of the ClusterRole

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ClusterRole

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ClusterRole

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterroles/{name}

Path Parameters

ParameterDescription
namename of the ClusterRole

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ClusterRole
OK

List

list or watch objects of kind ClusterRole

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterroles

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ClusterRoleList
OK

Watch

watch changes to an object of kind ClusterRole. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterroles/{name}

Path Parameters

ParameterDescription
namename of the ClusterRole

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ClusterRole. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterroles

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ClusterRoleBinding v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1ClusterRoleBinding
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata.
roleRef
RoleRef
RoleRef can only reference a ClusterRole in the global namespace. If the RoleRef cannot be resolved, the Authorizer must return an error. This field is immutable.
subjects
Subject array
Subjects holds references to the objects the role applies to.

ClusterRoleBindingList v1 rbac

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ClusterRoleBinding array
Items is a list of ClusterRoleBindings
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata.

Write Operations

Create

create a ClusterRoleBinding

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterRoleBinding

Response

CodeDescription
200
ClusterRoleBinding
OK
201
ClusterRoleBinding
Created
202
ClusterRoleBinding
Accepted

Patch

partially update the specified ClusterRoleBinding

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

ParameterDescription
namename of the ClusterRoleBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ClusterRoleBinding
OK
201
ClusterRoleBinding
Created

Replace

replace the specified ClusterRoleBinding

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

ParameterDescription
namename of the ClusterRoleBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ClusterRoleBinding

Response

CodeDescription
200
ClusterRoleBinding
OK
201
ClusterRoleBinding
Created

Delete

delete a ClusterRoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

ParameterDescription
namename of the ClusterRoleBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ClusterRoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ClusterRoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/{name}

Path Parameters

ParameterDescription
namename of the ClusterRoleBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ClusterRoleBinding
OK

List

list or watch objects of kind ClusterRoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/clusterrolebindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ClusterRoleBindingList
OK

Watch

watch changes to an object of kind ClusterRoleBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterrolebindings/{name}

Path Parameters

ParameterDescription
namename of the ClusterRoleBinding

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ClusterRoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/clusterrolebindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ComponentStatus v1 core

GroupVersionKind
corev1ComponentStatus
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
conditions
ComponentCondition array
patch strategy: merge
patch merge key: type
List of component conditions observed
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

ComponentStatusList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ComponentStatus array
List of ComponentStatus objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Read Operations

Read

read the specified ComponentStatus

HTTP Request

GET /api/v1/componentstatuses/{name}

Path Parameters

ParameterDescription
namename of the ComponentStatus

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ComponentStatus
OK

List

list objects of kind ComponentStatus

HTTP Request

GET /api/v1/componentstatuses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ComponentStatusList
OK

FlowSchema v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1FlowSchema
Other API versions of this object exist: v1beta3
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
FlowSchemaSpec
`spec` is the specification of the desired behavior of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
FlowSchemaStatus
`status` is the current status of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

FlowSchemaSpec v1 flowcontrol

FieldDescription
distinguisherMethod
FlowDistinguisherMethod
`distinguisherMethod` defines how to compute the flow distinguisher for requests that match this schema. `nil` specifies that the distinguisher is disabled and thus will always be the empty string.
matchingPrecedence
integer
`matchingPrecedence` is used to choose among the FlowSchemas that match a given request. The chosen FlowSchema is among those with the numerically lowest (which we take to be logically highest) MatchingPrecedence. Each MatchingPrecedence value must be ranged in [1,10000]. Note that if the precedence is not specified, it will be set to 1000 as default.
priorityLevelConfiguration
PriorityLevelConfigurationReference
`priorityLevelConfiguration` should reference a PriorityLevelConfiguration in the cluster. If the reference cannot be resolved, the FlowSchema will be ignored and marked as invalid in its status. Required.
rules
PolicyRulesWithSubjects array
`rules` describes which requests will match this flow schema. This FlowSchema matches a request if and only if at least one member of rules matches the request. if it is an empty slice, there will be no requests matching the FlowSchema.

FlowSchemaStatus v1 flowcontrol

FieldDescription
conditions
FlowSchemaCondition array
patch strategy: merge
patch merge key: type
`conditions` is a list of the current states of FlowSchema.

FlowSchemaList v1 flowcontrol

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
FlowSchema array
`items` is a list of FlowSchemas.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
`metadata` is the standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a FlowSchema

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created
202
FlowSchema
Accepted

Patch

partially update the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Replace

replace the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Delete

delete a FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
FlowSchema
OK

List

list or watch objects of kind FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
FlowSchemaList
OK

Watch

watch changes to an object of kind FlowSchema. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of FlowSchema. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/flowschemas

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Read Status

read status of the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
FlowSchema
OK

Replace Status

replace status of the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

IPAddress v1alpha1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1alpha1IPAddress
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
IPAddressSpec
spec is the desired state of the IPAddress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

IPAddressSpec v1alpha1 networking

FieldDescription
parentRef
ParentReference
ParentRef references the resource that an IPAddress is attached to. An IPAddress must reference a parent object.

IPAddressList v1alpha1 networking

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
IPAddress array
items is the list of IPAddresses.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create an IPAddress

HTTP Request

POST /apis/networking.k8s.io/v1alpha1/ipaddresses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
IPAddress

Response

CodeDescription
200
IPAddress
OK
201
IPAddress
Created
202
IPAddress
Accepted

Patch

partially update the specified IPAddress

HTTP Request

PATCH /apis/networking.k8s.io/v1alpha1/ipaddresses/{name}

Path Parameters

ParameterDescription
namename of the IPAddress

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
IPAddress
OK
201
IPAddress
Created

Replace

replace the specified IPAddress

HTTP Request

PUT /apis/networking.k8s.io/v1alpha1/ipaddresses/{name}

Path Parameters

ParameterDescription
namename of the IPAddress

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
IPAddress

Response

CodeDescription
200
IPAddress
OK
201
IPAddress
Created

Delete

delete an IPAddress

HTTP Request

DELETE /apis/networking.k8s.io/v1alpha1/ipaddresses/{name}

Path Parameters

ParameterDescription
namename of the IPAddress

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of IPAddress

HTTP Request

DELETE /apis/networking.k8s.io/v1alpha1/ipaddresses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified IPAddress

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/ipaddresses/{name}

Path Parameters

ParameterDescription
namename of the IPAddress

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
IPAddress
OK

List

list or watch objects of kind IPAddress

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/ipaddresses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
IPAddressList
OK

Watch

watch changes to an object of kind IPAddress. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/watch/ipaddresses/{name}

Path Parameters

ParameterDescription
namename of the IPAddress

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of IPAddress. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/watch/ipaddresses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Lease v1 coordination.k8s.io

GroupVersionKind
coordination.k8s.iov1Lease
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
LeaseSpec
spec contains the specification of the Lease. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

LeaseSpec v1 coordination

FieldDescription
acquireTime
MicroTime
acquireTime is a time when the current lease was acquired.
holderIdentity
string
holderIdentity contains the identity of the holder of a current lease.
leaseDurationSeconds
integer
leaseDurationSeconds is a duration that candidates for a lease need to wait to force acquire it. This is measure against time of last observed renewTime.
leaseTransitions
integer
leaseTransitions is the number of transitions of a lease between holders.
renewTime
MicroTime
renewTime is a time when the current holder of a lease has last updated the lease.

LeaseList v1 coordination

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Lease array
items is a list of schema objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a Lease

HTTP Request

POST /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Lease

Response

CodeDescription
200
Lease
OK
201
Lease
Created
202
Lease
Accepted

Patch

partially update the specified Lease

HTTP Request

PATCH /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

ParameterDescription
namename of the Lease
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Lease
OK
201
Lease
Created

Replace

replace the specified Lease

HTTP Request

PUT /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

ParameterDescription
namename of the Lease
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Lease

Response

CodeDescription
200
Lease
OK
201
Lease
Created

Delete

delete a Lease

HTTP Request

DELETE /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

ParameterDescription
namename of the Lease
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Lease

HTTP Request

DELETE /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases/{name}

Path Parameters

ParameterDescription
namename of the Lease
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Lease
OK

List

list or watch objects of kind Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/namespaces/{namespace}/leases

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
LeaseList
OK

List All Namespaces

list or watch objects of kind Lease

HTTP Request

GET /apis/coordination.k8s.io/v1/leases

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
LeaseList
OK

Watch

watch changes to an object of kind Lease. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/namespaces/{namespace}/leases/{name}

Path Parameters

ParameterDescription
namename of the Lease
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Lease. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/namespaces/{namespace}/leases

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Lease. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/coordination.k8s.io/v1/watch/leases

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

LocalSubjectAccessReview v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1LocalSubjectAccessReview
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
SubjectAccessReviewSpec
Spec holds information about the request being evaluated. spec.namespace must be equal to the namespace you made the request against. If empty, it is defaulted.
status
SubjectAccessReviewStatus
Status is filled in by the server and indicates whether the request is allowed or not

Write Operations

Create

create a LocalSubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/namespaces/{namespace}/localsubjectaccessreviews

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
LocalSubjectAccessReview

Response

CodeDescription
200
LocalSubjectAccessReview
OK
201
LocalSubjectAccessReview
Created
202
LocalSubjectAccessReview
Accepted

Namespace v1 core

GroupVersionKind
corev1Namespace
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
NamespaceSpec
Spec defines the behavior of the Namespace. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
NamespaceStatus
Status describes the current status of a Namespace. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

NamespaceSpec v1 core

Appears In:
FieldDescription
finalizers
string array
Finalizers is an opaque list of values that must be empty to permanently remove object from storage. More info: https://kubernetes.io/docs/tasks/administer-cluster/namespaces/

NamespaceStatus v1 core

Appears In:
FieldDescription
conditions
NamespaceCondition array
patch strategy: merge
patch merge key: type
Represents the latest available observations of a namespace's current state.
phase
string
Phase is the current lifecycle phase of the namespace. More info: https://kubernetes.io/docs/tasks/administer-cluster/namespaces/

NamespaceList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Namespace array
Items is the list of Namespace objects in the list. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Namespace

HTTP Request

POST /api/v1/namespaces

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Namespace

Response

CodeDescription
200
Namespace
OK
201
Namespace
Created
202
Namespace
Accepted

Patch

partially update the specified Namespace

HTTP Request

PATCH /api/v1/namespaces/{name}

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Namespace
OK
201
Namespace
Created

Replace

replace the specified Namespace

HTTP Request

PUT /api/v1/namespaces/{name}

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Namespace

Response

CodeDescription
200
Namespace
OK
201
Namespace
Created

Delete

delete a Namespace

HTTP Request

DELETE /api/v1/namespaces/{name}

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Read Operations

Read

read the specified Namespace

HTTP Request

GET /api/v1/namespaces/{name}

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Namespace
OK

List

list or watch objects of kind Namespace

HTTP Request

GET /api/v1/namespaces

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
NamespaceList
OK

Watch

watch changes to an object of kind Namespace. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{name}

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Namespace. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Namespace

HTTP Request

PATCH /api/v1/namespaces/{name}/status

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Namespace
OK
201
Namespace
Created

Read Status

read status of the specified Namespace

HTTP Request

GET /api/v1/namespaces/{name}/status

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Namespace
OK

Replace Status

replace status of the specified Namespace

HTTP Request

PUT /api/v1/namespaces/{name}/status

Path Parameters

ParameterDescription
namename of the Namespace

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Namespace

Response

CodeDescription
200
Namespace
OK
201
Namespace
Created

Node v1 core

GroupVersionKind
corev1Node
Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
NodeSpec
Spec defines the behavior of a node. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
NodeStatus
Most recently observed status of the node. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

NodeSpec v1 core

Appears In:
FieldDescription
configSource
NodeConfigSource
Deprecated: Previously used to specify the source of the node's configuration for the DynamicKubeletConfig feature. This feature is removed.
externalID
string
Deprecated. Not all kubelets will set this field. Remove field after 1.13. see: https://issues.k8s.io/61966
podCIDR
string
PodCIDR represents the pod IP range assigned to the node.
podCIDRs
string array
patch strategy: merge
podCIDRs represents the IP ranges assigned to the node for usage by Pods on that node. If this field is specified, the 0th entry must match the podCIDR field. It may contain at most 1 value for each of IPv4 and IPv6.
providerID
string
ID of the node assigned by the cloud provider in the format: <ProviderName>://<ProviderSpecificNodeID>
taints
Taint array
If specified, the node's taints.
unschedulable
boolean
Unschedulable controls node schedulability of new pods. By default, node is schedulable. More info: https://kubernetes.io/docs/concepts/nodes/node/#manual-node-administration

NodeStatus v1 core

Appears In:
FieldDescription
addresses
NodeAddress array
patch strategy: merge
patch merge key: type
List of addresses reachable to the node. Queried from cloud provider, if available. More info: https://kubernetes.io/docs/concepts/nodes/node/#addresses Note: This field is declared as mergeable, but the merge key is not sufficiently unique, which can cause data corruption when it is merged. Callers should instead use a full-replacement patch. See https://pr.k8s.io/79391 for an example. Consumers should assume that addresses can change during the lifetime of a Node. However, there are some exceptions where this may not be possible, such as Pods that inherit a Node's address in its own status or consumers of the downward API (status.hostIP).
allocatable
object
Allocatable represents the resources of a node that are available for scheduling. Defaults to Capacity.
capacity
object
Capacity represents the total resources of a node. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#capacity
conditions
NodeCondition array
patch strategy: merge
patch merge key: type
Conditions is an array of current observed node conditions. More info: https://kubernetes.io/docs/concepts/nodes/node/#condition
config
NodeConfigStatus
Status of the config assigned to the node via the dynamic Kubelet config feature.
daemonEndpoints
NodeDaemonEndpoints
Endpoints of daemons running on the Node.
images
ContainerImage array
List of container images on this node
nodeInfo
NodeSystemInfo
Set of ids/uuids to uniquely identify the node. More info: https://kubernetes.io/docs/concepts/nodes/node/#info
phase
string
NodePhase is the recently observed lifecycle phase of the node. More info: https://kubernetes.io/docs/concepts/nodes/node/#phase The field is never populated, and now is deprecated.
runtimeHandlers
NodeRuntimeHandler array
The available runtime handlers.
volumesAttached
AttachedVolume array
List of volumes that are attached to the node.
volumesInUse
string array
List of attachable volumes in use (mounted) by the node.

NodeList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Node array
List of nodes
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a Node

HTTP Request

POST /api/v1/nodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Node

Response

CodeDescription
200
Node
OK
201
Node
Created
202
Node
Accepted

Patch

partially update the specified Node

HTTP Request

PATCH /api/v1/nodes/{name}

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Node
OK
201
Node
Created

Replace

replace the specified Node

HTTP Request

PUT /api/v1/nodes/{name}

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Node

Response

CodeDescription
200
Node
OK
201
Node
Created

Delete

delete a Node

HTTP Request

DELETE /api/v1/nodes/{name}

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Node

HTTP Request

DELETE /api/v1/nodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Node

HTTP Request

GET /api/v1/nodes/{name}

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Node
OK

List

list or watch objects of kind Node

HTTP Request

GET /api/v1/nodes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
NodeList
OK

Watch

watch changes to an object of kind Node. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/nodes/{name}

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Node. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/nodes

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified Node

HTTP Request

PATCH /api/v1/nodes/{name}/status

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Node
OK
201
Node
Created

Read Status

read status of the specified Node

HTTP Request

GET /api/v1/nodes/{name}/status

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Node
OK

Replace Status

replace status of the specified Node

HTTP Request

PUT /api/v1/nodes/{name}/status

Path Parameters

ParameterDescription
namename of the Node

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Node

Response

CodeDescription
200
Node
OK
201
Node
Created

Proxy Operations

Create Connect Proxy

connect POST requests to proxy of Node

HTTP Request

POST /api/v1/nodes/{name}/proxy

Path Parameters

ParameterDescription
namename of the NodeProxyOptions

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Create Connect Proxy Path

connect POST requests to proxy of Node

HTTP Request

POST /api/v1/nodes/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the NodeProxyOptions
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Delete Connect Proxy

connect DELETE requests to proxy of Node

HTTP Request

DELETE /api/v1/nodes/{name}/proxy

Path Parameters

ParameterDescription
namename of the NodeProxyOptions

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Delete Connect Proxy Path

connect DELETE requests to proxy of Node

HTTP Request

DELETE /api/v1/nodes/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the NodeProxyOptions
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Get Connect Proxy

connect GET requests to proxy of Node

HTTP Request

GET /api/v1/nodes/{name}/proxy

Path Parameters

ParameterDescription
namename of the NodeProxyOptions

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Get Connect Proxy Path

connect GET requests to proxy of Node

HTTP Request

GET /api/v1/nodes/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the NodeProxyOptions
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Head Connect Proxy

connect HEAD requests to proxy of Node

HTTP Request

HEAD /api/v1/nodes/{name}/proxy

Path Parameters

ParameterDescription
namename of the NodeProxyOptions

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Head Connect Proxy Path

connect HEAD requests to proxy of Node

HTTP Request

HEAD /api/v1/nodes/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the NodeProxyOptions
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Replace Connect Proxy

connect PUT requests to proxy of Node

HTTP Request

PUT /api/v1/nodes/{name}/proxy

Path Parameters

ParameterDescription
namename of the NodeProxyOptions

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

Replace Connect Proxy Path

connect PUT requests to proxy of Node

HTTP Request

PUT /api/v1/nodes/{name}/proxy/{path}

Path Parameters

ParameterDescription
namename of the NodeProxyOptions
pathpath to the resource

Query Parameters

ParameterDescription
pathPath is the URL path to use for the current proxy request to node.

Response

CodeDescription
200
string
OK

PersistentVolume v1 core

GroupVersionKind
corev1PersistentVolume
These are assigned to Pods using PersistentVolumeClaims.
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PersistentVolumeSpec
spec defines a specification of a persistent volume owned by the cluster. Provisioned by an administrator. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistent-volumes
status
PersistentVolumeStatus
status represents the current information/status for the persistent volume. Populated by the system. Read-only. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistent-volumes

PersistentVolumeSpec v1 core

FieldDescription
accessModes
string array
accessModes contains all ways the volume can be mounted. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes
awsElasticBlockStore
AWSElasticBlockStoreVolumeSource
awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
azureDisk
AzureDiskVolumeSource
azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.
azureFile
AzureFilePersistentVolumeSource
azureFile represents an Azure File Service mount on the host and bind mount to the pod.
capacity
object
capacity is the description of the persistent volume's resources and capacity. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#capacity
cephfs
CephFSPersistentVolumeSource
cephFS represents a Ceph FS mount on the host that shares a pod's lifetime
cinder
CinderPersistentVolumeSource
cinder represents a cinder volume attached and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
claimRef
ObjectReference
claimRef is part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim. Expected to be non-nil when bound. claim.VolumeName is the authoritative bind between PV and PVC. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding
csi
CSIPersistentVolumeSource
csi represents storage that is handled by an external CSI driver (Beta feature).
fc
FCVolumeSource
fc represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod.
flexVolume
FlexPersistentVolumeSource
flexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.
flocker
FlockerVolumeSource
flocker represents a Flocker volume attached to a kubelet's host machine and exposed to the pod for its usage. This depends on the Flocker control service being running
gcePersistentDisk
GCEPersistentDiskVolumeSource
gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
glusterfs
GlusterfsPersistentVolumeSource
glusterfs represents a Glusterfs volume that is attached to a host and exposed to the pod. Provisioned by an admin. More info: https://examples.k8s.io/volumes/glusterfs/README.md
hostPath
HostPathVolumeSource
hostPath represents a directory on the host. Provisioned by a developer or tester. This is useful for single-node development and testing only! On-host storage is not supported in any way and WILL NOT WORK in a multi-node cluster. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
iscsi
ISCSIPersistentVolumeSource
iscsi represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin.
local
LocalVolumeSource
local represents directly-attached storage with node affinity
mountOptions
string array
mountOptions is the list of mount options, e.g. ["ro", "soft"]. Not validated - mount will simply fail if one is invalid. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options
nfs
NFSVolumeSource
nfs represents an NFS mount on the host. Provisioned by an admin. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
nodeAffinity
VolumeNodeAffinity
nodeAffinity defines constraints that limit what nodes this volume can be accessed from. This field influences the scheduling of pods that use this volume.
persistentVolumeReclaimPolicy
string
persistentVolumeReclaimPolicy defines what happens to a persistent volume when released from its claim. Valid options are Retain (default for manually created PersistentVolumes), Delete (default for dynamically provisioned PersistentVolumes), and Recycle (deprecated). Recycle must be supported by the volume plugin underlying this PersistentVolume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming
photonPersistentDisk
PhotonPersistentDiskVolumeSource
photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine
portworxVolume
PortworxVolumeSource
portworxVolume represents a portworx volume attached and mounted on kubelets host machine
quobyte
QuobyteVolumeSource
quobyte represents a Quobyte mount on the host that shares a pod's lifetime
rbd
RBDPersistentVolumeSource
rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. More info: https://examples.k8s.io/volumes/rbd/README.md
scaleIO
ScaleIOPersistentVolumeSource
scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes.
storageClassName
string
storageClassName is the name of StorageClass to which this persistent volume belongs. Empty value means that this volume does not belong to any StorageClass.
storageos
StorageOSPersistentVolumeSource
storageOS represents a StorageOS volume that is attached to the kubelet's host machine and mounted into the pod More info: https://examples.k8s.io/volumes/storageos/README.md
volumeAttributesClassName
string
Name of VolumeAttributesClass to which this persistent volume belongs. Empty value is not allowed. When this field is not set, it indicates that this volume does not belong to any VolumeAttributesClass. This field is mutable and can be changed by the CSI driver after a volume has been updated successfully to a new class. For an unbound PersistentVolume, the volumeAttributesClassName will be matched with unbound PersistentVolumeClaims during the binding process. This is an alpha field and requires enabling VolumeAttributesClass feature.
volumeMode
string
volumeMode defines if a volume is intended to be used with a formatted filesystem or to remain in raw block state. Value of Filesystem is implied when not included in spec.
vsphereVolume
VsphereVirtualDiskVolumeSource
vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine

PersistentVolumeStatus v1 core

FieldDescription
lastPhaseTransitionTime
Time
lastPhaseTransitionTime is the time the phase transitioned from one to another and automatically resets to current time everytime a volume phase transitions. This is a beta field and requires the PersistentVolumeLastPhaseTransitionTime feature to be enabled (enabled by default).
message
string
message is a human-readable message indicating details about why the volume is in this state.
phase
string
phase indicates if a volume is available, bound to a claim, or released by a claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#phase
reason
string
reason is a brief CamelCase string that describes any failure and is meant for machine parsing and tidy display in the CLI.

PersistentVolumeList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PersistentVolume array
items is a list of persistent volumes. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a PersistentVolume

HTTP Request

POST /api/v1/persistentvolumes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolume

Response

CodeDescription
200
PersistentVolume
OK
201
PersistentVolume
Created
202
PersistentVolume
Accepted

Patch

partially update the specified PersistentVolume

HTTP Request

PATCH /api/v1/persistentvolumes/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PersistentVolume
OK
201
PersistentVolume
Created

Replace

replace the specified PersistentVolume

HTTP Request

PUT /api/v1/persistentvolumes/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolume

Response

CodeDescription
200
PersistentVolume
OK
201
PersistentVolume
Created

Delete

delete a PersistentVolume

HTTP Request

DELETE /api/v1/persistentvolumes/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
PersistentVolume
OK
202
PersistentVolume
Accepted

Delete Collection

delete collection of PersistentVolume

HTTP Request

DELETE /api/v1/persistentvolumes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PersistentVolume
OK

List

list or watch objects of kind PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PersistentVolumeList
OK

Watch

watch changes to an object of kind PersistentVolume. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/persistentvolumes/{name}

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PersistentVolume. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/persistentvolumes

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PersistentVolume

HTTP Request

PATCH /api/v1/persistentvolumes/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PersistentVolume
OK
201
PersistentVolume
Created

Read Status

read status of the specified PersistentVolume

HTTP Request

GET /api/v1/persistentvolumes/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PersistentVolume
OK

Replace Status

replace status of the specified PersistentVolume

HTTP Request

PUT /api/v1/persistentvolumes/{name}/status

Path Parameters

ParameterDescription
namename of the PersistentVolume

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PersistentVolume

Response

CodeDescription
200
PersistentVolume
OK
201
PersistentVolume
Created

PriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1PriorityLevelConfiguration
Other API versions of this object exist: v1beta3
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PriorityLevelConfigurationSpec
`spec` is the specification of the desired behavior of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
PriorityLevelConfigurationStatus
`status` is the current status of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PriorityLevelConfigurationSpec v1 flowcontrol

FieldDescription
exempt
ExemptPriorityLevelConfiguration
`exempt` specifies how requests are handled for an exempt priority level. This field MUST be empty if `type` is `"Limited"`. This field MAY be non-empty if `type` is `"Exempt"`. If empty and `type` is `"Exempt"` then the default values for `ExemptPriorityLevelConfiguration` apply.
limited
LimitedPriorityLevelConfiguration
`limited` specifies how requests are handled for a Limited priority level. This field must be non-empty if and only if `type` is `"Limited"`.
type
string
`type` indicates whether this priority level is subject to limitation on request execution. A value of `"Exempt"` means that requests of this priority level are not subject to a limit (and thus are never queued) and do not detract from the capacity made available to other priority levels. A value of `"Limited"` means that (a) requests of this priority level _are_ subject to limits and (b) some of the server's limited capacity is made available exclusively to this priority level. Required.

PriorityLevelConfigurationStatus v1 flowcontrol

FieldDescription
conditions
PriorityLevelConfigurationCondition array
patch strategy: merge
patch merge key: type
`conditions` is the current state of "request-priority".

PriorityLevelConfigurationList v1 flowcontrol

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PriorityLevelConfiguration array
`items` is a list of request-priorities.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PriorityLevelConfiguration

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created
202
PriorityLevelConfiguration
Accepted

Patch

partially update the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Replace

replace the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Delete

delete a PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PriorityLevelConfiguration
OK

List

list or watch objects of kind PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PriorityLevelConfigurationList
OK

Watch

watch changes to an object of kind PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/watch/prioritylevelconfigurations

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Read Status

read status of the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PriorityLevelConfiguration
OK

Replace Status

replace status of the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

ResourceQuota v1 core

GroupVersionKind
corev1ResourceQuota
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
ResourceQuotaSpec
Spec defines the desired quota. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
ResourceQuotaStatus
Status defines the actual enforced quota and its current usage. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ResourceQuotaSpec v1 core

FieldDescription
hard
object
hard is the set of desired hard limits for each named resource. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
scopeSelector
ScopeSelector
scopeSelector is also a collection of filters like scopes that must match each object tracked by a quota but expressed using ScopeSelectorOperator in combination with possible values. For a resource to match, both scopes AND scopeSelector (if specified in spec), must be matched.
scopes
string array
A collection of filters that must match each object tracked by a quota. If not specified, the quota matches all objects.

ResourceQuotaStatus v1 core

FieldDescription
hard
object
Hard is the set of enforced hard limits for each named resource. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
used
object
Used is the current observed total usage of the resource in the namespace.

ResourceQuotaList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceQuota array
Items is a list of ResourceQuota objects. More info: https://kubernetes.io/docs/concepts/policy/resource-quotas/
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ResourceQuota

HTTP Request

POST /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceQuota

Response

CodeDescription
200
ResourceQuota
OK
201
ResourceQuota
Created
202
ResourceQuota
Accepted

Patch

partially update the specified ResourceQuota

HTTP Request

PATCH /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceQuota
OK
201
ResourceQuota
Created

Replace

replace the specified ResourceQuota

HTTP Request

PUT /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceQuota

Response

CodeDescription
200
ResourceQuota
OK
201
ResourceQuota
Created

Delete

delete a ResourceQuota

HTTP Request

DELETE /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceQuota
OK
202
ResourceQuota
Accepted

Delete Collection

delete collection of ResourceQuota

HTTP Request

DELETE /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceQuota
OK

List

list or watch objects of kind ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceQuotaList
OK

List All Namespaces

list or watch objects of kind ResourceQuota

HTTP Request

GET /api/v1/resourcequotas

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceQuotaList
OK

Watch

watch changes to an object of kind ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/resourcequotas/{name}

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/resourcequotas

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceQuota. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/resourcequotas

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ResourceQuota

HTTP Request

PATCH /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceQuota
OK
201
ResourceQuota
Created

Read Status

read status of the specified ResourceQuota

HTTP Request

GET /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceQuota
OK

Replace Status

replace status of the specified ResourceQuota

HTTP Request

PUT /api/v1/namespaces/{namespace}/resourcequotas/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceQuota
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceQuota

Response

CodeDescription
200
ResourceQuota
OK
201
ResourceQuota
Created

Role v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1Role
Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata.
rules
PolicyRule array
Rules holds all the PolicyRules for this Role

RoleList v1 rbac

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Role array
Items is a list of Roles
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata.

Write Operations

Create

create a Role

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Role

Response

CodeDescription
200
Role
OK
201
Role
Created
202
Role
Accepted

Patch

partially update the specified Role

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

ParameterDescription
namename of the Role
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Role
OK
201
Role
Created

Replace

replace the specified Role

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

ParameterDescription
namename of the Role
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Role

Response

CodeDescription
200
Role
OK
201
Role
Created

Delete

delete a Role

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

ParameterDescription
namename of the Role
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Role

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles/{name}

Path Parameters

ParameterDescription
namename of the Role
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Role
OK

List

list or watch objects of kind Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/roles

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
RoleList
OK

List All Namespaces

list or watch objects of kind Role

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/roles

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
RoleList
OK

Watch

watch changes to an object of kind Role. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/roles/{name}

Path Parameters

ParameterDescription
namename of the Role
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Role. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/roles

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Role. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/roles

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

RoleBinding v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1RoleBinding
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata.
roleRef
RoleRef
RoleRef can reference a Role in the current namespace or a ClusterRole in the global namespace. If the RoleRef cannot be resolved, the Authorizer must return an error. This field is immutable.
subjects
Subject array
Subjects holds references to the objects the role applies to.

RoleBindingList v1 rbac

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
RoleBinding array
Items is a list of RoleBindings
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata.

Write Operations

Create

create a RoleBinding

HTTP Request

POST /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
RoleBinding

Response

CodeDescription
200
RoleBinding
OK
201
RoleBinding
Created
202
RoleBinding
Accepted

Patch

partially update the specified RoleBinding

HTTP Request

PATCH /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

ParameterDescription
namename of the RoleBinding
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
RoleBinding
OK
201
RoleBinding
Created

Replace

replace the specified RoleBinding

HTTP Request

PUT /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

ParameterDescription
namename of the RoleBinding
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
RoleBinding

Response

CodeDescription
200
RoleBinding
OK
201
RoleBinding
Created

Delete

delete a RoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

ParameterDescription
namename of the RoleBinding
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of RoleBinding

HTTP Request

DELETE /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings/{name}

Path Parameters

ParameterDescription
namename of the RoleBinding
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
RoleBinding
OK

List

list or watch objects of kind RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/namespaces/{namespace}/rolebindings

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
RoleBindingList
OK

List All Namespaces

list or watch objects of kind RoleBinding

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/rolebindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
RoleBindingList
OK

Watch

watch changes to an object of kind RoleBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/rolebindings/{name}

Path Parameters

ParameterDescription
namename of the RoleBinding
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of RoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/namespaces/{namespace}/rolebindings

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of RoleBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/rbac.authorization.k8s.io/v1/watch/rolebindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

RuntimeClass v1 node.k8s.io

GroupVersionKind
node.k8s.iov1RuntimeClass
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
handler
string
handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration. It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The Handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
overhead
Overhead
overhead represents the resource overhead associated with running a pod for a given RuntimeClass. For more details, see https://kubernetes.io/docs/concepts/scheduling-eviction/pod-overhead/
scheduling
Scheduling
scheduling holds the scheduling constraints to ensure that pods running with this RuntimeClass are scheduled to nodes that support it. If scheduling is nil, this RuntimeClass is assumed to be supported by all nodes.

RuntimeClassList v1 node

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
RuntimeClass array
items is a list of schema objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a RuntimeClass

HTTP Request

POST /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
RuntimeClass

Response

CodeDescription
200
RuntimeClass
OK
201
RuntimeClass
Created
202
RuntimeClass
Accepted

Patch

partially update the specified RuntimeClass

HTTP Request

PATCH /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

ParameterDescription
namename of the RuntimeClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
RuntimeClass
OK
201
RuntimeClass
Created

Replace

replace the specified RuntimeClass

HTTP Request

PUT /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

ParameterDescription
namename of the RuntimeClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
RuntimeClass

Response

CodeDescription
200
RuntimeClass
OK
201
RuntimeClass
Created

Delete

delete a RuntimeClass

HTTP Request

DELETE /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

ParameterDescription
namename of the RuntimeClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of RuntimeClass

HTTP Request

DELETE /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified RuntimeClass

HTTP Request

GET /apis/node.k8s.io/v1/runtimeclasses/{name}

Path Parameters

ParameterDescription
namename of the RuntimeClass

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
RuntimeClass
OK

List

list or watch objects of kind RuntimeClass

HTTP Request

GET /apis/node.k8s.io/v1/runtimeclasses

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
RuntimeClassList
OK

Watch

watch changes to an object of kind RuntimeClass. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/node.k8s.io/v1/watch/runtimeclasses/{name}

Path Parameters

ParameterDescription
namename of the RuntimeClass

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of RuntimeClass. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/node.k8s.io/v1/watch/runtimeclasses

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

SelfSubjectAccessReview v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1SelfSubjectAccessReview
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
SelfSubjectAccessReviewSpec
Spec holds information about the request being evaluated. user and groups must be empty
status
SubjectAccessReviewStatus
Status is filled in by the server and indicates whether the request is allowed or not

SelfSubjectAccessReviewSpec v1 authorization

FieldDescription
nonResourceAttributes
NonResourceAttributes
NonResourceAttributes describes information for a non-resource access request
resourceAttributes
ResourceAttributes
ResourceAuthorizationAttributes describes information for a resource access request

Write Operations

Create

create a SelfSubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/selfsubjectaccessreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SelfSubjectAccessReview

Response

CodeDescription
200
SelfSubjectAccessReview
OK
201
SelfSubjectAccessReview
Created
202
SelfSubjectAccessReview
Accepted

SelfSubjectReview v1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1SelfSubjectReview
Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
status
SelfSubjectReviewStatus
Status is filled in by the server with the user attributes.

SelfSubjectReviewStatus v1 authentication

FieldDescription
userInfo
UserInfo
User attributes of the user making this request.

Write Operations

Create

create a SelfSubjectReview

HTTP Request

POST /apis/authentication.k8s.io/v1/selfsubjectreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SelfSubjectReview

Response

CodeDescription
200
SelfSubjectReview
OK
201
SelfSubjectReview
Created
202
SelfSubjectReview
Accepted

SelfSubjectRulesReview v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1SelfSubjectRulesReview
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
SelfSubjectRulesReviewSpec
Spec holds information about the request being evaluated.
status
SubjectRulesReviewStatus
Status is filled in by the server and indicates the set of actions a user can perform.

SelfSubjectRulesReviewSpec v1 authorization

FieldDescription
namespace
string
Namespace to evaluate rules for. Required.

Write Operations

Create

create a SelfSubjectRulesReview

HTTP Request

POST /apis/authorization.k8s.io/v1/selfsubjectrulesreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SelfSubjectRulesReview

Response

CodeDescription
200
SelfSubjectRulesReview
OK
201
SelfSubjectRulesReview
Created
202
SelfSubjectRulesReview
Accepted

ServiceAccount v1 core

GroupVersionKind
corev1ServiceAccount
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
automountServiceAccountToken
boolean
AutomountServiceAccountToken indicates whether pods running as this service account should have an API token automatically mounted. Can be overridden at the pod level.
imagePullSecrets
LocalObjectReference array
ImagePullSecrets is a list of references to secrets in the same namespace to use for pulling any images in pods that reference this ServiceAccount. ImagePullSecrets are distinct from Secrets because Secrets can be mounted in the pod, but ImagePullSecrets are only accessed by the kubelet. More info: https://kubernetes.io/docs/concepts/containers/images/#specifying-imagepullsecrets-on-a-pod
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
secrets
ObjectReference array
patch strategy: merge
patch merge key: name
Secrets is a list of the secrets in the same namespace that pods running using this ServiceAccount are allowed to use. Pods are only limited to this list if this service account has a "kubernetes.io/enforce-mountable-secrets" annotation set to "true". This field should not be used to find auto-generated service account token secrets for use outside of pods. Instead, tokens can be requested directly using the TokenRequest API, or service account token secrets can be manually created. More info: https://kubernetes.io/docs/concepts/configuration/secret

ServiceAccountList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ServiceAccount array
List of ServiceAccounts. More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ServiceAccount

HTTP Request

POST /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ServiceAccount

Response

CodeDescription
200
ServiceAccount
OK
201
ServiceAccount
Created
202
ServiceAccount
Accepted

Patch

partially update the specified ServiceAccount

HTTP Request

PATCH /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

ParameterDescription
namename of the ServiceAccount
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ServiceAccount
OK
201
ServiceAccount
Created

Replace

replace the specified ServiceAccount

HTTP Request

PUT /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

ParameterDescription
namename of the ServiceAccount
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ServiceAccount

Response

CodeDescription
200
ServiceAccount
OK
201
ServiceAccount
Created

Delete

delete a ServiceAccount

HTTP Request

DELETE /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

ParameterDescription
namename of the ServiceAccount
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ServiceAccount
OK
202
ServiceAccount
Accepted

Delete Collection

delete collection of ServiceAccount

HTTP Request

DELETE /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ServiceAccount

HTTP Request

GET /api/v1/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

ParameterDescription
namename of the ServiceAccount
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ServiceAccount
OK

List

list or watch objects of kind ServiceAccount

HTTP Request

GET /api/v1/namespaces/{namespace}/serviceaccounts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ServiceAccountList
OK

List All Namespaces

list or watch objects of kind ServiceAccount

HTTP Request

GET /api/v1/serviceaccounts

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ServiceAccountList
OK

Watch

watch changes to an object of kind ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/serviceaccounts/{name}

Path Parameters

ParameterDescription
namename of the ServiceAccount
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/serviceaccounts

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ServiceAccount. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/serviceaccounts

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ServiceCIDR v1alpha1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1alpha1ServiceCIDR
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
ServiceCIDRSpec
spec is the desired state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
ServiceCIDRStatus
status represents the current state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

ServiceCIDRSpec v1alpha1 networking

FieldDescription
cidrs
string array
CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.

ServiceCIDRStatus v1alpha1 networking

FieldDescription
conditions
Condition array
patch strategy: merge
patch merge key: type
conditions holds an array of metav1.Condition that describe the state of the ServiceCIDR. Current service state

ServiceCIDRList v1alpha1 networking

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ServiceCIDR array
items is the list of ServiceCIDRs.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a ServiceCIDR

HTTP Request

POST /apis/networking.k8s.io/v1alpha1/servicecidrs

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ServiceCIDR

Response

CodeDescription
200
ServiceCIDR
OK
201
ServiceCIDR
Created
202
ServiceCIDR
Accepted

Patch

partially update the specified ServiceCIDR

HTTP Request

PATCH /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ServiceCIDR
OK
201
ServiceCIDR
Created

Replace

replace the specified ServiceCIDR

HTTP Request

PUT /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ServiceCIDR

Response

CodeDescription
200
ServiceCIDR
OK
201
ServiceCIDR
Created

Delete

delete a ServiceCIDR

HTTP Request

DELETE /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ServiceCIDR

HTTP Request

DELETE /apis/networking.k8s.io/v1alpha1/servicecidrs

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ServiceCIDR
OK

List

list or watch objects of kind ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/servicecidrs

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ServiceCIDRList
OK

Watch

watch changes to an object of kind ServiceCIDR. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/watch/servicecidrs/{name}

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ServiceCIDR. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/watch/servicecidrs

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ServiceCIDR

HTTP Request

PATCH /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}/status

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ServiceCIDR
OK
201
ServiceCIDR
Created

Read Status

read status of the specified ServiceCIDR

HTTP Request

GET /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}/status

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ServiceCIDR
OK

Replace Status

replace status of the specified ServiceCIDR

HTTP Request

PUT /apis/networking.k8s.io/v1alpha1/servicecidrs/{name}/status

Path Parameters

ParameterDescription
namename of the ServiceCIDR

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ServiceCIDR

Response

CodeDescription
200
ServiceCIDR
OK
201
ServiceCIDR
Created

StorageVersion v1alpha1 internal.apiserver.k8s.io

GroupVersionKind
internal.apiserver.k8s.iov1alpha1StorageVersion
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
The name is <group>.<resource>.
spec
StorageVersionSpec
Spec is an empty spec. It is here to comply with Kubernetes API style.
status
StorageVersionStatus
API server instances report the version they can decode and the version they encode objects to when persisting objects in the backend.

StorageVersionSpec v1alpha1 apiserverinternal

FieldDescription

StorageVersionStatus v1alpha1 apiserverinternal

FieldDescription
commonEncodingVersion
string
If all API server instances agree on the same encoding storage version, then this field is set to that version. Otherwise this field is left empty. API servers should finish updating its storageVersionStatus entry before serving write operations, so that this field will be in sync with the reality.
conditions
StorageVersionCondition array
The latest available observations of the storageVersion's state.
storageVersions
ServerStorageVersion array
The reported versions per API server instance.

StorageVersionList v1alpha1 apiserverinternal

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
StorageVersion array
Items holds a list of StorageVersion
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageVersion

HTTP Request

POST /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersion

Response

CodeDescription
200
StorageVersion
OK
201
StorageVersion
Created
202
StorageVersion
Accepted

Patch

partially update the specified StorageVersion

HTTP Request

PATCH /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StorageVersion
OK
201
StorageVersion
Created

Replace

replace the specified StorageVersion

HTTP Request

PUT /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersion

Response

CodeDescription
200
StorageVersion
OK
201
StorageVersion
Created

Delete

delete a StorageVersion

HTTP Request

DELETE /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of StorageVersion

HTTP Request

DELETE /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StorageVersion
OK

List

list or watch objects of kind StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
StorageVersionList
OK

Watch

watch changes to an object of kind StorageVersion. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/watch/storageversions/{name}

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of StorageVersion. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/watch/storageversions

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified StorageVersion

HTTP Request

PATCH /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StorageVersion
OK
201
StorageVersion
Created

Read Status

read status of the specified StorageVersion

HTTP Request

GET /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StorageVersion
OK

Replace Status

replace status of the specified StorageVersion

HTTP Request

PUT /apis/internal.apiserver.k8s.io/v1alpha1/storageversions/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersion

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersion

Response

CodeDescription
200
StorageVersion
OK
201
StorageVersion
Created

StorageVersionMigration v1alpha1 storagemigration.k8s.io

GroupVersionKind
storagemigration.k8s.iov1alpha1StorageVersionMigration
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
StorageVersionMigrationSpec
Specification of the migration.
status
StorageVersionMigrationStatus
Status of the migration.

StorageVersionMigrationSpec v1alpha1 storagemigration

FieldDescription
continueToken
string
The token used in the list options to get the next chunk of objects to migrate. When the .status.conditions indicates the migration is "Running", users can use this token to check the progress of the migration.
resource
GroupVersionResource
The resource that is being migrated. The migrator sends requests to the endpoint serving the resource. Immutable.

StorageVersionMigrationStatus v1alpha1 storagemigration

FieldDescription
conditions
MigrationCondition array
patch strategy: merge
patch merge key: type
The latest available observations of the migration's current state.
resourceVersion
string
ResourceVersion to compare with the GC cache for performing the migration. This is the current resource version of given group, version and resource when kube-controller-manager first observes this StorageVersionMigration resource.

StorageVersionMigrationList v1alpha1 storagemigration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
StorageVersionMigration array
patch strategy: merge
patch merge key: type
Items is the list of StorageVersionMigration
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a StorageVersionMigration

HTTP Request

POST /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersionMigration

Response

CodeDescription
200
StorageVersionMigration
OK
201
StorageVersionMigration
Created
202
StorageVersionMigration
Accepted

Patch

partially update the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StorageVersionMigration
OK
201
StorageVersionMigration
Created

Replace

replace the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersionMigration

Response

CodeDescription
200
StorageVersionMigration
OK
201
StorageVersionMigration
Created

Delete

delete a StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of StorageVersionMigration

HTTP Request

DELETE /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StorageVersionMigration
OK

List

list or watch objects of kind StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
StorageVersionMigrationList
OK

Watch

watch changes to an object of kind StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations/{name}

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of StorageVersionMigration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/watch/storageversionmigrations

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified StorageVersionMigration

HTTP Request

PATCH /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
StorageVersionMigration
OK
201
StorageVersionMigration
Created

Read Status

read status of the specified StorageVersionMigration

HTTP Request

GET /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
StorageVersionMigration
OK

Replace Status

replace status of the specified StorageVersionMigration

HTTP Request

PUT /apis/storagemigration.k8s.io/v1alpha1/storageversionmigrations/{name}/status

Path Parameters

ParameterDescription
namename of the StorageVersionMigration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
StorageVersionMigration

Response

CodeDescription
200
StorageVersionMigration
OK
201
StorageVersionMigration
Created

SubjectAccessReview v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1SubjectAccessReview
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
SubjectAccessReviewSpec
Spec holds information about the request being evaluated
status
SubjectAccessReviewStatus
Status is filled in by the server and indicates whether the request is allowed or not

SubjectAccessReviewSpec v1 authorization

FieldDescription
extra
object
Extra corresponds to the user.Info.GetExtra() method from the authenticator. Since that is input to the authorizer it needs a reflection here.
groups
string array
Groups is the groups you're testing for.
nonResourceAttributes
NonResourceAttributes
NonResourceAttributes describes information for a non-resource access request
resourceAttributes
ResourceAttributes
ResourceAuthorizationAttributes describes information for a resource access request
uid
string
UID information about the requesting user.
user
string
User is the user you're testing for. If you specify "User" but not "Groups", then is it interpreted as "What if User were not a member of any groups

SubjectAccessReviewStatus v1 authorization

FieldDescription
allowed
boolean
Allowed is required. True if the action would be allowed, false otherwise.
denied
boolean
Denied is optional. True if the action would be denied, otherwise false. If both allowed is false and denied is false, then the authorizer has no opinion on whether to authorize the action. Denied may not be true if Allowed is true.
evaluationError
string
EvaluationError is an indication that some error occurred during the authorization check. It is entirely possible to get an error and be able to continue determine authorization status in spite of it. For instance, RBAC can be missing a role, but enough roles are still present and bound to reason about the request.
reason
string
Reason is optional. It indicates why a request was allowed or denied.

Write Operations

Create

create a SubjectAccessReview

HTTP Request

POST /apis/authorization.k8s.io/v1/subjectaccessreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SubjectAccessReview

Response

CodeDescription
200
SubjectAccessReview
OK
201
SubjectAccessReview
Created
202
SubjectAccessReview
Accepted

TokenRequest v1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1TokenRequest
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
TokenRequestSpec
Spec holds information about the request being evaluated
status
TokenRequestStatus
Status is filled in by the server and indicates whether the token can be authenticated.

TokenRequestSpec v1 authentication

FieldDescription
audiences
string array
Audiences are the intendend audiences of the token. A recipient of a token must identify themself with an identifier in the list of audiences of the token, and otherwise should reject the token. A token issued for multiple audiences may be used to authenticate against any of the audiences listed but implies a high degree of trust between the target audiences.
boundObjectRef
BoundObjectReference
BoundObjectRef is a reference to an object that the token will be bound to. The token will only be valid for as long as the bound object exists. NOTE: The API server's TokenReview endpoint will validate the BoundObjectRef, but other audiences may not. Keep ExpirationSeconds small if you want prompt revocation.
expirationSeconds
integer
ExpirationSeconds is the requested duration of validity of the request. The token issuer may return a token with a different validity duration so a client needs to check the 'expiration' field in a response.

TokenRequestStatus v1 authentication

FieldDescription
expirationTimestamp
Time
ExpirationTimestamp is the time of expiration of the returned token.
token
string
Token is the opaque bearer token.

TokenReview v1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1TokenReview
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
TokenReviewSpec
Spec holds information about the request being evaluated
status
TokenReviewStatus
Status is filled in by the server and indicates whether the request can be authenticated.

TokenReviewSpec v1 authentication

FieldDescription
audiences
string array
Audiences is a list of the identifiers that the resource server presented with the token identifies as. Audience-aware token authenticators will verify that the token was intended for at least one of the audiences in this list. If no audiences are provided, the audience will default to the audience of the Kubernetes apiserver.
token
string
Token is the opaque bearer token.

TokenReviewStatus v1 authentication

FieldDescription
audiences
string array
Audiences are audience identifiers chosen by the authenticator that are compatible with both the TokenReview and token. An identifier is any identifier in the intersection of the TokenReviewSpec audiences and the token's audiences. A client of the TokenReview API that sets the spec.audiences field should validate that a compatible audience identifier is returned in the status.audiences field to ensure that the TokenReview server is audience aware. If a TokenReview returns an empty status.audience field where status.authenticated is "true", the token is valid against the audience of the Kubernetes API server.
authenticated
boolean
Authenticated indicates that the token was associated with a known user.
error
string
Error indicates that the token couldn't be checked
user
UserInfo
User is the UserInfo associated with the provided token.

Write Operations

Create

create a TokenReview

HTTP Request

POST /apis/authentication.k8s.io/v1/tokenreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
TokenReview

Response

CodeDescription
200
TokenReview
OK
201
TokenReview
Created
202
TokenReview
Accepted

NetworkPolicy v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1NetworkPolicy
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
NetworkPolicySpec
spec represents the specification of the desired behavior for this NetworkPolicy.

NetworkPolicySpec v1 networking

FieldDescription
egress
NetworkPolicyEgressRule array
egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
ingress
NetworkPolicyIngressRule array
ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
podSelector
LabelSelector
podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
policyTypes
string array
policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8

NetworkPolicyList v1 networking

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
NetworkPolicy array
items is a list of schema objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a NetworkPolicy

HTTP Request

POST /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
NetworkPolicy

Response

CodeDescription
200
NetworkPolicy
OK
201
NetworkPolicy
Created
202
NetworkPolicy
Accepted

Patch

partially update the specified NetworkPolicy

HTTP Request

PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

ParameterDescription
namename of the NetworkPolicy
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
NetworkPolicy
OK
201
NetworkPolicy
Created

Replace

replace the specified NetworkPolicy

HTTP Request

PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

ParameterDescription
namename of the NetworkPolicy
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
NetworkPolicy

Response

CodeDescription
200
NetworkPolicy
OK
201
NetworkPolicy
Created

Delete

delete a NetworkPolicy

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

ParameterDescription
namename of the NetworkPolicy
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of NetworkPolicy

HTTP Request

DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

ParameterDescription
namename of the NetworkPolicy
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
NetworkPolicy
OK

List

list or watch objects of kind NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/namespaces/{namespace}/networkpolicies

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
NetworkPolicyList
OK

List All Namespaces

list or watch objects of kind NetworkPolicy

HTTP Request

GET /apis/networking.k8s.io/v1/networkpolicies

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
NetworkPolicyList
OK

Watch

watch changes to an object of kind NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/networkpolicies/{name}

Path Parameters

ParameterDescription
namename of the NetworkPolicy
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/namespaces/{namespace}/networkpolicies

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of NetworkPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/networking.k8s.io/v1/watch/networkpolicies

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Definitions

This section contains definitions for objects used in the Kubernetes APIs.

APIGroup v1 meta

GroupVersionKind
metav1APIGroup

APIGroup contains the name, the supported versions, and the preferred version of a group.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
name is the name of the group.
preferredVersion
GroupVersionForDiscovery
preferredVersion is the version preferred by the API server, which probably is the storage version.
serverAddressByClientCIDRs
ServerAddressByClientCIDR array
a map of client CIDR to server address that is serving this group. This is to help clients reach servers in the most network-efficient way possible. Clients can use the appropriate server address as per the CIDR that they match. In case of multiple matches, clients should use the longest matching CIDR. The server returns only those CIDRs that it thinks that the client can match. For example: the master will return an internal IP CIDR only, if the client reaches the server using an internal IP. Server looks at X-Forwarded-For header or X-Real-Ip header or request.RemoteAddr (in that order) to get the client IP.
versions
GroupVersionForDiscovery array
versions are the versions supported in this group.

APIResource v1 meta

GroupVersionKind
metav1APIResource

APIResource specifies the name of a resource and whether it is namespaced.

FieldDescription
categories
string array
categories is a list of the grouped resources this resource belongs to (e.g. 'all')
group
string
group is the preferred group of the resource. Empty implies the group of the containing resource list. For subresources, this may have a different value, for example: Scale".
kind
string
kind is the kind for the resource (e.g. 'Foo' is the kind for a resource 'foo')
name
string
name is the plural name of the resource.
namespaced
boolean
namespaced indicates if a resource is namespaced or not.
shortNames
string array
shortNames is a list of suggested short names of the resource.
singularName
string
singularName is the singular name of the resource. This allows clients to handle plural and singular opaquely. The singularName is more correct for reporting status on a single item and both singular and plural are allowed from the kubectl CLI interface.
storageVersionHash
string
The hash value of the storage version, the version this resource is converted to when written to the data store. Value must be treated as opaque by clients. Only equality comparison on the value is valid. This is an alpha feature and may change or be removed in the future. The field is populated by the apiserver only if the StorageVersionHash feature gate is enabled. This field will remain optional even if it graduates.
verbs
string array
verbs is a list of supported kube verbs (this includes get, list, watch, create, update, patch, delete, deletecollection, and proxy)
version
string
version is the preferred version of the resource. Empty implies the version of the containing resource list For subresources, this may have a different value, for example: v1 (while inside a v1beta1 version of the core resource's group)".

APIServiceCondition v1 apiregistration.k8s.io

GroupVersionKind
apiregistration.k8s.iov1APIServiceCondition

APIServiceCondition describes the state of an APIService at a particular point

FieldDescription
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
message
string
Human-readable message indicating details about last transition.
reason
string
Unique, one-word, CamelCase reason for the condition's last transition.
status
string
Status is the status of the condition. Can be True, False, Unknown.
type
string
Type is the type of the condition.

APIVersions v1 meta

GroupVersionKind
metav1APIVersions

APIVersions lists the versions that are available, to allow clients to discover the API at /api, which is the root path of the legacy v1 API.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
serverAddressByClientCIDRs
ServerAddressByClientCIDR array
a map of client CIDR to server address that is serving this group. This is to help clients reach servers in the most network-efficient way possible. Clients can use the appropriate server address as per the CIDR that they match. In case of multiple matches, clients should use the longest matching CIDR. The server returns only those CIDRs that it thinks that the client can match. For example: the master will return an internal IP CIDR only, if the client reaches the server using an internal IP. Server looks at X-Forwarded-For header or X-Real-Ip header or request.RemoteAddr (in that order) to get the client IP.
versions
string array
versions are the api versions that are available.

AWSElasticBlockStoreVolumeSource v1 core

GroupVersionKind
corev1AWSElasticBlockStoreVolumeSource

Represents a Persistent Disk resource in AWS. An AWS EBS disk must exist before mounting to a container. The disk must also be in the same AWS zone as the kubelet. An AWS EBS disk can only be mounted as read/write once. AWS EBS volumes support ownership management and SELinux relabeling.

FieldDescription
fsType
string
fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
partition
integer
partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).
readOnly
boolean
readOnly value true will force the readOnly setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
volumeID
string
volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

Affinity v1 core

GroupVersionKind
corev1Affinity

Affinity is a group of affinity scheduling rules.

Appears In:
FieldDescription
nodeAffinity
NodeAffinity
Describes node affinity scheduling rules for the pod.
podAffinity
PodAffinity
Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).
podAntiAffinity
PodAntiAffinity
Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

AggregationRule v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1AggregationRule

AggregationRule describes how to locate ClusterRoles to aggregate into the ClusterRole

Appears In:
FieldDescription
clusterRoleSelectors
LabelSelector array
ClusterRoleSelectors holds a list of selectors which will be used to find ClusterRoles and create the rules. If any of the selectors match, then the ClusterRole's permissions will be added

AllocationResult v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2AllocationResult

AllocationResult contains attributes of an allocated resource.

FieldDescription
availableOnNodes
NodeSelector
This field will get set by the resource driver after it has allocated the resource to inform the scheduler where it can schedule Pods using the ResourceClaim. Setting this field is optional. If null, the resource is available everywhere.
resourceHandles
ResourceHandle array
ResourceHandles contain the state associated with an allocation that should be maintained throughout the lifetime of a claim. Each ResourceHandle contains data that should be passed to a specific kubelet plugin once it lands on a node. This data is returned by the driver after a successful allocation and is opaque to Kubernetes. Driver documentation may explain to users how to interpret this data if needed. Setting this field is optional. It has a maximum size of 32 entries. If null (or empty), it is assumed this allocation will be processed by a single kubelet plugin with no ResourceHandle data attached. The name of the kubelet plugin invoked will match the DriverName set in the ResourceClaimStatus this AllocationResult is embedded in.
shareable
boolean
Shareable determines whether the resource supports more than one consumer at a time.

AppArmorProfile v1 core

GroupVersionKind
corev1AppArmorProfile

AppArmorProfile defines a pod or container's AppArmor settings.

FieldDescription
localhostProfile
string
localhostProfile indicates a profile loaded on the node that should be used. The profile must be preconfigured on the node to work. Must match the loaded name of the profile. Must be set if and only if type is "Localhost".
type
string
type indicates which kind of AppArmor profile will be applied. Valid options are: Localhost - a profile pre-loaded on the node. RuntimeDefault - the container runtime's default profile. Unconfined - no AppArmor enforcement.

AttachedVolume v1 core

GroupVersionKind
corev1AttachedVolume

AttachedVolume describes a volume attached to a node

Appears In:
FieldDescription
devicePath
string
DevicePath represents the device path where the volume should be available
name
string
Name of the attached volume

AuditAnnotation v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1AuditAnnotation

AuditAnnotation describes how to produce an audit annotation for an API request.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
key
string
key specifies the audit annotation key. The audit annotation keys of a ValidatingAdmissionPolicy must be unique. The key must be a qualified name ([A-Za-z0-9][-A-Za-z0-9_.]*) no more than 63 bytes in length. The key is combined with the resource name of the ValidatingAdmissionPolicy to construct an audit annotation key: "{ValidatingAdmissionPolicy name}/{key}". If an admission webhook uses the same resource name as this ValidatingAdmissionPolicy and the same audit annotation key, the annotation key will be identical. In this case, the first annotation written with the key will be included in the audit event and all subsequent annotations with the same key will be discarded. Required.
valueExpression
string
valueExpression represents the expression which is evaluated by CEL to produce an audit annotation value. The expression must evaluate to either a string or null value. If the expression evaluates to a string, the audit annotation is included with the string value. If the expression evaluates to null or empty string the audit annotation will be omitted. The valueExpression may be no longer than 5kb in length. If the result of the valueExpression is more than 10kb in length, it will be truncated to 10kb. If multiple ValidatingAdmissionPolicyBinding resources match an API request, then the valueExpression will be evaluated for each binding. All unique values produced by the valueExpressions will be joined together in a comma-separated list. Required.

AzureDiskVolumeSource v1 core

GroupVersionKind
corev1AzureDiskVolumeSource

AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

FieldDescription
cachingMode
string
cachingMode is the Host Caching mode: None, Read Only, Read Write.
diskName
string
diskName is the Name of the data disk in the blob storage
diskURI
string
diskURI is the URI of data disk in the blob storage
fsType
string
fsType is Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
kind
string
kind expected values are Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set). defaults to shared
readOnly
boolean
readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

AzureFilePersistentVolumeSource v1 core

GroupVersionKind
corev1AzureFilePersistentVolumeSource

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

FieldDescription
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretName
string
secretName is the name of secret that contains Azure Storage Account Name and Key
secretNamespace
string
secretNamespace is the namespace of the secret that contains Azure Storage Account Name and Key default is the same as the Pod
shareName
string
shareName is the azure Share Name

AzureFileVolumeSource v1 core

GroupVersionKind
corev1AzureFileVolumeSource

AzureFile represents an Azure File Service mount on the host and bind mount to the pod.

Appears In:
FieldDescription
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretName
string
secretName is the name of secret that contains Azure Storage Account Name and Key
shareName
string
shareName is the azure share Name

BoundObjectReference v1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1BoundObjectReference

BoundObjectReference is a reference to an object that a token is bound to.

FieldDescription
apiVersion
string
API version of the referent.
kind
string
Kind of the referent. Valid kinds are 'Pod' and 'Secret'.
name
string
Name of the referent.
uid
string
UID of the referent.

CSINodeDriver v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1CSINodeDriver

CSINodeDriver holds information about the specification of one CSI driver installed on a node

FieldDescription
allocatable
VolumeNodeResources
allocatable represents the volume resources of a node that are available for scheduling. This field is beta.
name
string
name represents the name of the CSI driver that this object refers to. This MUST be the same name returned by the CSI GetPluginName() call for that driver.
nodeID
string
nodeID of the node from the driver point of view. This field enables Kubernetes to communicate with storage systems that do not share the same nomenclature for nodes. For example, Kubernetes may refer to a given node as "node1", but the storage system may refer to the same node as "nodeA". When Kubernetes issues a command to the storage system to attach a volume to a specific node, it can use this field to refer to the node name using the ID that the storage system will understand, e.g. "nodeA" instead of "node1". This field is required.
topologyKeys
string array
topologyKeys is the list of keys supported by the driver. When a driver is initialized on a cluster, it provides a set of topology keys that it understands (e.g. "company.com/zone", "company.com/region"). When a driver is initialized on a node, it provides the same topology keys along with values. Kubelet will expose these topology keys as labels on its own node object. When Kubernetes does topology aware provisioning, it can use this list to determine which labels it should retrieve from the node object and pass back to the driver. It is possible for different nodes to use different topology keys. This can be empty if driver does not support topology.

CSIPersistentVolumeSource v1 core

GroupVersionKind
corev1CSIPersistentVolumeSource

Represents storage that is managed by an external CSI volume driver (Beta feature)

FieldDescription
controllerExpandSecretRef
SecretReference
controllerExpandSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerExpandVolume call. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
controllerPublishSecretRef
SecretReference
controllerPublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerPublishVolume and ControllerUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
driver
string
driver is the name of the driver to use for this volume. Required.
fsType
string
fsType to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs".
nodeExpandSecretRef
SecretReference
nodeExpandSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeExpandVolume call. This field is optional, may be omitted if no secret is required. If the secret object contains more than one secret, all secrets are passed.
nodePublishSecretRef
SecretReference
nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
nodeStageSecretRef
SecretReference
nodeStageSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeStageVolume and NodeStageVolume and NodeUnstageVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.
readOnly
boolean
readOnly value to pass to ControllerPublishVolumeRequest. Defaults to false (read/write).
volumeAttributes
object
volumeAttributes of the volume to publish.
volumeHandle
string
volumeHandle is the unique volume name returned by the CSI volume plugin’s CreateVolume to refer to the volume on all subsequent calls. Required.

CSIVolumeSource v1 core

GroupVersionKind
corev1CSIVolumeSource

Represents a source location of a volume to mount, managed by an external CSI driver

Appears In:
FieldDescription
driver
string
driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster.
fsType
string
fsType to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply.
nodePublishSecretRef
LocalObjectReference
nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secret references are passed.
readOnly
boolean
readOnly specifies a read-only configuration for the volume. Defaults to false (read/write).
volumeAttributes
object
volumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver's documentation for supported values.

Capabilities v1 core

GroupVersionKind
corev1Capabilities

Adds and removes POSIX capabilities from running containers.

FieldDescription
add
string array
Added capabilities
drop
string array
Removed capabilities

CephFSPersistentVolumeSource v1 core

GroupVersionKind
corev1CephFSPersistentVolumeSource

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

FieldDescription
monitors
string array
monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
path
string
path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /
readOnly
boolean
readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
secretFile
string
secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
secretRef
SecretReference
secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
user
string
user is Optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

CephFSVolumeSource v1 core

GroupVersionKind
corev1CephFSVolumeSource

Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.

Appears In:
FieldDescription
monitors
string array
monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
path
string
path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /
readOnly
boolean
readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
secretFile
string
secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
secretRef
LocalObjectReference
secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it
user
string
user is optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

CertificateSigningRequestCondition v1 certificates.k8s.io

GroupVersionKind
certificates.k8s.iov1CertificateSigningRequestCondition

CertificateSigningRequestCondition describes a condition of a CertificateSigningRequest object

FieldDescription
lastTransitionTime
Time
lastTransitionTime is the time the condition last transitioned from one status to another. If unset, when a new condition type is added or an existing condition's status is changed, the server defaults this to the current time.
lastUpdateTime
Time
lastUpdateTime is the time of the last update to this condition
message
string
message contains a human readable message with details about the request state
reason
string
reason indicates a brief reason for the request state
status
string
status of the condition, one of True, False, Unknown. Approved, Denied, and Failed conditions may not be "False" or "Unknown".
type
string
type of the condition. Known conditions are "Approved", "Denied", and "Failed". An "Approved" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer. A "Denied" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer. A "Failed" condition is added via the /status subresource, indicating the signer failed to issue the certificate. Approved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added. Only one condition of a given type is allowed.

CinderPersistentVolumeSource v1 core

GroupVersionKind
corev1CinderPersistentVolumeSource

Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.

FieldDescription
fsType
string
fsType Filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
readOnly
boolean
readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
secretRef
SecretReference
secretRef is Optional: points to a secret object containing parameters used to connect to OpenStack.
volumeID
string
volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

CinderVolumeSource v1 core

GroupVersionKind
corev1CinderVolumeSource

Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md
secretRef
LocalObjectReference
secretRef is optional: points to a secret object containing parameters used to connect to OpenStack.
volumeID
string
volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

ClaimSource v1 core

GroupVersionKind
corev1ClaimSource

ClaimSource describes a reference to a ResourceClaim. Exactly one of these fields should be set. Consumers of this type must treat an empty object as if it has an unknown value.

FieldDescription
resourceClaimName
string
ResourceClaimName is the name of a ResourceClaim object in the same namespace as this pod.
resourceClaimTemplateName
string
ResourceClaimTemplateName is the name of a ResourceClaimTemplate object in the same namespace as this pod. The template will be used to create a new ResourceClaim, which will be bound to this pod. When this pod is deleted, the ResourceClaim will also be deleted. The pod name and resource name, along with a generated component, will be used to form a unique name for the ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. This field is immutable and no changes will be made to the corresponding ResourceClaim by the control plane after creating the ResourceClaim.

ClientIPConfig v1 core

GroupVersionKind
corev1ClientIPConfig

ClientIPConfig represents the configurations of Client IP based session affinity.

FieldDescription
timeoutSeconds
integer
timeoutSeconds specifies the seconds of ClientIP type session sticky time. The value must be >0 && <=86400(for 1 day) if ServiceAffinity == "ClientIP". Default value is 10800(for 3 hours).

ClusterTrustBundleProjection v1 core

GroupVersionKind
corev1ClusterTrustBundleProjection

ClusterTrustBundleProjection describes how to select a set of ClusterTrustBundle objects and project their contents into the pod filesystem.

FieldDescription
labelSelector
LabelSelector
Select all ClusterTrustBundles that match this label selector. Only has effect if signerName is set. Mutually-exclusive with name. If unset, interpreted as "match nothing". If set but empty, interpreted as "match everything".
name
string
Select a single ClusterTrustBundle by object name. Mutually-exclusive with signerName and labelSelector.
optional
boolean
If true, don't block pod startup if the referenced ClusterTrustBundle(s) aren't available. If using name, then the named ClusterTrustBundle is allowed not to exist. If using signerName, then the combination of signerName and labelSelector is allowed to match zero ClusterTrustBundles.
path
string
Relative path from the volume root to write the bundle.
signerName
string
Select all ClusterTrustBundles that match this signer name. Mutually-exclusive with name. The contents of all selected ClusterTrustBundles will be unified and deduplicated.

ComponentCondition v1 core

GroupVersionKind
corev1ComponentCondition

Information about the condition of a component.

FieldDescription
error
string
Condition error code for a component. For example, a health check error code.
message
string
Message about the condition for a component. For example, information about a health check.
status
string
Status of the condition for a component. Valid values for "Healthy": "True", "False", or "Unknown".
type
string
Type of condition for a component. Valid value: "Healthy"

Condition v1 meta

GroupVersionKind
metav1Condition

Condition contains details for one aspect of the current state of this API Resource.

FieldDescription
lastTransitionTime
Time
lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.
message
string
message is a human readable message indicating details about the transition. This may be an empty string.
observedGeneration
integer
observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.
reason
string
reason contains a programmatic identifier indicating the reason for the condition's last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.
status
string
status of the condition, one of True, False, Unknown.
type
string
type of condition in CamelCase or in foo.example.com/CamelCase.

ConfigMapEnvSource v1 core

GroupVersionKind
corev1ConfigMapEnvSource

ConfigMapEnvSource selects a ConfigMap to populate the environment variables with. The contents of the target ConfigMap's Data field will represent the key-value pairs as environment variables.

FieldDescription
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
Specify whether the ConfigMap must be defined

ConfigMapKeySelector v1 core

GroupVersionKind
corev1ConfigMapKeySelector

Selects a key from a ConfigMap.

FieldDescription
key
string
The key to select.
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
Specify whether the ConfigMap or its key must be defined

ConfigMapNodeConfigSource v1 core

GroupVersionKind
corev1ConfigMapNodeConfigSource

ConfigMapNodeConfigSource contains the information to reference a ConfigMap as a config source for the Node. This API is deprecated since 1.22: https://git.k8s.io/enhancements/keps/sig-node/281-dynamic-kubelet-configuration

FieldDescription
kubeletConfigKey
string
KubeletConfigKey declares which key of the referenced ConfigMap corresponds to the KubeletConfiguration structure This field is required in all cases.
name
string
Name is the metadata.name of the referenced ConfigMap. This field is required in all cases.
namespace
string
Namespace is the metadata.namespace of the referenced ConfigMap. This field is required in all cases.
resourceVersion
string
ResourceVersion is the metadata.ResourceVersion of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status.
uid
string
UID is the metadata.UID of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status.

ConfigMapProjection v1 core

GroupVersionKind
corev1ConfigMapProjection

Adapts a ConfigMap into a projected volume. The contents of the target ConfigMap's Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.

FieldDescription
items
KeyToPath array
items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
optional specify whether the ConfigMap or its keys must be defined

ConfigMapVolumeSource v1 core

GroupVersionKind
corev1ConfigMapVolumeSource

Adapts a ConfigMap into a volume. The contents of the target ConfigMap's Data field will be presented in a volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. ConfigMap volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
defaultMode
integer
defaultMode is optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
items
KeyToPath array
items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
optional specify whether the ConfigMap or its keys must be defined

ContainerImage v1 core

GroupVersionKind
corev1ContainerImage

Describe a container image

Appears In:
FieldDescription
names
string array
Names by which this image is known. e.g. ["kubernetes.example/hyperkube:v1.0.7", "cloud-vendor.registry.example/cloud-vendor/hyperkube:v1.0.7"]
sizeBytes
integer
The size of the image in bytes.

ContainerPort v1 core

GroupVersionKind
corev1ContainerPort

ContainerPort represents a network port in a single container.

FieldDescription
containerPort
integer
Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536.
hostIP
string
What host IP to bind the external port to.
hostPort
integer
Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.
name
string
If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.
protocol
string
Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

ContainerResizePolicy v1 core

GroupVersionKind
corev1ContainerResizePolicy

ContainerResizePolicy represents resource resize policy for the container.

FieldDescription
resourceName
string
Name of the resource to which this resource resize policy applies. Supported values: cpu, memory.
restartPolicy
string
Restart policy to apply when specified resource is resized. If not specified, it defaults to NotRequired.

ContainerResourceMetricSource v2 autoscaling

GroupVersionKind
autoscalingv2ContainerResourceMetricSource

ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.

FieldDescription
container
string
container is the name of the container in the pods of the scaling target
name
string
name is the name of the resource in question.
target
MetricTarget
target specifies the target value for the given metric

ContainerResourceMetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2ContainerResourceMetricStatus

ContainerResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.

FieldDescription
container
string
container is the name of the container in the pods of the scaling target
current
MetricValueStatus
current contains the current value for the given metric
name
string
name is the name of the resource in question.

ContainerState v1 core

GroupVersionKind
corev1ContainerState

ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.

FieldDescription
running
ContainerStateRunning
Details about a running container
terminated
ContainerStateTerminated
Details about a terminated container
waiting
ContainerStateWaiting
Details about a waiting container

ContainerStateRunning v1 core

GroupVersionKind
corev1ContainerStateRunning

ContainerStateRunning is a running state of a container.

FieldDescription
startedAt
Time
Time at which the container was last (re-)started

ContainerStateTerminated v1 core

GroupVersionKind
corev1ContainerStateTerminated

ContainerStateTerminated is a terminated state of a container.

FieldDescription
containerID
string
Container's ID in the format '<type>://<container_id>'
exitCode
integer
Exit status from the last termination of the container
finishedAt
Time
Time at which the container last terminated
message
string
Message regarding the last termination of the container
reason
string
(brief) reason from the last termination of the container
signal
integer
Signal from the last termination of the container
startedAt
Time
Time at which previous execution of the container started

ContainerStateWaiting v1 core

GroupVersionKind
corev1ContainerStateWaiting

ContainerStateWaiting is a waiting state of a container.

FieldDescription
message
string
Message regarding why the container is not yet running.
reason
string
(brief) reason the container is not yet running.

CrossVersionObjectReference v2 autoscaling

GroupVersionKind
autoscalingv2CrossVersionObjectReference

CrossVersionObjectReference contains enough information to let you identify the referred resource.

Other API versions of this object exist: v1
FieldDescription
apiVersion
string
apiVersion is the API version of the referent
kind
string
kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

CustomResourceColumnDefinition v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceColumnDefinition

CustomResourceColumnDefinition specifies a column for server side printing.

FieldDescription
description
string
description is a human readable description of this column.
format
string
format is an optional OpenAPI type definition for this column. The 'name' format is applied to the primary identifier column to assist in clients identifying column is the resource name. See https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#data-types for details.
jsonPath
string
jsonPath is a simple JSON path (i.e. with array notation) which is evaluated against each custom resource to produce the value for this column.
name
string
name is a human readable name for the column.
priority
integer
priority is an integer defining the relative importance of this column compared to others. Lower numbers are considered higher priority. Columns that may be omitted in limited space scenarios should be given a priority greater than 0.
type
string
type is an OpenAPI type definition for this column. See https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#data-types for details.

CustomResourceConversion v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceConversion

CustomResourceConversion describes how to convert different versions of a CR.

FieldDescription
strategy
string
strategy specifies how custom resources are converted between versions. Allowed values are: - `"None"`: The converter only change the apiVersion and would not touch any other field in the custom resource. - `"Webhook"`: API Server will call to an external webhook to do the conversion. Additional information is needed for this option. This requires spec.preserveUnknownFields to be false, and spec.conversion.webhook to be set.
webhook
WebhookConversion
webhook describes how to call the conversion webhook. Required when `strategy` is set to `"Webhook"`.

CustomResourceDefinitionCondition v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceDefinitionCondition

CustomResourceDefinitionCondition contains details for the current condition of this pod.

FieldDescription
lastTransitionTime
Time
lastTransitionTime last time the condition transitioned from one status to another.
message
string
message is a human-readable message indicating details about last transition.
reason
string
reason is a unique, one-word, CamelCase reason for the condition's last transition.
status
string
status is the status of the condition. Can be True, False, Unknown.
type
string
type is the type of the condition. Types include Established, NamesAccepted and Terminating.

CustomResourceDefinitionNames v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceDefinitionNames

CustomResourceDefinitionNames indicates the names to serve this CustomResourceDefinition

FieldDescription
categories
string array
categories is a list of grouped resources this custom resource belongs to (e.g. 'all'). This is published in API discovery documents, and used by clients to support invocations like `kubectl get all`.
kind
string
kind is the serialized kind of the resource. It is normally CamelCase and singular. Custom resource instances will use this value as the `kind` attribute in API calls.
listKind
string
listKind is the serialized kind of the list for this resource. Defaults to "`kind`List".
plural
string
plural is the plural name of the resource to serve. The custom resources are served under `/apis/<group>/<version>/.../<plural>`. Must match the name of the CustomResourceDefinition (in the form `<names.plural>.<group>`). Must be all lowercase.
shortNames
string array
shortNames are short names for the resource, exposed in API discovery documents, and used by clients to support invocations like `kubectl get <shortname>`. It must be all lowercase.
singular
string
singular is the singular name of the resource. It must be all lowercase. Defaults to lowercased `kind`.

CustomResourceDefinitionVersion v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceDefinitionVersion

CustomResourceDefinitionVersion describes a version for CRD.

FieldDescription
additionalPrinterColumns
CustomResourceColumnDefinition array
additionalPrinterColumns specifies additional columns returned in Table output. See https://kubernetes.io/docs/reference/using-api/api-concepts/#receiving-resources-as-tables for details. If no columns are specified, a single column displaying the age of the custom resource is used.
deprecated
boolean
deprecated indicates this version of the custom resource API is deprecated. When set to true, API requests to this version receive a warning header in the server response. Defaults to false.
deprecationWarning
string
deprecationWarning overrides the default warning returned to API clients. May only be set when `deprecated` is true. The default warning indicates this version is deprecated and recommends use of the newest served version of equal or greater stability, if one exists.
name
string
name is the version name, e.g. “v1”, “v2beta1”, etc. The custom resources are served under this version at `/apis/<group>/<version>/...` if `served` is true.
schema
CustomResourceValidation
schema describes the schema used for validation, pruning, and defaulting of this version of the custom resource.
selectableFields
SelectableField array
selectableFields specifies paths to fields that may be used as field selectors. A maximum of 8 selectable fields are allowed. See https://kubernetes.io/docs/concepts/overview/working-with-objects/field-selectors
served
boolean
served is a flag enabling/disabling this version from being served via REST APIs
storage
boolean
storage indicates this version should be used when persisting custom resources to storage. There must be exactly one version with storage=true.
subresources
CustomResourceSubresources
subresources specify what subresources this version of the defined custom resource have.

CustomResourceSubresourceScale v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceSubresourceScale

CustomResourceSubresourceScale defines how to serve the scale subresource for CustomResources.

FieldDescription
labelSelectorPath
string
labelSelectorPath defines the JSON path inside of a custom resource that corresponds to Scale `status.selector`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.status` or `.spec`. Must be set to work with HorizontalPodAutoscaler. The field pointed by this JSON path must be a string field (not a complex selector struct) which contains a serialized label selector in string form. More info: https://kubernetes.io/docs/tasks/access-kubernetes-api/custom-resources/custom-resource-definitions#scale-subresource If there is no value under the given path in the custom resource, the `status.selector` value in the `/scale` subresource will default to the empty string.
specReplicasPath
string
specReplicasPath defines the JSON path inside of a custom resource that corresponds to Scale `spec.replicas`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.spec`. If there is no value under the given path in the custom resource, the `/scale` subresource will return an error on GET.
statusReplicasPath
string
statusReplicasPath defines the JSON path inside of a custom resource that corresponds to Scale `status.replicas`. Only JSON paths without the array notation are allowed. Must be a JSON Path under `.status`. If there is no value under the given path in the custom resource, the `status.replicas` value in the `/scale` subresource will default to 0.

CustomResourceSubresourceStatus v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceSubresourceStatus

CustomResourceSubresourceStatus defines how to serve the status subresource for CustomResources. Status is represented by the `.status` JSON path inside of a CustomResource. When set, * exposes a /status subresource for the custom resource * PUT requests to the /status subresource take a custom resource object, and ignore changes to anything except the status stanza * PUT/POST/PATCH requests to the custom resource ignore changes to the status stanza

FieldDescription

CustomResourceSubresources v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceSubresources

CustomResourceSubresources defines the status and scale subresources for CustomResources.

FieldDescription
scale
CustomResourceSubresourceScale
scale indicates the custom resource should serve a `/scale` subresource that returns an `autoscaling/v1` Scale object.
status
CustomResourceSubresourceStatus
status indicates the custom resource should serve a `/status` subresource. When enabled: 1. requests to the custom resource primary endpoint ignore changes to the `status` stanza of the object. 2. requests to the custom resource `/status` subresource ignore changes to anything other than the `status` stanza of the object.

CustomResourceValidation v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1CustomResourceValidation

CustomResourceValidation is a list of validation methods for CustomResources.

FieldDescription
openAPIV3Schema
JSONSchemaProps
openAPIV3Schema is the OpenAPI v3 schema to use for validation and pruning.

DaemonEndpoint v1 core

GroupVersionKind
corev1DaemonEndpoint

DaemonEndpoint contains information about a single Daemon endpoint.

FieldDescription
Port
integer
Port number of the given endpoint.

DaemonSetCondition v1 apps

GroupVersionKind
appsv1DaemonSetCondition

DaemonSetCondition describes the state of a DaemonSet at a certain point.

FieldDescription
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of DaemonSet condition.

DaemonSetUpdateStrategy v1 apps

GroupVersionKind
appsv1DaemonSetUpdateStrategy

DaemonSetUpdateStrategy is a struct used to control the update strategy for a DaemonSet.

FieldDescription
rollingUpdate
RollingUpdateDaemonSet
Rolling update config params. Present only if type = "RollingUpdate".
type
string
Type of daemon set update. Can be "RollingUpdate" or "OnDelete". Default is RollingUpdate.

DeleteOptions v1 meta

GroupVersionKind
metav1DeleteOptions

DeleteOptions may be provided when deleting an API object.

Appears In:
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
dryRun
string array
When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSeconds
integer
The duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
orphanDependents
boolean
Deprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
preconditions
Preconditions
Must be fulfilled before a deletion is carried out. If not possible, a 409 Conflict status will be returned.
propagationPolicy
string
Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

DeploymentCondition v1 apps

GroupVersionKind
appsv1DeploymentCondition

DeploymentCondition describes the state of a deployment at a certain point.

FieldDescription
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
lastUpdateTime
Time
The last time this condition was updated.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of deployment condition.

DownwardAPIProjection v1 core

GroupVersionKind
corev1DownwardAPIProjection

Represents downward API info for projecting into a projected volume. Note that this is identical to a downwardAPI volume source without the default mode.

FieldDescription
items
DownwardAPIVolumeFile array
Items is a list of DownwardAPIVolume file

DownwardAPIVolumeFile v1 core

GroupVersionKind
corev1DownwardAPIVolumeFile

DownwardAPIVolumeFile represents information to create the file containing the pod field

FieldDescription
fieldRef
ObjectFieldSelector
Required: Selects a field of the pod: only annotations, labels, name, namespace and uid are supported.
mode
integer
Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
path
string
Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..'
resourceFieldRef
ResourceFieldSelector
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.

DownwardAPIVolumeSource v1 core

GroupVersionKind
corev1DownwardAPIVolumeSource

DownwardAPIVolumeSource represents a volume containing downward API info. Downward API volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
defaultMode
integer
Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
items
DownwardAPIVolumeFile array
Items is a list of downward API volume file

DriverAllocationResult v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2DriverAllocationResult

DriverAllocationResult contains vendor parameters and the allocation result for one request.

FieldDescription
namedResources
NamedResourcesAllocationResult
NamedResources describes the allocation result when using the named resources model.
vendorRequestParametersVendorRequestParameters are the per-request configuration parameters from the time that the claim was allocated.

DriverRequests v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2DriverRequests

DriverRequests describes all resources that are needed from one particular driver.

FieldDescription
driverName
string
DriverName is the name used by the DRA driver kubelet plugin.
requests
ResourceRequest array
Requests describes all resources that are needed from the driver.
vendorParametersVendorParameters are arbitrary setup parameters for all requests of the claim. They are ignored while allocating the claim.

EmptyDirVolumeSource v1 core

GroupVersionKind
corev1EmptyDirVolumeSource

Represents an empty directory for a pod. Empty directory volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
medium
string
medium represents what type of storage medium should back this directory. The default is "" which means to use the node's default medium. Must be an empty string (default) or Memory. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir
sizeLimit
Quantity
sizeLimit is the total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

Endpoint v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1Endpoint

Endpoint represents a single logical "backend" implementing a service.

FieldDescription
addresses
string array
addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
conditions
EndpointConditions
conditions contains information about the current status of the endpoint.
deprecatedTopology
object
deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24). While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
hints
EndpointHints
hints contains information associated with how an endpoint should be consumed.
hostname
string
hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
nodeName
string
nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
targetRef
ObjectReference
targetRef is a reference to a Kubernetes object that represents this endpoint.
zone
string
zone is the name of the Zone this endpoint exists in.

EndpointAddress v1 core

GroupVersionKind
corev1EndpointAddress

EndpointAddress is a tuple that describes single IP address.

FieldDescription
hostname
string
The Hostname of this endpoint
ip
string
The IP of this endpoint. May not be loopback (127.0.0.0/8 or ::1), link-local (169.254.0.0/16 or fe80::/10), or link-local multicast (224.0.0.0/24 or ff02::/16).
nodeName
string
Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node.
targetRef
ObjectReference
Reference to object providing the endpoint.

EndpointConditions v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1EndpointConditions

EndpointConditions represents the current condition of an endpoint.

FieldDescription
ready
boolean
ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
serving
boolean
serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
terminating
boolean
terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

EndpointHints v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1EndpointHints

EndpointHints provides hints describing how an endpoint should be consumed.

FieldDescription
forZones
ForZone array
forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

EndpointPort v1 core

GroupVersionKind
corev1EndpointPort

EndpointPort is a tuple that describes a single port.

FieldDescription
appProtocol
string
The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
name
string
The name of this port. This must match the 'name' field in the corresponding ServicePort. Must be a DNS_LABEL. Optional only if one port is defined.
port
integer
The port number of the endpoint.
protocol
string
The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

EndpointSubset v1 core

GroupVersionKind
corev1EndpointSubset

EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given: { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] } The resulting set of endpoints can be viewed as: a: [ 10.10.1.1:8675, 10.10.2.2:8675 ], b: [ 10.10.1.1:309, 10.10.2.2:309 ]

Appears In:
FieldDescription
addresses
EndpointAddress array
IP addresses which offer the related ports that are marked as ready. These endpoints should be considered safe for load balancers and clients to utilize.
notReadyAddresses
EndpointAddress array
IP addresses which offer the related ports but are not currently marked as ready because they have not yet finished starting, have recently failed a readiness check, or have recently failed a liveness check.
ports
EndpointPort array
Port numbers available on the related IP addresses.

EnvFromSource v1 core

GroupVersionKind
corev1EnvFromSource

EnvFromSource represents the source of a set of ConfigMaps

FieldDescription
configMapRef
ConfigMapEnvSource
The ConfigMap to select from
prefix
string
An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.
secretRef
SecretEnvSource
The Secret to select from

EnvVar v1 core

GroupVersionKind
corev1EnvVar

EnvVar represents an environment variable present in a Container.

FieldDescription
name
string
Name of the environment variable. Must be a C_IDENTIFIER.
value
string
Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".
valueFrom
EnvVarSource
Source for the environment variable's value. Cannot be used if value is not empty.

EnvVarSource v1 core

GroupVersionKind
corev1EnvVarSource

EnvVarSource represents a source for the value of an EnvVar.

Appears In:
FieldDescription
configMapKeyRef
ConfigMapKeySelector
Selects a key of a ConfigMap.
fieldRef
ObjectFieldSelector
Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['<KEY>']`, `metadata.annotations['<KEY>']`, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs.
resourceFieldRef
ResourceFieldSelector
Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported.
secretKeyRef
SecretKeySelector
Selects a key of a secret in the pod's namespace

EphemeralContainer v1 core

GroupVersionKind
corev1EphemeralContainer

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation. To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

Appears In:
FieldDescription
args
string array
Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
command
string array
Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell
env
EnvVar array
patch strategy: merge
patch merge key: name
List of environment variables to set in the container. Cannot be updated.
envFrom
EnvFromSource array
List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.
image
string
Container image name. More info: https://kubernetes.io/docs/concepts/containers/images
imagePullPolicy
string
Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images
lifecycle
Lifecycle
Lifecycle is not allowed for ephemeral containers.
livenessProbe
Probe
Probes are not allowed for ephemeral containers.
name
string
Name of the ephemeral container specified as a DNS_LABEL. This name must be unique among all containers, init containers and ephemeral containers.
ports
ContainerPort array
patch strategy: merge
patch merge key: containerPort
Ports are not allowed for ephemeral containers.
readinessProbe
Probe
Probes are not allowed for ephemeral containers.
resizePolicy
ContainerResizePolicy array
Resources resize policy for the container.
resources
ResourceRequirements
Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources already allocated to the pod.
restartPolicy
string
Restart policy for the container to manage the restart behavior of each container within a pod. This may only be set for init containers. You cannot set this field on ephemeral containers.
securityContext
SecurityContext
Optional: SecurityContext defines the security options the ephemeral container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.
startupProbe
Probe
Probes are not allowed for ephemeral containers.
stdin
boolean
Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.
stdinOnce
boolean
Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false
targetContainerName
string
If set, the name of the container from PodSpec that this ephemeral container targets. The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. If not set then the ephemeral container uses the namespaces configured in the Pod spec. The container runtime must implement support for this feature. If the runtime does not support namespace targeting then the result of setting this field is undefined.
terminationMessagePath
string
Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.
terminationMessagePolicy
string
Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.
tty
boolean
Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.
volumeDevices
VolumeDevice array
patch strategy: merge
patch merge key: devicePath
volumeDevices is the list of block devices to be used by the container.
volumeMounts
VolumeMount array
patch strategy: merge
patch merge key: mountPath
Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. Cannot be updated.
workingDir
string
Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.

EphemeralVolumeSource v1 core

GroupVersionKind
corev1EphemeralVolumeSource

Represents an ephemeral volume that is handled by a normal storage driver.

Appears In:
FieldDescription
volumeClaimTemplate
PersistentVolumeClaimTemplate
Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e. the PVC will be deleted together with the pod. The name of the PVC will be `<pod name>-<volume name>` where `<volume name>` is the name from the `PodSpec.Volumes` array entry. Pod validation will reject the pod if the concatenated name is not valid for a PVC (for example, too long). An existing PVC with that name that is not owned by the pod will *not* be used for the pod to avoid using an unrelated volume by mistake. Starting the pod is then blocked until the unrelated PVC is removed. If such a pre-created PVC is meant to be used by the pod, the PVC has to updated with an owner reference to the pod once the pod exists. Normally this should not be necessary, but it may be useful when manually reconstructing a broken cluster. This field is read-only and no changes will be made by Kubernetes to the PVC after it has been created. Required, must not be nil.

EventSeries v1 events.k8s.io

GroupVersionKind
events.k8s.iov1EventSeries

EventSeries contain information on series of events, i.e. thing that was/is happening continuously for some time. How often to update the EventSeries is up to the event reporters. The default event reporter in "k8s.io/client-go/tools/events/event_broadcaster.go" shows how this struct is updated on heartbeats and can guide customized reporter implementations.

Appears In:
FieldDescription
count
integer
count is the number of occurrences in this series up to the last heartbeat time.
lastObservedTime
MicroTime
lastObservedTime is the time when last Event from the series was seen before last heartbeat.

EventSource v1 core

GroupVersionKind
corev1EventSource

EventSource contains information for an event.

FieldDescription
component
string
Component from which the event is generated.
host
string
Node name on which the event is generated.

Eviction v1 policy

GroupVersionKind
policyv1Eviction

Eviction evicts a pod from its node subject to certain policies and safety constraints. This is a subresource of Pod. A request to cause such an eviction is created by POSTing to .../pods/<pod name>/evictions.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
deleteOptions
DeleteOptions
DeleteOptions may be provided
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
ObjectMeta describes the pod that is being evicted.

ExecAction v1 core

GroupVersionKind
corev1ExecAction

ExecAction describes a "run in container" action.

FieldDescription
command
string array
Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.

ExemptPriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1ExemptPriorityLevelConfiguration

ExemptPriorityLevelConfiguration describes the configurable aspects of the handling of exempt requests. In the mandatory exempt configuration object the values in the fields here can be modified by authorized users, unlike the rest of the `spec`.

Other API versions of this object exist: v1beta3
FieldDescription
lendablePercent
integer
`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. This value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )
nominalConcurrencyShares
integer
`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats nominally reserved for this priority level. This DOES NOT limit the dispatching from this priority level but affects the other priority levels through the borrowing mechanism. The server's concurrency limit (ServerCL) is divided among all the priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of zero.

ExpressionWarning v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ExpressionWarning

ExpressionWarning is a warning information that targets a specific expression.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
fieldRef
string
The path to the field that refers the expression. For example, the reference to the expression of the first item of validations is "spec.validations[0].expression"
warning
string
The content of type checking information in a human-readable form. Each line of the warning contains the type that the expression is checked against, followed by the type check error from the compiler.

ExternalDocumentation v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1ExternalDocumentation

ExternalDocumentation allows referencing an external resource for extended documentation.

FieldDescription
description
string
url
string

ExternalMetricSource v2 autoscaling

GroupVersionKind
autoscalingv2ExternalMetricSource

ExternalMetricSource indicates how to scale on a metric not associated with any Kubernetes object (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).

FieldDescription
metric
MetricIdentifier
metric identifies the target metric by name and selector
target
MetricTarget
target specifies the target value for the given metric

ExternalMetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2ExternalMetricStatus

ExternalMetricStatus indicates the current value of a global metric not associated with any Kubernetes object.

FieldDescription
current
MetricValueStatus
current contains the current value for the given metric
metric
MetricIdentifier
metric identifies the target metric by name and selector

FCVolumeSource v1 core

GroupVersionKind
corev1FCVolumeSource

Represents a Fibre Channel volume. Fibre Channel volumes can only be mounted as read/write once. Fibre Channel volumes support ownership management and SELinux relabeling.

FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
lun
integer
lun is Optional: FC target lun number
readOnly
boolean
readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
targetWWNs
string array
targetWWNs is Optional: FC target worldwide names (WWNs)
wwids
string array
wwids Optional: FC volume world wide identifiers (wwids) Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.

FieldsV1 v1 meta

GroupVersionKind
metav1FieldsV1

FieldsV1 stores a set of fields in a data structure like a Trie, in JSON format. Each key is either a '.' representing the field itself, and will always map to an empty set, or a string representing a sub-field or item. The string will follow one of these four formats: 'f:<name>', where <name> is the name of a field in a struct, or key in a map 'v:<value>', where <value> is the exact json formatted value of a list item 'i:<index>', where <index> is position of a item in a list 'k:<keys>', where <keys> is a map of a list item's key fields to their unique values If a key maps to an empty Fields value, the field that key represents is part of the set. The exact format is defined in sigs.k8s.io/structured-merge-diff

FieldDescription

FlexPersistentVolumeSource v1 core

GroupVersionKind
corev1FlexPersistentVolumeSource

FlexPersistentVolumeSource represents a generic persistent volume resource that is provisioned/attached using an exec based plugin.

FieldDescription
driver
string
driver is the name of the driver to use for this volume.
fsType
string
fsType is the Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.
options
object
options is Optional: this field holds extra command options if any.
readOnly
boolean
readOnly is Optional: defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
SecretReference
secretRef is Optional: SecretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.

FlexVolumeSource v1 core

GroupVersionKind
corev1FlexVolumeSource

FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.

Appears In:
FieldDescription
driver
string
driver is the name of the driver to use for this volume.
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script.
options
object
options is Optional: this field holds extra command options if any.
readOnly
boolean
readOnly is Optional: defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
LocalObjectReference
secretRef is Optional: secretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.

FlockerVolumeSource v1 core

GroupVersionKind
corev1FlockerVolumeSource

Represents a Flocker volume mounted by the Flocker agent. One and only one of datasetName and datasetUUID should be set. Flocker volumes do not support ownership management or SELinux relabeling.

FieldDescription
datasetName
string
datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker should be considered as deprecated
datasetUUID
string
datasetUUID is the UUID of the dataset. This is unique identifier of a Flocker dataset

FlowDistinguisherMethod v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1FlowDistinguisherMethod

FlowDistinguisherMethod specifies the method of a flow distinguisher.

Other API versions of this object exist: v1beta3
FieldDescription
type
string
`type` is the type of flow distinguisher method The supported types are "ByUser" and "ByNamespace". Required.

FlowSchemaCondition v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1FlowSchemaCondition

FlowSchemaCondition describes conditions for a FlowSchema.

Other API versions of this object exist: v1beta3
FieldDescription
lastTransitionTime
Time
`lastTransitionTime` is the last time the condition transitioned from one status to another.
message
string
`message` is a human-readable message indicating details about last transition.
reason
string
`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
status
string
`status` is the status of the condition. Can be True, False, Unknown. Required.
type
string
`type` is the type of the condition. Required.

ForZone v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1ForZone

ForZone provides information about which zones should consume this endpoint.

FieldDescription
name
string
name represents the name of the zone.

GCEPersistentDiskVolumeSource v1 core

GroupVersionKind
corev1GCEPersistentDiskVolumeSource

Represents a Persistent Disk resource in Google Compute Engine. A GCE PD must exist before mounting to a container. The disk must also be in the same GCE project and zone as the kubelet. A GCE PD can only be mounted as read/write once or read-only many times. GCE PDs support ownership management and SELinux relabeling.

FieldDescription
fsType
string
fsType is filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
partition
integer
partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
pdName
string
pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
readOnly
boolean
readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

GRPCAction v1 core

GroupVersionKind
corev1GRPCAction

Appears In:
FieldDescription
port
integer
Port number of the gRPC service. Number must be in the range 1 to 65535.
service
string
Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC.

GitRepoVolumeSource v1 core

GroupVersionKind
corev1GitRepoVolumeSource

Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.

Appears In:
FieldDescription
directory
string
directory is the target directory name. Must not contain or start with '..'. If '.' is supplied, the volume directory will be the git repository. Otherwise, if specified, the volume will contain the git repository in the subdirectory with the given name.
repository
string
repository is the URL
revision
string
revision is the commit hash for the specified revision.

GlusterfsPersistentVolumeSource v1 core

GroupVersionKind
corev1GlusterfsPersistentVolumeSource

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

FieldDescription
endpoints
string
endpoints is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
endpointsNamespace
string
endpointsNamespace is the namespace that contains Glusterfs endpoint. If this field is empty, the EndpointNamespace defaults to the same namespace as the bound PVC. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
path
string
path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
readOnly
boolean
readOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

GlusterfsVolumeSource v1 core

GroupVersionKind
corev1GlusterfsVolumeSource

Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.

Appears In:
FieldDescription
endpoints
string
endpoints is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
path
string
path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod
readOnly
boolean
readOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod

GroupSubject v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1GroupSubject

GroupSubject holds detailed information for group-kind subject.

Other API versions of this object exist: v1beta3
FieldDescription
name
string
name is the user group that matches, or "*" to match all user groups. See https://github.com/kubernetes/apiserver/blob/master/pkg/authentication/user/user.go for some well-known group names. Required.

GroupVersionForDiscovery v1 meta

GroupVersionKind
metav1GroupVersionForDiscovery

GroupVersion contains the "group/version" and "version" string of a version. It is made a struct to keep extensibility.

Appears In:
FieldDescription
groupVersion
string
groupVersion specifies the API group and version in the form "group/version"
version
string
version specifies the version in the form of "version". This is to save the clients the trouble of splitting the GroupVersion.

GroupVersionResource v1alpha1 storagemigration.k8s.io

GroupVersionKind
storagemigration.k8s.iov1alpha1GroupVersionResource

The names of the group, the version, and the resource.

FieldDescription
group
string
The name of the group.
resource
string
The name of the resource.
version
string
The name of the version.

HPAScalingPolicy v2 autoscaling

GroupVersionKind
autoscalingv2HPAScalingPolicy

HPAScalingPolicy is a single policy which must hold true for a specified past interval.

FieldDescription
periodSeconds
integer
periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
type
string
type is used to specify the scaling policy.
value
integer
value contains the amount of change which is permitted by the policy. It must be greater than zero

HPAScalingRules v2 autoscaling

GroupVersionKind
autoscalingv2HPAScalingRules

HPAScalingRules configures the scaling behavior for one direction. These Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen.

FieldDescription
policies
HPAScalingPolicy array
policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
selectPolicy
string
selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
stabilizationWindowSeconds
integer
stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).

HTTPGetAction v1 core

GroupVersionKind
corev1HTTPGetAction

HTTPGetAction describes an action based on HTTP Get requests.

FieldDescription
host
string
Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
httpHeaders
HTTPHeader array
Custom headers to set in the request. HTTP allows repeated headers.
path
string
Path to access on the HTTP server.
portName or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.
scheme
string
Scheme to use for connecting to the host. Defaults to HTTP.

HTTPHeader v1 core

GroupVersionKind
corev1HTTPHeader

HTTPHeader describes a custom header to be used in HTTP probes

FieldDescription
name
string
The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.
value
string
The header field value

HTTPIngressPath v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1HTTPIngressPath

HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.

FieldDescription
backend
IngressBackend
backend defines the referenced service endpoint to which the traffic will be forwarded to.
path
string
path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
pathType
string
pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the '/' separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz). * ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types.

HTTPIngressRuleValue v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1HTTPIngressRuleValue

HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: http://<host>/<path>?<searchpart> -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last '/' and before the first '?' or '#'.

FieldDescription
paths
HTTPIngressPath array
paths is a collection of paths that map requests to backends.

HorizontalPodAutoscalerBehavior v2 autoscaling

GroupVersionKind
autoscalingv2HorizontalPodAutoscalerBehavior

HorizontalPodAutoscalerBehavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively).

FieldDescription
scaleDown
HPAScalingRules
scaleDown is scaling policy for scaling Down. If not set, the default value is to allow to scale down to minReplicas pods, with a 300 second stabilization window (i.e., the highest recommendation for the last 300sec is used).
scaleUp
HPAScalingRules
scaleUp is scaling policy for scaling Up. If not set, the default value is the higher of: * increase no more than 4 pods per 60 seconds * double the number of pods per 60 seconds No stabilization is used.

HorizontalPodAutoscalerCondition v2 autoscaling

GroupVersionKind
autoscalingv2HorizontalPodAutoscalerCondition

HorizontalPodAutoscalerCondition describes the state of a HorizontalPodAutoscaler at a certain point.

FieldDescription
lastTransitionTime
Time
lastTransitionTime is the last time the condition transitioned from one status to another
message
string
message is a human-readable explanation containing details about the transition
reason
string
reason is the reason for the condition's last transition.
status
string
status is the status of the condition (True, False, Unknown)
type
string
type describes the current condition

HostAlias v1 core

GroupVersionKind
corev1HostAlias

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod's hosts file.

Appears In:
FieldDescription
hostnames
string array
Hostnames for the above IP address.
ip
string
IP address of the host file entry.

HostIP v1 core

GroupVersionKind
corev1HostIP

HostIP represents a single IP address allocated to the host.

Appears In:
FieldDescription
ip
string
IP is the IP address assigned to the host

HostPathVolumeSource v1 core

GroupVersionKind
corev1HostPathVolumeSource

Represents a host path mapped into a pod. Host path volumes do not support ownership management or SELinux relabeling.

FieldDescription
path
string
path of the directory on the host. If the path is a symlink, it will follow the link to the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
type
string
type for HostPath Volume Defaults to "" More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath

IPBlock v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IPBlock

IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.

FieldDescription
cidr
string
cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
except
string array
except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range

ISCSIPersistentVolumeSource v1 core

GroupVersionKind
corev1ISCSIPersistentVolumeSource

ISCSIPersistentVolumeSource represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

FieldDescription
chapAuthDiscovery
boolean
chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication
chapAuthSession
boolean
chapAuthSession defines whether support iSCSI Session CHAP authentication
fsType
string
fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
initiatorName
string
initiatorName is the custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection.
iqn
string
iqn is Target iSCSI Qualified Name.
iscsiInterface
string
iscsiInterface is the interface Name that uses an iSCSI transport. Defaults to 'default' (tcp).
lun
integer
lun is iSCSI Target Lun number.
portals
string array
portals is the iSCSI Target Portal List. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).
readOnly
boolean
readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false.
secretRef
SecretReference
secretRef is the CHAP Secret for iSCSI target and initiator authentication
targetPortal
string
targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

ISCSIVolumeSource v1 core

GroupVersionKind
corev1ISCSIVolumeSource

Represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
chapAuthDiscovery
boolean
chapAuthDiscovery defines whether support iSCSI Discovery CHAP authentication
chapAuthSession
boolean
chapAuthSession defines whether support iSCSI Session CHAP authentication
fsType
string
fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
initiatorName
string
initiatorName is the custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection.
iqn
string
iqn is the target iSCSI Qualified Name.
iscsiInterface
string
iscsiInterface is the interface Name that uses an iSCSI transport. Defaults to 'default' (tcp).
lun
integer
lun represents iSCSI Target Lun number.
portals
string array
portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).
readOnly
boolean
readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false.
secretRef
LocalObjectReference
secretRef is the CHAP Secret for iSCSI target and initiator authentication
targetPortal
string
targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260).

IngressBackend v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressBackend

IngressBackend describes all endpoints for a given service and port.

FieldDescription
resource
TypedLocalObjectReference
resource is an ObjectRef to another Kubernetes resource in the namespace of the Ingress object. If resource is specified, a service.Name and service.Port must not be specified. This is a mutually exclusive setting with "Service".
service
IngressServiceBackend
service references a service as a backend. This is a mutually exclusive setting with "Resource".

IngressClassParametersReference v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressClassParametersReference

IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.

FieldDescription
apiGroup
string
apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
kind
string
kind is the type of resource being referenced.
name
string
name is the name of resource being referenced.
namespace
string
namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
scope
string
scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".

IngressLoadBalancerIngress v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressLoadBalancerIngress

IngressLoadBalancerIngress represents the status of a load-balancer ingress point.

FieldDescription
hostname
string
hostname is set for load-balancer ingress points that are DNS based.
ip
string
ip is set for load-balancer ingress points that are IP based.
ports
IngressPortStatus array
ports provides information about the ports exposed by this LoadBalancer.

IngressLoadBalancerStatus v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressLoadBalancerStatus

IngressLoadBalancerStatus represents the status of a load-balancer.

FieldDescription
ingress
IngressLoadBalancerIngress array
ingress is a list containing ingress points for the load-balancer.

IngressPortStatus v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressPortStatus

IngressPortStatus represents the error condition of a service port

FieldDescription
error
string
error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names - cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
port
integer
port is the port number of the ingress port.
protocol
string
protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"

IngressRule v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressRule

IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.

FieldDescription
host
string
host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the IP in the Spec of the parent Ingress. 2. The `:` delimiter is not respected because ports are not allowed. Currently the port of an Ingress is implicitly :80 for http and :443 for https. Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue. host can be "precise" which is a domain name without the terminating dot of a network host (e.g. "foo.bar.com") or "wildcard", which is a domain name prefixed with a single wildcard label (e.g. "*.foo.com"). The wildcard character '\*' must appear by itself as the first DNS label and matches only a single label. You cannot have a wildcard label by itself (e.g. Host == "*"). Requests will be matched against the Host field in the following way: 1. If host is precise, the request matches this rule if the http host header is equal to Host. 2. If host is a wildcard, then the request matches this rule if the http host header is to equal to the suffix (removing the first label) of the wildcard rule.
http
HTTPIngressRuleValue

IngressServiceBackend v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressServiceBackend

IngressServiceBackend references a Kubernetes Service as a Backend.

FieldDescription
name
string
name is the referenced service. The service must exist in the same namespace as the Ingress object.
port
ServiceBackendPort
port of the referenced service. A port name or port number is required for a IngressServiceBackend.

IngressTLS v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1IngressTLS

IngressTLS describes the transport layer security associated with an ingress.

FieldDescription
hosts
string array
hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
secretName
string
secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.

JSON v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1JSON

JSON represents any valid JSON value. These types are supported: bool, int64, float64, string, []interface{}, map[string]interface{} and nil.

FieldDescription

JSONSchemaProps v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1JSONSchemaProps

JSONSchemaProps is a JSON-Schema following Specification Draft 4 (http://json-schema.org/).

FieldDescription
$ref
string
$schema
string
additionalItems
JSONSchemaPropsOrBool
additionalProperties
JSONSchemaPropsOrBool
allOf
JSONSchemaProps array
anyOf
JSONSchemaProps array
default
JSON
default is a default value for undefined object fields. Defaulting is a beta feature under the CustomResourceDefaulting feature gate. Defaulting requires spec.preserveUnknownFields to be false.
definitions
object
dependencies
object
description
string
enum
JSON array
example
JSON
exclusiveMaximum
boolean
exclusiveMinimum
boolean
externalDocs
ExternalDocumentation
format
string
format is an OpenAPI v3 format string. Unknown formats are ignored. The following formats are validated: - bsonobjectid: a bson object ID, i.e. a 24 characters hex string - uri: an URI as parsed by Golang net/url.ParseRequestURI - email: an email address as parsed by Golang net/mail.ParseAddress - hostname: a valid representation for an Internet host name, as defined by RFC 1034, section 3.1 [RFC1034]. - ipv4: an IPv4 IP as parsed by Golang net.ParseIP - ipv6: an IPv6 IP as parsed by Golang net.ParseIP - cidr: a CIDR as parsed by Golang net.ParseCIDR - mac: a MAC address as parsed by Golang net.ParseMAC - uuid: an UUID that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?[0-9a-f]{4}-?[0-9a-f]{4}-?[0-9a-f]{12}$ - uuid3: an UUID3 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?3[0-9a-f]{3}-?[0-9a-f]{4}-?[0-9a-f]{12}$ - uuid4: an UUID4 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?4[0-9a-f]{3}-?[89ab][0-9a-f]{3}-?[0-9a-f]{12}$ - uuid5: an UUID5 that allows uppercase defined by the regex (?i)^[0-9a-f]{8}-?[0-9a-f]{4}-?5[0-9a-f]{3}-?[89ab][0-9a-f]{3}-?[0-9a-f]{12}$ - isbn: an ISBN10 or ISBN13 number string like "0321751043" or "978-0321751041" - isbn10: an ISBN10 number string like "0321751043" - isbn13: an ISBN13 number string like "978-0321751041" - creditcard: a credit card number defined by the regex ^(?:4[0-9]{12}(?:[0-9]{3})?|5[1-5][0-9]{14}|6(?:011|5[0-9][0-9])[0-9]{12}|3[47][0-9]{13}|3(?:0[0-5]|[68][0-9])[0-9]{11}|(?:2131|1800|35\d{3})\d{11})$ with any non digit characters mixed in - ssn: a U.S. social security number following the regex ^\d{3}[- ]?\d{2}[- ]?\d{4}$ - hexcolor: an hexadecimal color code like "#FFFFFF: following the regex ^#?([0-9a-fA-F]{3}|[0-9a-fA-F]{6})$ - rgbcolor: an RGB color code like rgb like "rgb(255,255,2559" - byte: base64 encoded binary data - password: any kind of string - date: a date string like "2006-01-02" as defined by full-date in RFC3339 - duration: a duration string like "22 ns" as parsed by Golang time.ParseDuration or compatible with Scala duration format - datetime: a date time string like "2014-12-15T19:30:20.000Z" as defined by date-time in RFC3339.
id
string
items
JSONSchemaPropsOrArray
maxItems
integer
maxLength
integer
maxProperties
integer
maximum
number
minItems
integer
minLength
integer
minProperties
integer
minimum
number
multipleOf
number
not
JSONSchemaProps
nullable
boolean
oneOf
JSONSchemaProps array
pattern
string
patternProperties
object
properties
object
required
string array
title
string
type
string
uniqueItems
boolean
x-kubernetes-embedded-resource
boolean
x-kubernetes-embedded-resource defines that the value is an embedded Kubernetes runtime.Object, with TypeMeta and ObjectMeta. The type must be object. It is allowed to further restrict the embedded object. kind, apiVersion and metadata are validated automatically. x-kubernetes-preserve-unknown-fields is allowed to be true, but does not have to be if the object is fully specified (up to kind, apiVersion, metadata).
x-kubernetes-int-or-string
boolean
x-kubernetes-int-or-string specifies that this value is either an integer or a string. If this is true, an empty type is allowed and type as child of anyOf is permitted if following one of the following patterns: 1) anyOf: - type: integer - type: string 2) allOf: - anyOf: - type: integer - type: string - ... zero or more
x-kubernetes-list-map-keys
string array
x-kubernetes-list-map-keys annotates an array with the x-kubernetes-list-type `map` by specifying the keys used as the index of the map. This tag MUST only be used on lists that have the "x-kubernetes-list-type" extension set to "map". Also, the values specified for this attribute must be a scalar typed field of the child structure (no nesting is supported). The properties specified must either be required or have a default value, to ensure those properties are present for all list items.
x-kubernetes-list-type
string
x-kubernetes-list-type annotates an array to further describe its topology. This extension must only be used on lists and may have 3 possible values: 1) `atomic`: the list is treated as a single entity, like a scalar. Atomic lists will be entirely replaced when updated. This extension may be used on any type of list (struct, scalar, ...). 2) `set`: Sets are lists that must not have multiple items with the same value. Each value must be a scalar, an object with x-kubernetes-map-type `atomic` or an array with x-kubernetes-list-type `atomic`. 3) `map`: These lists are like maps in that their elements have a non-index key used to identify them. Order is preserved upon merge. The map tag must only be used on a list with elements of type object. Defaults to atomic for arrays.
x-kubernetes-map-type
string
x-kubernetes-map-type annotates an object to further describe its topology. This extension must only be used when type is object and may have 2 possible values: 1) `granular`: These maps are actual maps (key-value pairs) and each fields are independent from each other (they can each be manipulated by separate actors). This is the default behaviour for all maps. 2) `atomic`: the list is treated as a single entity, like a scalar. Atomic maps will be entirely replaced when updated.
x-kubernetes-preserve-unknown-fields
boolean
x-kubernetes-preserve-unknown-fields stops the API server decoding step from pruning fields which are not specified in the validation schema. This affects fields recursively, but switches back to normal pruning behaviour if nested properties or additionalProperties are specified in the schema. This can either be true or undefined. False is forbidden.
x-kubernetes-validations
ValidationRule array
patch strategy: merge
patch merge key: rule
x-kubernetes-validations describes a list of validation rules written in the CEL expression language. This field is an alpha-level. Using this field requires the feature gate `CustomResourceValidationExpressions` to be enabled.

JSONSchemaPropsOrArray v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1JSONSchemaPropsOrArray

JSONSchemaPropsOrArray represents a value that can either be a JSONSchemaProps or an array of JSONSchemaProps. Mainly here for serialization purposes.

FieldDescription

JSONSchemaPropsOrBool v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1JSONSchemaPropsOrBool

JSONSchemaPropsOrBool represents JSONSchemaProps or a boolean value. Defaults to true for the boolean property.

FieldDescription

JobCondition v1 batch

GroupVersionKind
batchv1JobCondition

JobCondition describes current state of a job.

Appears In:
FieldDescription
lastProbeTime
Time
Last time the condition was checked.
lastTransitionTime
Time
Last time the condition transit from one status to another.
message
string
Human readable message indicating details about last transition.
reason
string
(brief) reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of job condition, Complete or Failed.

JobTemplateSpec v1 batch

GroupVersionKind
batchv1JobTemplateSpec

JobTemplateSpec describes the data a Job should have when created from a template

FieldDescription
metadata
ObjectMeta
Standard object's metadata of the jobs created from this template. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
JobSpec
Specification of the desired behavior of the job. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

KeyToPath v1 core

GroupVersionKind
corev1KeyToPath

Maps a string key to a path within a volume.

FieldDescription
key
string
key is the key to project.
mode
integer
mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
path
string
path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

LabelSelector v1 meta

GroupVersionKind
metav1LabelSelector

A label selector is a label query over a set of resources. The result of matchLabels and matchExpressions are ANDed. An empty label selector matches all objects. A null label selector matches no objects.

FieldDescription
matchExpressions
LabelSelectorRequirement array
matchExpressions is a list of label selector requirements. The requirements are ANDed.
matchLabels
object
matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

LabelSelectorRequirement v1 meta

GroupVersionKind
metav1LabelSelectorRequirement

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

FieldDescription
key
string
key is the label key that the selector applies to.
operator
string
operator represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
values
string array
values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

Lifecycle v1 core

GroupVersionKind
corev1Lifecycle

Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.

FieldDescription
postStart
LifecycleHandler
PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks
preStop
LifecycleHandler
PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks

LifecycleHandler v1 core

GroupVersionKind
corev1LifecycleHandler

LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.

Appears In:
FieldDescription
exec
ExecAction
Exec specifies the action to take.
httpGet
HTTPGetAction
HTTPGet specifies the http request to perform.
sleep
SleepAction
Sleep represents the duration that the container should sleep before being terminated.
tcpSocket
TCPSocketAction
Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.

LimitRangeItem v1 core

GroupVersionKind
corev1LimitRangeItem

LimitRangeItem defines a min/max usage limit for any resource that matches on kind.

FieldDescription
default
object
Default resource requirement limit value by resource name if resource limit is omitted.
defaultRequest
object
DefaultRequest is the default resource requirement request value by resource name if resource request is omitted.
max
object
Max usage constraints on this kind by resource name.
maxLimitRequestRatio
object
MaxLimitRequestRatio if specified, the named resource must have a request and limit that are both non-zero where limit divided by request is less than or equal to the enumerated value; this represents the max burst for the named resource.
min
object
Min usage constraints on this kind by resource name.
type
string
Type of resource that this limit applies to.

LimitResponse v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1LimitResponse

LimitResponse defines how to handle requests that can not be executed right now.

Other API versions of this object exist: v1beta3
FieldDescription
queuing
QueuingConfiguration
`queuing` holds the configuration parameters for queuing. This field may be non-empty only if `type` is `"Queue"`.
type
string
`type` is "Queue" or "Reject". "Queue" means that requests that can not be executed upon arrival are held in a queue until they can be executed or a queuing limit is reached. "Reject" means that requests that can not be executed upon arrival are rejected. Required.

LimitedPriorityLevelConfiguration v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1LimitedPriorityLevelConfiguration

LimitedPriorityLevelConfiguration specifies how to handle requests that are subject to limits. It addresses two issues: - How are requests for this priority level limited? - What should be done with requests that exceed the limit?

Other API versions of this object exist: v1beta3
FieldDescription
borrowingLimitPercent
integer
`borrowingLimitPercent`, if present, configures a limit on how many seats this priority level can borrow from other priority levels. The limit is known as this level's BorrowingConcurrencyLimit (BorrowingCL) and is a limit on the total number of seats that this level may borrow at any one time. This field holds the ratio of that limit to the level's nominal concurrency limit. When this field is non-nil, it must hold a non-negative integer and the limit is calculated as follows. BorrowingCL(i) = round( NominalCL(i) * borrowingLimitPercent(i)/100.0 ) The value of this field can be more than 100, implying that this priority level can borrow a number of seats that is greater than its own nominal concurrency limit (NominalCL). When this field is left `nil`, the limit is effectively infinite.
lendablePercent
integer
`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. The value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )
limitResponse
LimitResponse
`limitResponse` indicates what to do with requests that can not be executed right now
nominalConcurrencyShares
integer
`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server's concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. If not specified, this field defaults to a value of 30. Setting this field to zero supports the construction of a "jail" for this priority level that is used to hold some request(s)

ListMeta v1 meta

GroupVersionKind
metav1ListMeta

ListMeta describes metadata that synthetic resources must have, including lists and various status objects. A resource may have only one of {ObjectMeta, ListMeta}.

Appears In:
FieldDescription
continue
string
continue may be set if the user set a limit on the number of items returned, and indicates that the server has more data available. The value is opaque and may be used to issue another request to the endpoint that served this list to retrieve the next set of available objects. Continuing a consistent list may not be possible if the server configuration has changed or more than a few minutes have passed. The resourceVersion field returned when using this continue value will be identical to the value in the first response, unless you have received this token from an error message.
remainingItemCount
integer
remainingItemCount is the number of subsequent items in the list which are not included in this list response. If the list request contained label or field selectors, then the number of remaining items is unknown and the field will be left unset and omitted during serialization. If the list is complete (either because it is not chunking or because this is the last chunk), then there are no more remaining items and this field will be left unset and omitted during serialization. Servers older than v1.15 do not set this field. The intended use of the remainingItemCount is *estimating* the size of a collection. Clients should not rely on the remainingItemCount to be set or to be exact.
resourceVersion
string
String that identifies the server's internal version of this object that can be used by clients to determine when objects have changed. Value must be treated as opaque by clients and passed unmodified back to the server. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
selfLink
string
Deprecated: selfLink is a legacy read-only field that is no longer populated by the system.

LoadBalancerIngress v1 core

GroupVersionKind
corev1LoadBalancerIngress

LoadBalancerIngress represents the status of a load-balancer ingress point: traffic intended for the service should be sent to an ingress point.

FieldDescription
hostname
string
Hostname is set for load-balancer ingress points that are DNS based (typically AWS load-balancers)
ip
string
IP is set for load-balancer ingress points that are IP based (typically GCE or OpenStack load-balancers)
ipMode
string
IPMode specifies how the load-balancer IP behaves, and may only be specified when the ip field is specified. Setting this to "VIP" indicates that traffic is delivered to the node with the destination set to the load-balancer's IP and port. Setting this to "Proxy" indicates that traffic is delivered to the node or pod with the destination set to the node's IP and node port or the pod's IP and port. Service implementations may use this information to adjust traffic routing.
ports
PortStatus array
Ports is a list of records of service ports If used, every port defined in the service should have an entry in it

LoadBalancerStatus v1 core

GroupVersionKind
corev1LoadBalancerStatus

LoadBalancerStatus represents the status of a load-balancer.

FieldDescription
ingress
LoadBalancerIngress array
Ingress is a list containing ingress points for the load-balancer. Traffic intended for the service should be sent to these ingress points.

LocalObjectReference v1 core

GroupVersionKind
corev1LocalObjectReference

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

FieldDescription
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

LocalVolumeSource v1 core

GroupVersionKind
corev1LocalVolumeSource

Local represents directly-attached storage with node affinity (Beta feature)

FieldDescription
fsType
string
fsType is the filesystem type to mount. It applies only when the Path is a block device. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default value is to auto-select a filesystem if unspecified.
path
string
path of the full path to the volume on the node. It can be either a directory or block device (disk, partition, ...).

ManagedFieldsEntry v1 meta

GroupVersionKind
metav1ManagedFieldsEntry

ManagedFieldsEntry is a workflow-id, a FieldSet and the group version of the resource that the fieldset applies to.

Appears In:
FieldDescription
apiVersion
string
APIVersion defines the version of this resource that this field set applies to. The format is "group/version" just like the top-level APIVersion field. It is necessary to track the version of a field set because it cannot be automatically converted.
fieldsType
string
FieldsType is the discriminator for the different fields format and version. There is currently only one possible value: "FieldsV1"
fieldsV1
FieldsV1
FieldsV1 holds the first JSON version format as described in the "FieldsV1" type.
manager
string
Manager is an identifier of the workflow managing these fields.
operation
string
Operation is the type of operation which lead to this ManagedFieldsEntry being created. The only valid values for this field are 'Apply' and 'Update'.
subresource
string
Subresource is the name of the subresource used to update that object, or empty string if the object was updated through the main resource. The value of this field is used to distinguish between managers, even if they share the same name. For example, a status update will be distinct from a regular update using the same manager name. Note that the APIVersion field is not related to the Subresource field and it always corresponds to the version of the main resource.
time
Time
Time is the timestamp of when the ManagedFields entry was added. The timestamp will also be updated if a field is added, the manager changes any of the owned fields value or removes a field. The timestamp does not update when a field is removed from the entry because another manager took it over.

MatchCondition v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1MatchCondition

MatchCondition represents a condition which must by fulfilled for a request to be sent to a webhook.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. Must evaluate to bool. CEL expressions have access to the contents of the AdmissionRequest and Authorizer, organized into CEL variables: 'object' - The object from the incoming request. The value is null for DELETE requests. 'oldObject' - The existing object. The value is null for CREATE requests. 'request' - Attributes of the admission request(/pkg/apis/admission/types.go#AdmissionRequest). 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/ Required.
name
string
Name is an identifier for this match condition, used for strategic merging of MatchConditions, as well as providing an identifier for logging purposes. A good name should be descriptive of the associated expression. Name must be a qualified name consisting of alphanumeric characters, '-', '_' or '.', and must start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc', regex used for validation is '([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]') with an optional DNS subdomain prefix and '/' (e.g. 'example.com/MyName') Required.

MatchResources v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1MatchResources

MatchResources decides whether to run the admission control policy on an object based on whether it meets the match criteria. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
excludeResourceRules
NamedRuleWithOperations array
ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
matchPolicy
string
matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
namespaceSelector
LabelSelector
NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
objectSelector
LabelSelector
ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
resourceRules
NamedRuleWithOperations array
ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

MetricIdentifier v2 autoscaling

GroupVersionKind
autoscalingv2MetricIdentifier

MetricIdentifier defines the name and optionally selector for a metric

FieldDescription
name
string
name is the name of the given metric
selector
LabelSelector
selector is the string-encoded form of a standard kubernetes label selector for the given metric When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping. When unset, just the metricName will be used to gather metrics.

MetricSpec v2 autoscaling

GroupVersionKind
autoscalingv2MetricSpec

MetricSpec specifies how to scale based on a single metric (only `type` and one other matching field should be set at once).

FieldDescription
containerResource
ContainerResourceMetricSource
containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. This is an alpha feature and can be enabled by the HPAContainerMetrics feature flag.
external
ExternalMetricSource
external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
object
ObjectMetricSource
object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
pods
PodsMetricSource
pods refers to a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.
resource
ResourceMetricSource
resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
type
string
type is the type of metric source. It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object. Note: "ContainerResource" type is available on when the feature-gate HPAContainerMetrics is enabled

MetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2MetricStatus

MetricStatus describes the last-read state of a single metric.

FieldDescription
containerResource
ContainerResourceMetricStatus
container resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
external
ExternalMetricStatus
external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
object
ObjectMetricStatus
object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
pods
PodsMetricStatus
pods refers to a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.
resource
ResourceMetricStatus
resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
type
string
type is the type of metric source. It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object. Note: "ContainerResource" type is available on when the feature-gate HPAContainerMetrics is enabled

MetricTarget v2 autoscaling

GroupVersionKind
autoscalingv2MetricTarget

MetricTarget defines the target value, average value, or average utilization of a specific metric

FieldDescription
averageUtilization
integer
averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
averageValue
Quantity
averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
type
string
type represents whether the metric type is Utilization, Value, or AverageValue
value
Quantity
value is the target value of the metric (as a quantity).

MetricValueStatus v2 autoscaling

GroupVersionKind
autoscalingv2MetricValueStatus

MetricValueStatus holds the current value for a metric

FieldDescription
averageUtilization
integer
currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
averageValue
Quantity
averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
value
Quantity
value is the current value of the metric (as a quantity).

MicroTime v1 meta

GroupVersionKind
metav1MicroTime

MicroTime is version of Time with microsecond level precision.

FieldDescription

MigrationCondition v1alpha1 storagemigration.k8s.io

GroupVersionKind
storagemigration.k8s.iov1alpha1MigrationCondition

Describes the state of a migration at a certain point.

FieldDescription
lastUpdateTime
Time
The last time this condition was updated.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of the condition.

ModifyVolumeStatus v1 core

GroupVersionKind
corev1ModifyVolumeStatus

ModifyVolumeStatus represents the status object of ControllerModifyVolume operation

FieldDescription
status
string
status is the status of the ControllerModifyVolume operation. It can be in any of following states: - Pending Pending indicates that the PersistentVolumeClaim cannot be modified due to unmet requirements, such as the specified VolumeAttributesClass not existing. - InProgress InProgress indicates that the volume is being modified. - Infeasible Infeasible indicates that the request has been rejected as invalid by the CSI driver. To resolve the error, a valid VolumeAttributesClass needs to be specified. Note: New statuses can be added in the future. Consumers should check for unknown statuses and fail appropriately.
targetVolumeAttributesClassName
string
targetVolumeAttributesClassName is the name of the VolumeAttributesClass the PVC currently being reconciled

MutatingWebhook v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1MutatingWebhook

MutatingWebhook describes an admission webhook and the resources and operations it applies to.

FieldDescription
admissionReviewVersions
string array
AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
clientConfig
WebhookClientConfig
ClientConfig defines how to communicate with the hook. Required
failurePolicy
string
FailurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
matchConditions
MatchCondition array
patch strategy: merge
patch merge key: name
MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the webhook is skipped. 2. If ALL matchConditions evaluate to TRUE, the webhook is called. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
matchPolicy
string
matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Equivalent"
name
string
The name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where "imagepolicy" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
namespaceSelector
LabelSelector
NamespaceSelector decides whether to run the webhook on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the webhook. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the webhook on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
objectSelector
LabelSelector
ObjectSelector decides whether to run the webhook based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the webhook, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
reinvocationPolicy
string
reinvocationPolicy indicates whether this webhook should be called multiple times as part of a single admission evaluation. Allowed values are "Never" and "IfNeeded". Never: the webhook will not be called more than once in a single admission evaluation. IfNeeded: the webhook will be called at least one additional time as part of the admission evaluation if the object being admitted is modified by other admission plugins after the initial webhook call. Webhooks that specify this option *must* be idempotent, able to process objects they previously admitted. Note: * the number of additional invocations is not guaranteed to be exactly one. * if additional invocations result in further modifications to the object, webhooks are not guaranteed to be invoked again. * webhooks that use this option may be reordered to minimize the number of additional invocations. * to validate an object after all mutations are guaranteed complete, use a validating admission webhook instead. Defaults to "Never".
rules
RuleWithOperations array
Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
sideEffects
string
SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
timeoutSeconds
integer
TimeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.

NFSVolumeSource v1 core

GroupVersionKind
corev1NFSVolumeSource

Represents an NFS mount that lasts the lifetime of a pod. NFS volumes do not support ownership management or SELinux relabeling.

FieldDescription
path
string
path that is exported by the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
readOnly
boolean
readOnly here will force the NFS export to be mounted with read-only permissions. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs
server
string
server is the hostname or IP address of the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

NamedResourcesAllocationResult v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesAllocationResult

NamedResourcesAllocationResult is used in AllocationResultModel.

FieldDescription
name
string
Name is the name of the selected resource instance.

NamedResourcesAttribute v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesAttribute

NamedResourcesAttribute is a combination of an attribute name and its value.

FieldDescription
bool
boolean
BoolValue is a true/false value.
int
integer
IntValue is a 64-bit integer.
intSlice
NamedResourcesIntSlice
IntSliceValue is an array of 64-bit integers.
name
string
Name is unique identifier among all resource instances managed by the driver on the node. It must be a DNS subdomain.
quantity
Quantity
QuantityValue is a quantity.
string
string
StringValue is a string.
stringSlice
NamedResourcesStringSlice
StringSliceValue is an array of strings.
version
string
VersionValue is a semantic version according to semver.org spec 2.0.0.

NamedResourcesFilter v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesFilter

NamedResourcesFilter is used in ResourceFilterModel.

FieldDescription
selector
string
Selector is a CEL expression which must evaluate to true if a resource instance is suitable. The language is as defined in https://kubernetes.io/docs/reference/using-api/cel/ In addition, for each type NamedResourcesin AttributeValue there is a map that resolves to the corresponding value of the instance under evaluation. For example: attributes.quantity["a"].isGreaterThan(quantity("0")) && attributes.stringslice["b"].isSorted()

NamedResourcesInstance v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesInstance

NamedResourcesInstance represents one individual hardware instance that can be selected based on its attributes.

FieldDescription
attributes
NamedResourcesAttribute array
Attributes defines the attributes of this resource instance. The name of each attribute must be unique.
name
string
Name is unique identifier among all resource instances managed by the driver on the node. It must be a DNS subdomain.

NamedResourcesIntSlice v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesIntSlice

NamedResourcesIntSlice contains a slice of 64-bit integers.

FieldDescription
ints
integer array
Ints is the slice of 64-bit integers.

NamedResourcesRequest v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesRequest

NamedResourcesRequest is used in ResourceRequestModel.

FieldDescription
selector
string
Selector is a CEL expression which must evaluate to true if a resource instance is suitable. The language is as defined in https://kubernetes.io/docs/reference/using-api/cel/ In addition, for each type NamedResourcesin AttributeValue there is a map that resolves to the corresponding value of the instance under evaluation. For example: attributes.quantity["a"].isGreaterThan(quantity("0")) && attributes.stringslice["b"].isSorted()

NamedResourcesResources v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesResources

NamedResourcesResources is used in ResourceModel.

FieldDescription
instances
NamedResourcesInstance array
The list of all individual resources instances currently available.

NamedResourcesStringSlice v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2NamedResourcesStringSlice

NamedResourcesStringSlice contains a slice of strings.

FieldDescription
strings
string array
Strings is the slice of strings.

NamedRuleWithOperations v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1NamedRuleWithOperations

NamedRuleWithOperations is a tuple of Operations and Resources with ResourceNames.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
apiGroups
string array
APIGroups is the API groups the resources belong to. '\*' is all groups. If '\*' is present, the length of the slice must be one. Required.
apiVersions
string array
APIVersions is the API versions the resources belong to. '\*' is all versions. If '\*' is present, the length of the slice must be one. Required.
operations
string array
Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '\*' is present, the length of the slice must be one. Required.
resourceNames
string array
ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
resources
string array
Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '\*' means all resources, but not subresources. 'pods/\*' means all subresources of pods. '\*/scale' means all scale subresources. '\*/\*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
scope
string
scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "*" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "*" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NamespaceCondition v1 core

GroupVersionKind
corev1NamespaceCondition

NamespaceCondition contains details about state of namespace.

FieldDescription
lastTransitionTime
Time
message
string
reason
string
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of namespace controller condition.

NetworkPolicyEgressRule v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1NetworkPolicyEgressRule

NetworkPolicyEgressRule describes a particular set of traffic that is allowed out of pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and to. This type is beta-level in 1.8

FieldDescription
ports
NetworkPolicyPort array
ports is a list of destination ports for outgoing traffic. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.
to
NetworkPolicyPeer array
to is a list of destinations for outgoing traffic of pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all destinations (traffic not restricted by destination). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the to list.

NetworkPolicyIngressRule v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1NetworkPolicyIngressRule

NetworkPolicyIngressRule describes a particular set of traffic that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The traffic must match both ports and from.

FieldDescription
from
NetworkPolicyPeer array
from is a list of sources which should be able to access the pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all sources (traffic not restricted by source). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the from list.
ports
NetworkPolicyPort array
ports is a list of ports which should be made accessible on the pods selected for this rule. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.

NetworkPolicyPeer v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1NetworkPolicyPeer

NetworkPolicyPeer describes a peer to allow traffic to/from. Only certain combinations of fields are allowed

FieldDescription
ipBlock
IPBlock
ipBlock defines policy on a particular IPBlock. If this field is set then neither of the other fields can be.
namespaceSelector
LabelSelector
namespaceSelector selects namespaces using cluster-scoped labels. This field follows standard label selector semantics; if present but empty, it selects all namespaces. If podSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the namespaces selected by namespaceSelector. Otherwise it selects all pods in the namespaces selected by namespaceSelector.
podSelector
LabelSelector
podSelector is a label selector which selects pods. This field follows standard label selector semantics; if present but empty, it selects all pods. If namespaceSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects the pods matching podSelector in the policy's own namespace.

NetworkPolicyPort v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1NetworkPolicyPort

NetworkPolicyPort describes a port to allow traffic on

FieldDescription
endPort
integer
endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
portport represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
protocol
string
protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.

NodeAddress v1 core

GroupVersionKind
corev1NodeAddress

NodeAddress contains information for the node's address.

Appears In:
FieldDescription
address
string
The node address.
type
string
Node address type, one of Hostname, ExternalIP or InternalIP.

NodeAffinity v1 core

GroupVersionKind
corev1NodeAffinity

Node affinity is a group of node affinity scheduling rules.

Appears In:
FieldDescription
preferredDuringSchedulingIgnoredDuringExecution
PreferredSchedulingTerm array
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.
requiredDuringSchedulingIgnoredDuringExecution
NodeSelector
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

NodeCondition v1 core

GroupVersionKind
corev1NodeCondition

NodeCondition contains condition information for a node.

Appears In:
FieldDescription
lastHeartbeatTime
Time
Last time we got an update on a given condition.
lastTransitionTime
Time
Last time the condition transit from one status to another.
message
string
Human readable message indicating details about last transition.
reason
string
(brief) reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of node condition.

NodeConfigSource v1 core

GroupVersionKind
corev1NodeConfigSource

NodeConfigSource specifies a source of node configuration. Exactly one subfield (excluding metadata) must be non-nil. This API is deprecated since 1.22

FieldDescription
configMap
ConfigMapNodeConfigSource
ConfigMap is a reference to a Node's ConfigMap

NodeConfigStatus v1 core

GroupVersionKind
corev1NodeConfigStatus

NodeConfigStatus describes the status of the config assigned by Node.Spec.ConfigSource.

Appears In:
FieldDescription
active
NodeConfigSource
Active reports the checkpointed config the node is actively using. Active will represent either the current version of the Assigned config, or the current LastKnownGood config, depending on whether attempting to use the Assigned config results in an error.
assigned
NodeConfigSource
Assigned reports the checkpointed config the node will try to use. When Node.Spec.ConfigSource is updated, the node checkpoints the associated config payload to local disk, along with a record indicating intended config. The node refers to this record to choose its config checkpoint, and reports this record in Assigned. Assigned only updates in the status after the record has been checkpointed to disk. When the Kubelet is restarted, it tries to make the Assigned config the Active config by loading and validating the checkpointed payload identified by Assigned.
error
string
Error describes any problems reconciling the Spec.ConfigSource to the Active config. Errors may occur, for example, attempting to checkpoint Spec.ConfigSource to the local Assigned record, attempting to checkpoint the payload associated with Spec.ConfigSource, attempting to load or validate the Assigned config, etc. Errors may occur at different points while syncing config. Earlier errors (e.g. download or checkpointing errors) will not result in a rollback to LastKnownGood, and may resolve across Kubelet retries. Later errors (e.g. loading or validating a checkpointed config) will result in a rollback to LastKnownGood. In the latter case, it is usually possible to resolve the error by fixing the config assigned in Spec.ConfigSource. You can find additional information for debugging by searching the error message in the Kubelet log. Error is a human-readable description of the error state; machines can check whether or not Error is empty, but should not rely on the stability of the Error text across Kubelet versions.
lastKnownGood
NodeConfigSource
LastKnownGood reports the checkpointed config the node will fall back to when it encounters an error attempting to use the Assigned config. The Assigned config becomes the LastKnownGood config when the node determines that the Assigned config is stable and correct. This is currently implemented as a 10-minute soak period starting when the local record of Assigned config is updated. If the Assigned config is Active at the end of this period, it becomes the LastKnownGood. Note that if Spec.ConfigSource is reset to nil (use local defaults), the LastKnownGood is also immediately reset to nil, because the local default config is always assumed good. You should not make assumptions about the node's method of determining config stability and correctness, as this may change or become configurable in the future.

NodeDaemonEndpoints v1 core

GroupVersionKind
corev1NodeDaemonEndpoints

NodeDaemonEndpoints lists ports opened by daemons running on the Node.

Appears In:
FieldDescription
kubeletEndpoint
DaemonEndpoint
Endpoint on which Kubelet is listening.

NodeRuntimeHandler v1 core

GroupVersionKind
corev1NodeRuntimeHandler

NodeRuntimeHandler is a set of runtime handler information.

Appears In:
FieldDescription
features
NodeRuntimeHandlerFeatures
Supported features.
name
string
Runtime handler name. Empty for the default runtime handler.

NodeRuntimeHandlerFeatures v1 core

GroupVersionKind
corev1NodeRuntimeHandlerFeatures

NodeRuntimeHandlerFeatures is a set of runtime features.

FieldDescription
recursiveReadOnlyMounts
boolean
RecursiveReadOnlyMounts is set to true if the runtime handler supports RecursiveReadOnlyMounts.

NodeSelector v1 core

GroupVersionKind
corev1NodeSelector

A node selector represents the union of the results of one or more label queries over a set of nodes; that is, it represents the OR of the selectors represented by the node selector terms.

FieldDescription
nodeSelectorTerms
NodeSelectorTerm array
Required. A list of node selector terms. The terms are ORed.

NodeSelectorRequirement v1 core

GroupVersionKind
corev1NodeSelectorRequirement

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

FieldDescription
key
string
The label key that the selector applies to.
operator
string
Represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.
values
string array
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

NodeSelectorTerm v1 core

GroupVersionKind
corev1NodeSelectorTerm

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

FieldDescription
matchExpressions
NodeSelectorRequirement array
A list of node selector requirements by node's labels.
matchFields
NodeSelectorRequirement array
A list of node selector requirements by node's fields.

NodeSystemInfo v1 core

GroupVersionKind
corev1NodeSystemInfo

NodeSystemInfo is a set of ids/uuids to uniquely identify the node.

Appears In:
FieldDescription
architecture
string
The Architecture reported by the node
bootID
string
Boot ID reported by the node.
containerRuntimeVersion
string
ContainerRuntime Version reported by the node through runtime remote API (e.g. containerd://1.4.2).
kernelVersion
string
Kernel Version reported by the node from 'uname -r' (e.g. 3.16.0-0.bpo.4-amd64).
kubeProxyVersion
string
KubeProxy Version reported by the node.
kubeletVersion
string
Kubelet Version reported by the node.
machineID
string
MachineID reported by the node. For unique machine identification in the cluster this field is preferred. Learn more from man(5) machine-id: http://man7.org/linux/man-pages/man5/machine-id.5.html
operatingSystem
string
The Operating System reported by the node
osImage
string
OS Image reported by the node from /etc/os-release (e.g. Debian GNU/Linux 7 (wheezy)).
systemUUID
string
SystemUUID reported by the node. For unique machine identification MachineID is preferred. This field is specific to Red Hat hosts https://access.redhat.com/documentation/en-us/red_hat_subscription_management/1/html/rhsm/uuid

NonResourceAttributes v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1NonResourceAttributes

NonResourceAttributes includes the authorization attributes available for non-resource requests to the Authorizer interface

FieldDescription
path
string
Path is the URL path of the request
verb
string
Verb is the standard HTTP verb

NonResourcePolicyRule v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1NonResourcePolicyRule

NonResourcePolicyRule is a predicate that matches non-resource requests according to their verb and the target non-resource URL. A NonResourcePolicyRule matches a request if and only if both (a) at least one member of verbs matches the request and (b) at least one member of nonResourceURLs matches the request.

Other API versions of this object exist: v1beta3
FieldDescription
nonResourceURLs
string array
`nonResourceURLs` is a set of url prefixes that a user should have access to and may not be empty. For example: - "/healthz" is legal - "/hea*" is illegal - "/hea" is legal but matches nothing - "/hea/*" also matches nothing - "/healthz/*" matches all per-component health checks. "*" matches all non-resource urls. if it is present, it must be the only entry. Required.
verbs
string array
`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs. If it is present, it must be the only entry. Required.

NonResourceRule v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1NonResourceRule

NonResourceRule holds information that describes a rule for the non-resource

FieldDescription
nonResourceURLs
string array
NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path. "*" means all.
verbs
string array
Verb is a list of kubernetes non-resource API verbs, like: get, post, put, delete, patch, head, options. "*" means all.

ObjectFieldSelector v1 core

GroupVersionKind
corev1ObjectFieldSelector

ObjectFieldSelector selects an APIVersioned field of an object.

FieldDescription
apiVersion
string
Version of the schema the FieldPath is written in terms of, defaults to "v1".
fieldPath
string
Path of the field to select in the specified API version.

ObjectMeta v1 meta

GroupVersionKind
metav1ObjectMeta

ObjectMeta is metadata that all persisted resources must have, which includes all objects users must create.

Appears In:
FieldDescription
annotations
object
Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata. They are not queryable and should be preserved when modifying objects. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations
creationTimestamp
Time
CreationTimestamp is a timestamp representing the server time when this object was created. It is not guaranteed to be set in happens-before order across separate operations. Clients may not set this value. It is represented in RFC3339 form and is in UTC. Populated by the system. Read-only. Null for lists. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
deletionGracePeriodSeconds
integer
Number of seconds allowed for this object to gracefully terminate before it will be removed from the system. Only set when deletionTimestamp is also set. May only be shortened. Read-only.
deletionTimestamp
Time
DeletionTimestamp is RFC 3339 date and time at which this resource will be deleted. This field is set by the server when a graceful deletion is requested by the user, and is not directly settable by a client. The resource is expected to be deleted (no longer visible from resource lists, and not reachable by name) after the time in this field, once the finalizers list is empty. As long as the finalizers list contains items, deletion is blocked. Once the deletionTimestamp is set, this value may not be unset or be set further into the future, although it may be shortened or the resource may be deleted prior to this time. For example, a user may request that a pod is deleted in 30 seconds. The Kubelet will react by sending a graceful termination signal to the containers in the pod. After that 30 seconds, the Kubelet will send a hard termination signal (SIGKILL) to the container and after cleanup, remove the pod from the API. In the presence of network partitions, this object may still exist after this timestamp, until an administrator or automated process can determine the resource is fully terminated. If not set, graceful deletion of the object has not been requested. Populated by the system when a graceful deletion is requested. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
finalizers
string array
patch strategy: merge
Must be empty before the object is deleted from the registry. Each entry is an identifier for the responsible component that will remove the entry from the list. If the deletionTimestamp of the object is non-nil, entries in this list can only be removed. Finalizers may be processed and removed in any order. Order is NOT enforced because it introduces significant risk of stuck finalizers. finalizers is a shared field, any actor with permission can reorder it. If the finalizer list is processed in order, then this can lead to a situation in which the component responsible for the first finalizer in the list is waiting for a signal (field value, external system, or other) produced by a component responsible for a finalizer later in the list, resulting in a deadlock. Without enforced ordering finalizers are free to order amongst themselves and are not vulnerable to ordering changes in the list.
generateName
string
GenerateName is an optional prefix, used by the server, to generate a unique name ONLY IF the Name field has not been provided. If this field is used, the name returned to the client will be different than the name passed. This value will also be combined with a unique suffix. The provided value has the same validation rules as the Name field, and may be truncated by the length of the suffix required to make the value unique on the server. If this field is specified and the generated name exists, the server will return a 409. Applied only if Name is not specified. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#idempotency
generation
integer
A sequence number representing a specific generation of the desired state. Populated by the system. Read-only.
labels
object
Map of string keys and values that can be used to organize and categorize (scope and select) objects. May match selectors of replication controllers and services. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels
managedFields
ManagedFieldsEntry array
ManagedFields maps workflow-id and version to the set of fields that are managed by that workflow. This is mostly for internal housekeeping, and users typically shouldn't need to set or understand this field. A workflow can be the user's name, a controller's name, or the name of a specific apply path like "ci-cd". The set of fields is always in the version that the workflow used when modifying the object.
name
string
Name must be unique within a namespace. Is required when creating resources, although some resources may allow a client to request the generation of an appropriate name automatically. Name is primarily intended for creation idempotence and configuration definition. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#names
namespace
string
Namespace defines the space within which each name must be unique. An empty namespace is equivalent to the "default" namespace, but "default" is the canonical representation. Not all objects are required to be scoped to a namespace - the value of this field for those objects will be empty. Must be a DNS_LABEL. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces
ownerReferences
OwnerReference array
patch strategy: merge
patch merge key: uid
List of objects depended by this object. If ALL objects in the list have been deleted, this object will be garbage collected. If this object is managed by a controller, then an entry in this list will point to this controller, with the controller field set to true. There cannot be more than one managing controller.
resourceVersion
string
An opaque value that represents the internal version of this object that can be used by clients to determine when objects have changed. May be used for optimistic concurrency, change detection, and the watch operation on a resource or set of resources. Clients must treat these values as opaque and passed unmodified back to the server. They may only be valid for a particular resource or set of resources. Populated by the system. Read-only. Value must be treated as opaque by clients and . More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
selfLink
string
Deprecated: selfLink is a legacy read-only field that is no longer populated by the system.
uid
string
UID is the unique in time and space value for this object. It is typically generated by the server on successful creation of a resource and is not allowed to change on PUT operations. Populated by the system. Read-only. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

ObjectMetricSource v2 autoscaling

GroupVersionKind
autoscalingv2ObjectMetricSource

ObjectMetricSource indicates how to scale on a metric describing a kubernetes object (for example, hits-per-second on an Ingress object).

FieldDescription
describedObject
CrossVersionObjectReference
describedObject specifies the descriptions of a object,such as kind,name apiVersion
metric
MetricIdentifier
metric identifies the target metric by name and selector
target
MetricTarget
target specifies the target value for the given metric

ObjectMetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2ObjectMetricStatus

ObjectMetricStatus indicates the current value of a metric describing a kubernetes object (for example, hits-per-second on an Ingress object).

FieldDescription
current
MetricValueStatus
current contains the current value for the given metric
describedObject
CrossVersionObjectReference
DescribedObject specifies the descriptions of a object,such as kind,name apiVersion
metric
MetricIdentifier
metric identifies the target metric by name and selector

ObjectReference v1 core

GroupVersionKind
corev1ObjectReference

ObjectReference contains enough information to let you inspect or modify the referred object.

FieldDescription
apiVersion
string
API version of the referent.
fieldPath
string
If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object.
kind
string
Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
namespace
string
Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/
resourceVersion
string
Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency
uid
string
UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids

Overhead v1 node.k8s.io

GroupVersionKind
node.k8s.iov1Overhead

Overhead structure represents the resource overhead associated with running a pod.

FieldDescription
podFixed
object
podFixed represents the fixed resource overhead associated with running a pod.

OwnerReference v1 meta

GroupVersionKind
metav1OwnerReference

OwnerReference contains enough information to let you identify an owning object. An owning object must be in the same namespace as the dependent, or be cluster-scoped, so there is no namespace field.

Appears In:
FieldDescription
apiVersion
string
API version of the referent.
blockOwnerDeletion
boolean
If true, AND if the owner has the "foregroundDeletion" finalizer, then the owner cannot be deleted from the key-value store until this reference is removed. See https://kubernetes.io/docs/concepts/architecture/garbage-collection/#foreground-deletion for how the garbage collector interacts with this field and enforces the foreground deletion. Defaults to false. To set this field, a user needs "delete" permission of the owner, otherwise 422 (Unprocessable Entity) will be returned.
controller
boolean
If true, this reference points to the managing controller.
kind
string
Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#names
uid
string
UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

ParamKind v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ParamKind

ParamKind is a tuple of Group Kind and Version.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
apiVersion
string
APIVersion is the API group version the resources belong to. In format of "group/version". Required.
kind
string
Kind is the API kind the resources belong to. Required.

ParamRef v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ParamRef

ParamRef describes how to locate the params to be used as input to expressions of rules applied by a policy binding.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
name
string
name is the name of the resource being referenced. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset. A single parameter used for all admission requests can be configured by setting the `name` field, leaving `selector` blank, and setting namespace if `paramKind` is namespace-scoped.
namespace
string
namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
parameterNotFoundAction
string
`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Required
selector
LabelSelector
selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

ParentReference v1alpha1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1alpha1ParentReference

ParentReference describes a reference to a parent object.

FieldDescription
group
string
Group is the group of the object being referenced.
name
string
Name is the name of the object being referenced.
namespace
string
Namespace is the namespace of the object being referenced.
resource
string
Resource is the resource of the object being referenced.

Patch v1 meta

GroupVersionKind
metav1Patch

Patch is provided to give a concrete name and type to the Kubernetes PATCH request body.

FieldDescription

PersistentVolumeClaimCondition v1 core

GroupVersionKind
corev1PersistentVolumeClaimCondition

PersistentVolumeClaimCondition contains details about state of pvc

FieldDescription
lastProbeTime
Time
lastProbeTime is the time we probed the condition.
lastTransitionTime
Time
lastTransitionTime is the time the condition transitioned from one status to another.
message
string
message is the human-readable message indicating details about last transition.
reason
string
reason is a unique, this should be a short, machine understandable string that gives the reason for condition's last transition. If it reports "Resizing" that means the underlying persistent volume is being resized.
status
string
type
string

PersistentVolumeClaimTemplate v1 core

GroupVersionKind
corev1PersistentVolumeClaimTemplate

PersistentVolumeClaimTemplate is used to produce PersistentVolumeClaim objects as part of an EphemeralVolumeSource.

FieldDescription
metadata
ObjectMeta
May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.
spec
PersistentVolumeClaimSpec
The specification for the PersistentVolumeClaim. The entire content is copied unchanged into the PVC that gets created from this template. The same fields as in a PersistentVolumeClaim are also valid here.

PersistentVolumeClaimVolumeSource v1 core

GroupVersionKind
corev1PersistentVolumeClaimVolumeSource

PersistentVolumeClaimVolumeSource references the user's PVC in the same namespace. This volume finds the bound PV and mounts that volume for the pod. A PersistentVolumeClaimVolumeSource is, essentially, a wrapper around another type of volume that is owned by someone else (the system).

Appears In:
FieldDescription
claimName
string
claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims
readOnly
boolean
readOnly Will force the ReadOnly setting in VolumeMounts. Default false.

PhotonPersistentDiskVolumeSource v1 core

GroupVersionKind
corev1PhotonPersistentDiskVolumeSource

Represents a Photon Controller persistent disk resource.

FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
pdID
string
pdID is the ID that identifies Photon Controller persistent disk

PodAffinity v1 core

GroupVersionKind
corev1PodAffinity

Pod affinity is a group of inter pod affinity scheduling rules.

Appears In:
FieldDescription
preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm array
The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm array
If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

PodAffinityTerm v1 core

GroupVersionKind
corev1PodAffinityTerm

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

FieldDescription
labelSelector
LabelSelector
A label query over a set of resources, in this case pods. If it's null, this PodAffinityTerm matches with no Pods.
matchLabelKeys
string array
MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn't set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.
mismatchLabelKeys
string array
MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn't set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.
namespaceSelector
LabelSelector
A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod's namespace". An empty selector ({}) matches all namespaces.
namespaces
string array
namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod's namespace".
topologyKey
string
This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

PodAntiAffinity v1 core

GroupVersionKind
corev1PodAntiAffinity

Pod anti affinity is a group of inter pod anti affinity scheduling rules.

Appears In:
FieldDescription
preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm array
The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.
requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm array
If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

PodCondition v1 core

GroupVersionKind
corev1PodCondition

PodCondition contains details for the current condition of this pod.

Appears In:
FieldDescription
lastProbeTime
Time
Last time we probed the condition.
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
message
string
Human-readable message indicating details about last transition.
reason
string
Unique, one-word, CamelCase reason for the condition's last transition.
status
string
Status is the status of the condition. Can be True, False, Unknown. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
type
string
Type is the type of the condition. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions

PodDNSConfig v1 core

GroupVersionKind
corev1PodDNSConfig

PodDNSConfig defines the DNS parameters of a pod in addition to those generated from DNSPolicy.

Appears In:
FieldDescription
nameservers
string array
A list of DNS name server IP addresses. This will be appended to the base nameservers generated from DNSPolicy. Duplicated nameservers will be removed.
options
PodDNSConfigOption array
A list of DNS resolver options. This will be merged with the base options generated from DNSPolicy. Duplicated entries will be removed. Resolution options given in Options will override those that appear in the base DNSPolicy.
searches
string array
A list of DNS search domains for host-name lookup. This will be appended to the base search paths generated from DNSPolicy. Duplicated search paths will be removed.

PodDNSConfigOption v1 core

GroupVersionKind
corev1PodDNSConfigOption

PodDNSConfigOption defines DNS resolver options of a pod.

FieldDescription
name
string
Required.
value
string

PodFailurePolicy v1 batch

GroupVersionKind
batchv1PodFailurePolicy

PodFailurePolicy describes how failed pods influence the backoffLimit.

Appears In:
FieldDescription
rules
PodFailurePolicyRule array
A list of pod failure policy rules. The rules are evaluated in order. Once a rule matches a Pod failure, the remaining of the rules are ignored. When no rule matches the Pod failure, the default handling applies - the counter of pod failures is incremented and it is checked against the backoffLimit. At most 20 elements are allowed.

PodFailurePolicyOnExitCodesRequirement v1 batch

GroupVersionKind
batchv1PodFailurePolicyOnExitCodesRequirement

PodFailurePolicyOnExitCodesRequirement describes the requirement for handling a failed pod based on its container exit codes. In particular, it lookups the .state.terminated.exitCode for each app container and init container status, represented by the .status.containerStatuses and .status.initContainerStatuses fields in the Pod status, respectively. Containers completed with success (exit code 0) are excluded from the requirement check.

FieldDescription
containerName
string
Restricts the check for exit codes to the container with the specified name. When null, the rule applies to all containers. When specified, it should match one the container or initContainer names in the pod template.
operator
string
Represents the relationship between the container exit code(s) and the specified values. Containers completed with success (exit code 0) are excluded from the requirement check. Possible values are: - In: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is in the set of specified values. - NotIn: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is not in the set of specified values. Additional values are considered to be added in the future. Clients should react to an unknown operator by assuming the requirement is not satisfied.
values
integer array
Specifies the set of values. Each returned container exit code (might be multiple in case of multiple containers) is checked against this set of values with respect to the operator. The list of values must be ordered and must not contain duplicates. Value '0' cannot be used for the In operator. At least one element is required. At most 255 elements are allowed.

PodFailurePolicyOnPodConditionsPattern v1 batch

GroupVersionKind
batchv1PodFailurePolicyOnPodConditionsPattern

PodFailurePolicyOnPodConditionsPattern describes a pattern for matching an actual pod condition type.

FieldDescription
status
string
Specifies the required Pod condition status. To match a pod condition it is required that the specified status equals the pod condition status. Defaults to True.
type
string
Specifies the required Pod condition type. To match a pod condition it is required that specified type equals the pod condition type.

PodFailurePolicyRule v1 batch

GroupVersionKind
batchv1PodFailurePolicyRule

PodFailurePolicyRule describes how a pod failure is handled when the requirements are met. One of onExitCodes and onPodConditions, but not both, can be used in each rule.

FieldDescription
action
string
Specifies the action taken on a pod failure when the requirements are satisfied. Possible values are: - FailJob: indicates that the pod's job is marked as Failed and all running pods are terminated. - FailIndex: indicates that the pod's index is marked as Failed and will not be restarted. This value is beta-level. It can be used when the `JobBackoffLimitPerIndex` feature gate is enabled (enabled by default). - Ignore: indicates that the counter towards the .backoffLimit is not incremented and a replacement pod is created. - Count: indicates that the pod is handled in the default way - the counter towards the .backoffLimit is incremented. Additional values are considered to be added in the future. Clients should react to an unknown action by skipping the rule.
onExitCodes
PodFailurePolicyOnExitCodesRequirement
Represents the requirement on the container exit codes.
onPodConditions
PodFailurePolicyOnPodConditionsPattern array
Represents the requirement on the pod conditions. The requirement is represented as a list of pod condition patterns. The requirement is satisfied if at least one pattern matches an actual pod condition. At most 20 elements are allowed.

PodIP v1 core

GroupVersionKind
corev1PodIP

PodIP represents a single IP address allocated to the pod.

Appears In:
FieldDescription
ip
string
IP is the IP address assigned to the pod

PodOS v1 core

GroupVersionKind
corev1PodOS

PodOS defines the OS parameters of a pod.

Appears In:
FieldDescription
name
string
Name is the name of the operating system. The currently supported values are linux and windows. Additional value may be defined in future and can be one of: https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration Clients should expect to handle additional values and treat unrecognized values in this field as os: null

PodReadinessGate v1 core

GroupVersionKind
corev1PodReadinessGate

PodReadinessGate contains the reference to a pod condition

Appears In:
FieldDescription
conditionType
string
ConditionType refers to a condition in the pod's condition list with matching type.

PodResourceClaim v1 core

GroupVersionKind
corev1PodResourceClaim

PodResourceClaim references exactly one ResourceClaim through a ClaimSource. It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. Containers that need access to the ResourceClaim reference it with this name.

Appears In:
FieldDescription
name
string
Name uniquely identifies this resource claim inside the pod. This must be a DNS_LABEL.
source
ClaimSource
Source describes where to find the ResourceClaim.

PodSchedulingGate v1 core

GroupVersionKind
corev1PodSchedulingGate

PodSchedulingGate is associated to a Pod to guard its scheduling.

Appears In:
FieldDescription
name
string
Name of the scheduling gate. Each scheduling gate must have a unique name field.

PodSecurityContext v1 core

GroupVersionKind
corev1PodSecurityContext

PodSecurityContext holds pod-level security attributes and common container settings. Some fields are also present in container.securityContext. Field values of container.securityContext take precedence over field values of PodSecurityContext.

Appears In:
FieldDescription
appArmorProfile
AppArmorProfile
appArmorProfile is the AppArmor options to use by the containers in this pod. Note that this field cannot be set when spec.os.name is windows.
fsGroup
integer
A special supplemental group that applies to all containers in a pod. Some volume types allow the Kubelet to change the ownership of that volume to be owned by the pod: 1. The owning GID will be the FSGroup 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) 3. The permission bits are OR'd with rw-rw---- If unset, the Kubelet will not modify the ownership and permissions of any volume. Note that this field cannot be set when spec.os.name is windows.
fsGroupChangePolicy
string
fsGroupChangePolicy defines behavior of changing ownership and permission of the volume before being exposed inside Pod. This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir. Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. Note that this field cannot be set when spec.os.name is windows.
runAsGroup
integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot
boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser
integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions
SELinuxOptions
The SELinux context to be applied to all containers. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.
seccompProfile
SeccompProfile
The seccomp options to use by the containers in this pod. Note that this field cannot be set when spec.os.name is windows.
supplementalGroups
integer array
A list of groups applied to the first process run in each container, in addition to the container's primary GID, the fsGroup (if specified), and group memberships defined in the container image for the uid of the container process. If unspecified, no additional groups are added to any container. Note that group memberships defined in the container image for the uid of the container process are still effective, even if they are not included in this list. Note that this field cannot be set when spec.os.name is windows.
sysctls
Sysctl array
Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported sysctls (by the container runtime) might fail to launch. Note that this field cannot be set when spec.os.name is windows.
windowsOptions
WindowsSecurityContextOptions
The Windows specific settings applied to all containers. If unspecified, the options within a container's SecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.

PodsMetricSource v2 autoscaling

GroupVersionKind
autoscalingv2PodsMetricSource

PodsMetricSource indicates how to scale on a metric describing each pod in the current scale target (for example, transactions-processed-per-second). The values will be averaged together before being compared to the target value.

FieldDescription
metric
MetricIdentifier
metric identifies the target metric by name and selector
target
MetricTarget
target specifies the target value for the given metric

PodsMetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2PodsMetricStatus

PodsMetricStatus indicates the current value of a metric describing each pod in the current scale target (for example, transactions-processed-per-second).

FieldDescription
current
MetricValueStatus
current contains the current value for the given metric
metric
MetricIdentifier
metric identifies the target metric by name and selector

PolicyRule v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1PolicyRule

PolicyRule holds information that describes a policy rule, but does not contain information about who the rule applies to or which namespace the rule applies to.

FieldDescription
apiGroups
string array
APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "" represents the core API group and "*" represents all API groups.
nonResourceURLs
string array
NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path Since non-resource URLs are not namespaced, this field is only applicable for ClusterRoles referenced from a ClusterRoleBinding. Rules can either apply to API resources (such as "pods" or "secrets") or non-resource URL paths (such as "/api"), but not both.
resourceNames
string array
ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
resources
string array
Resources is a list of resources this rule applies to. '\*' represents all resources.
verbs
string array
Verbs is a list of Verbs that apply to ALL the ResourceKinds contained in this rule. '\*' represents all verbs.

PolicyRulesWithSubjects v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1PolicyRulesWithSubjects

PolicyRulesWithSubjects prescribes a test that applies to a request to an apiserver. The test considers the subject making the request, the verb being requested, and the resource to be acted upon. This PolicyRulesWithSubjects matches a request if and only if both (a) at least one member of subjects matches the request and (b) at least one member of resourceRules or nonResourceRules matches the request.

Other API versions of this object exist: v1beta3
FieldDescription
nonResourceRules
NonResourcePolicyRule array
`nonResourceRules` is a list of NonResourcePolicyRules that identify matching requests according to their verb and the target non-resource URL.
resourceRules
ResourcePolicyRule array
`resourceRules` is a slice of ResourcePolicyRules that identify matching requests according to their verb and the target resource. At least one of `resourceRules` and `nonResourceRules` has to be non-empty.
subjects
Subject array
subjects is the list of normal user, serviceaccount, or group that this rule cares about. There must be at least one member in this slice. A slice that includes both the system:authenticated and system:unauthenticated user groups matches every request. Required.

PortStatus v1 core

GroupVersionKind
corev1PortStatus

FieldDescription
error
string
Error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names - cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
port
integer
Port is the port number of the service port of which status is recorded here
protocol
string
Protocol is the protocol of the service port of which status is recorded here The supported values are: "TCP", "UDP", "SCTP"

PortworxVolumeSource v1 core

GroupVersionKind
corev1PortworxVolumeSource

PortworxVolumeSource represents a Portworx volume resource.

FieldDescription
fsType
string
fSType represents the filesystem type to mount Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified.
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
volumeID
string
volumeID uniquely identifies a Portworx volume

Preconditions v1 meta

GroupVersionKind
metav1Preconditions

Preconditions must be fulfilled before an operation (update, delete, etc.) is carried out.

FieldDescription
resourceVersion
string
Specifies the target ResourceVersion
uid
string
Specifies the target UID.

PreferredSchedulingTerm v1 core

GroupVersionKind
corev1PreferredSchedulingTerm

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

FieldDescription
preference
NodeSelectorTerm
A node selector term, associated with the corresponding weight.
weight
integer
Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

PriorityLevelConfigurationCondition v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1PriorityLevelConfigurationCondition

PriorityLevelConfigurationCondition defines the condition of priority level.

Other API versions of this object exist: v1beta3
FieldDescription
lastTransitionTime
Time
`lastTransitionTime` is the last time the condition transitioned from one status to another.
message
string
`message` is a human-readable message indicating details about last transition.
reason
string
`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
status
string
`status` is the status of the condition. Can be True, False, Unknown. Required.
type
string
`type` is the type of the condition. Required.

PriorityLevelConfigurationReference v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1PriorityLevelConfigurationReference

PriorityLevelConfigurationReference contains information that points to the "request-priority" being used.

Other API versions of this object exist: v1beta3
FieldDescription
name
string
`name` is the name of the priority level configuration being referenced Required.

Probe v1 core

GroupVersionKind
corev1Probe

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

FieldDescription
exec
ExecAction
Exec specifies the action to take.
failureThreshold
integer
Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.
grpc
GRPCAction
GRPC specifies an action involving a GRPC port.
httpGet
HTTPGetAction
HTTPGet specifies the http request to perform.
initialDelaySeconds
integer
Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes
periodSeconds
integer
How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
successThreshold
integer
Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.
tcpSocket
TCPSocketAction
TCPSocket specifies an action involving a TCP port.
terminationGracePeriodSeconds
integer
Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.
timeoutSeconds
integer
Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

ProjectedVolumeSource v1 core

GroupVersionKind
corev1ProjectedVolumeSource

Represents a projected volume source

Appears In:
FieldDescription
defaultMode
integer
defaultMode are the mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
sources
VolumeProjection array
sources is the list of volume projections

Quantity resource core

GroupVersionKind
coreresourceQuantity

Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors. The serialization format is: ``` <quantity> ::= <signedNumber><suffix> (Note that <suffix> may be empty, from the "" case in <decimalSI>.) <digit> ::= 0 | 1 | ... | 9 <digits> ::= <digit> | <digit><digits> <number> ::= <digits> | <digits>.<digits> | <digits>. | .<digits> <sign> ::= "+" | "-" <signedNumber> ::= <number> | <sign><number> <suffix> ::= <binarySI> | <decimalExponent> | <decimalSI> <binarySI> ::= Ki | Mi | Gi | Ti | Pi | Ei (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html) <decimalSI> ::= m | "" | k | M | G | T | P | E (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.) <decimalExponent> ::= "e" <signedNumber> | "E" <signedNumber> ``` No matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities. When a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized. Before serializing, Quantity will be put in "canonical form". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that: - No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible. The sign will be omitted unless the number is negative. Examples: - 1.5 will be serialized as "1500m" - 1.5Gi will be serialized as "1536Mi" Note that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise. Non-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.) This format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.

FieldDescription

QueuingConfiguration v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1QueuingConfiguration

QueuingConfiguration holds the configuration parameters for queuing

Other API versions of this object exist: v1beta3
FieldDescription
handSize
integer
`handSize` is a small positive number that configures the shuffle sharding of requests into queues. When enqueuing a request at this priority level the request's flow identifier (a string pair) is hashed and the hash value is used to shuffle the list of queues and deal a hand of the size specified here. The request is put into one of the shortest queues in that hand. `handSize` must be no larger than `queues`, and should be significantly smaller (so that a few heavy flows do not saturate most of the queues). See the user-facing documentation for more extensive guidance on setting this field. This field has a default value of 8.
queueLengthLimit
integer
`queueLengthLimit` is the maximum number of requests allowed to be waiting in a given queue of this priority level at a time; excess requests are rejected. This value must be positive. If not specified, it will be defaulted to 50.
queues
integer
`queues` is the number of queues for this priority level. The queues exist independently at each apiserver. The value must be positive. Setting it to 1 effectively precludes shufflesharding and thus makes the distinguisher method of associated flow schemas irrelevant. This field has a default value of 64.

QuobyteVolumeSource v1 core

GroupVersionKind
corev1QuobyteVolumeSource

Represents a Quobyte mount that lasts the lifetime of a pod. Quobyte volumes do not support ownership management or SELinux relabeling.

FieldDescription
group
string
group to map volume access to Default is no group
readOnly
boolean
readOnly here will force the Quobyte volume to be mounted with read-only permissions. Defaults to false.
registry
string
registry represents a single or multiple Quobyte Registry services specified as a string as host:port pair (multiple entries are separated with commas) which acts as the central registry for volumes
tenant
string
tenant owning the given Quobyte volume in the Backend Used with dynamically provisioned Quobyte volumes, value is set by the plugin
user
string
user to map volume access to Defaults to serivceaccount user
volume
string
volume is a string that references an already created Quobyte volume by name.

RBDPersistentVolumeSource v1 core

GroupVersionKind
corev1RBDPersistentVolumeSource

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

FieldDescription
fsType
string
fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
image
string
image is the rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
keyring
string
keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
monitors
string array
monitors is a collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
pool
string
pool is the rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
readOnly
boolean
readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
secretRef
SecretReference
secretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
user
string
user is the rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

RBDVolumeSource v1 core

GroupVersionKind
corev1RBDVolumeSource

Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
fsType
string
fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
image
string
image is the rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
keyring
string
keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
monitors
string array
monitors is a collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
pool
string
pool is the rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
readOnly
boolean
readOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
secretRef
LocalObjectReference
secretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it
user
string
user is the rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it

ReplicaSetCondition v1 apps

GroupVersionKind
appsv1ReplicaSetCondition

ReplicaSetCondition describes the state of a replica set at a certain point.

FieldDescription
lastTransitionTime
Time
The last time the condition transitioned from one status to another.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of replica set condition.

ReplicationControllerCondition v1 core

GroupVersionKind
corev1ReplicationControllerCondition

ReplicationControllerCondition describes the state of a replication controller at a certain point.

FieldDescription
lastTransitionTime
Time
The last time the condition transitioned from one status to another.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of replication controller condition.

ResourceAttributes v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1ResourceAttributes

ResourceAttributes includes the authorization attributes available for resource requests to the Authorizer interface

FieldDescription
group
string
Group is the API Group of the Resource. "*" means all.
name
string
Name is the name of the resource being requested for a "get" or deleted for a "delete". "" (empty) means all.
namespace
string
Namespace is the namespace of the action being requested. Currently, there is no distinction between no namespace and all namespaces "" (empty) is defaulted for LocalSubjectAccessReviews "" (empty) is empty for cluster-scoped resources "" (empty) means "all" for namespace scoped resources from a SubjectAccessReview or SelfSubjectAccessReview
resource
string
Resource is one of the existing resource types. "*" means all.
subresource
string
Subresource is one of the existing resource types. "" means none.
verb
string
Verb is a kubernetes resource API verb, like: get, list, watch, create, update, delete, proxy. "*" means all.
version
string
Version is the API Version of the Resource. "*" means all.

ResourceClaim v1 core

GroupVersionKind
corev1ResourceClaim

ResourceClaim references one entry in PodSpec.ResourceClaims.

Other API versions of this object exist: v1alpha2
FieldDescription
name
string
Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

ResourceClaimConsumerReference v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaimConsumerReference

ResourceClaimConsumerReference contains enough information to let you locate the consumer of a ResourceClaim. The user must be a resource in the same namespace as the ResourceClaim.

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced. It is empty for the core API. This matches the group in the APIVersion that is used when creating the resources.
name
string
Name is the name of resource being referenced.
resource
string
Resource is the type of resource being referenced, for example "pods".
uid
string
UID identifies exactly one incarnation of the resource.

ResourceClaimParametersReference v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaimParametersReference

ResourceClaimParametersReference contains enough information to let you locate the parameters for a ResourceClaim. The object must be in the same namespace as the ResourceClaim.

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced. It is empty for the core API. This matches the group in the APIVersion that is used when creating the resources.
kind
string
Kind is the type of resource being referenced. This is the same value as in the parameter object's metadata, for example "ConfigMap".
name
string
Name is the name of resource being referenced.

ResourceClaimSchedulingStatus v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaimSchedulingStatus

ResourceClaimSchedulingStatus contains information about one particular ResourceClaim with "WaitForFirstConsumer" allocation mode.

FieldDescription
name
string
Name matches the pod.spec.resourceClaims[*].Name field.
unsuitableNodes
string array
UnsuitableNodes lists nodes that the ResourceClaim cannot be allocated for. The size of this field is limited to 128, the same as for PodSchedulingSpec.PotentialNodes. This may get increased in the future, but not reduced.

ResourceClassParametersReference v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClassParametersReference

ResourceClassParametersReference contains enough information to let you locate the parameters for a ResourceClass.

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced. It is empty for the core API. This matches the group in the APIVersion that is used when creating the resources.
kind
string
Kind is the type of resource being referenced. This is the same value as in the parameter object's metadata.
name
string
Name is the name of resource being referenced.
namespace
string
Namespace that contains the referenced resource. Must be empty for cluster-scoped resources and non-empty for namespaced resources.

ResourceFieldSelector v1 core

GroupVersionKind
corev1ResourceFieldSelector

ResourceFieldSelector represents container resources (cpu, memory) and their output format

FieldDescription
containerName
string
Container name: required for volumes, optional for env vars
divisor
Quantity
Specifies the output format of the exposed resources, defaults to "1"
resource
string
Required: resource to select

ResourceFilter v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceFilter

ResourceFilter is a filter for resources from one particular driver.

FieldDescription
driverName
string
DriverName is the name used by the DRA driver kubelet plugin.
namedResources
NamedResourcesFilter
NamedResources describes a resource filter using the named resources model.

ResourceHandle v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceHandle

ResourceHandle holds opaque resource data for processing by a specific kubelet plugin.

FieldDescription
data
string
Data contains the opaque data associated with this ResourceHandle. It is set by the controller component of the resource driver whose name matches the DriverName set in the ResourceClaimStatus this ResourceHandle is embedded in. It is set at allocation time and is intended for processing by the kubelet plugin whose name matches the DriverName set in this ResourceHandle. The maximum size of this field is 16KiB. This may get increased in the future, but not reduced.
driverName
string
DriverName specifies the name of the resource driver whose kubelet plugin should be invoked to process this ResourceHandle's data once it lands on a node. This may differ from the DriverName set in ResourceClaimStatus this ResourceHandle is embedded in.
structuredData
StructuredResourceHandle
If StructuredData is set, then it needs to be used instead of Data.

ResourceMetricSource v2 autoscaling

GroupVersionKind
autoscalingv2ResourceMetricSource

ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.

FieldDescription
name
string
name is the name of the resource in question.
target
MetricTarget
target specifies the target value for the given metric

ResourceMetricStatus v2 autoscaling

GroupVersionKind
autoscalingv2ResourceMetricStatus

ResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.

FieldDescription
current
MetricValueStatus
current contains the current value for the given metric
name
string
name is the name of the resource in question.

ResourcePolicyRule v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1ResourcePolicyRule

ResourcePolicyRule is a predicate that matches some resource requests, testing the request's verb and the target resource. A ResourcePolicyRule matches a resource request if and only if: (a) at least one member of verbs matches the request, (b) at least one member of apiGroups matches the request, (c) at least one member of resources matches the request, and (d) either (d1) the request does not specify a namespace (i.e., `Namespace==""`) and clusterScope is true or (d2) the request specifies a namespace and least one member of namespaces matches the request's namespace.

Other API versions of this object exist: v1beta3
FieldDescription
apiGroups
string array
`apiGroups` is a list of matching API groups and may not be empty. "*" matches all API groups and, if present, must be the only entry. Required.
clusterScope
boolean
`clusterScope` indicates whether to match requests that do not specify a namespace (which happens either because the resource is not namespaced or the request targets all namespaces). If this field is omitted or false then the `namespaces` field must contain a non-empty list.
namespaces
string array
`namespaces` is a list of target namespaces that restricts matches. A request that specifies a target namespace matches only if either (a) this list contains that target namespace or (b) this list contains "*". Note that "*" matches any specified namespace but does not match a request that _does not specify_ a namespace (see the `clusterScope` field for that). This list may be empty, but only if `clusterScope` is true.
resources
string array
`resources` is a list of matching resources (i.e., lowercase and plural) with, if desired, subresource. For example, [ "services", "nodes/status" ]. This list may not be empty. "*" matches all resources and, if present, must be the only entry. Required.
verbs
string array
`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs and, if present, must be the only entry. Required.

ResourceRequest v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceRequest

ResourceRequest is a request for resources from one particular driver.

FieldDescription
namedResources
NamedResourcesRequest
NamedResources describes a request for resources with the named resources model.
vendorParametersVendorParameters are arbitrary setup parameters for the requested resource. They are ignored while allocating a claim.

ResourceRequirements v1 core

GroupVersionKind
corev1ResourceRequirements

ResourceRequirements describes the compute resource requirements.

FieldDescription
claims
ResourceClaim array
Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container. This is an alpha field and requires enabling the DynamicResourceAllocation feature gate. This field is immutable. It can only be set for containers.
limits
object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests
object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

ResourceRule v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1ResourceRule

ResourceRule is the list of actions the subject is allowed to perform on resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.

FieldDescription
apiGroups
string array
APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "*" means all.
resourceNames
string array
ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed. "*" means all.
resources
string array
Resources is a list of resources this rule applies to. "*" means all in the specified apiGroups. "*/foo" represents the subresource 'foo' for all resources in the specified apiGroups.
verbs
string array
Verb is a list of kubernetes resource API verbs, like: get, list, watch, create, update, delete, proxy. "*" means all.

RoleRef v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1RoleRef

RoleRef contains information that points to the role being used

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced
kind
string
Kind is the type of resource being referenced
name
string
Name is the name of resource being referenced

RollingUpdateStatefulSetStrategy v1 apps

GroupVersionKind
appsv1RollingUpdateStatefulSetStrategy

RollingUpdateStatefulSetStrategy is used to communicate parameter for RollingUpdateStatefulSetStrategyType.

FieldDescription
maxUnavailableThe maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding up. This can not be 0. Defaults to 1. This field is alpha-level and is only honored by servers that enable the MaxUnavailableStatefulSet feature. The field applies to all pods in the range 0 to Replicas-1. That means if there is any unavailable pod in the range 0 to Replicas-1, it will be counted towards MaxUnavailable.
partition
integer
Partition indicates the ordinal at which the StatefulSet should be partitioned for updates. During a rolling update, all pods from ordinal Replicas-1 to Partition are updated. All pods from ordinal Partition-1 to 0 remain untouched. This is helpful in being able to do a canary based deployment. The default value is 0.

RuleWithOperations v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1RuleWithOperations

RuleWithOperations is a tuple of Operations and Resources. It is recommended to make sure that all the tuple expansions are valid.

FieldDescription
apiGroups
string array
APIGroups is the API groups the resources belong to. '\*' is all groups. If '\*' is present, the length of the slice must be one. Required.
apiVersions
string array
APIVersions is the API versions the resources belong to. '\*' is all versions. If '\*' is present, the length of the slice must be one. Required.
operations
string array
Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '\*' is present, the length of the slice must be one. Required.
resources
string array
Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '\*' means all resources, but not subresources. 'pods/\*' means all subresources of pods. '\*/scale' means all scale subresources. '\*/\*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
scope
string
scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "*" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "*" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

SELinuxOptions v1 core

GroupVersionKind
corev1SELinuxOptions

SELinuxOptions are the labels to be applied to the container

FieldDescription
level
string
Level is SELinux level label that applies to the container.
role
string
Role is a SELinux role label that applies to the container.
type
string
Type is a SELinux type label that applies to the container.
user
string
User is a SELinux user label that applies to the container.

Scale v1 autoscaling

GroupVersionKind
autoscalingv1Scale

Scale represents a scaling request for a resource.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ScaleSpec
spec defines the behavior of the scale. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
status
ScaleStatus
status is the current status of the scale. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status. Read-only.

ScaleIOPersistentVolumeSource v1 core

GroupVersionKind
corev1ScaleIOPersistentVolumeSource

ScaleIOPersistentVolumeSource represents a persistent ScaleIO volume

FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs"
gateway
string
gateway is the host address of the ScaleIO API Gateway.
protectionDomain
string
protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
SecretReference
secretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail.
sslEnabled
boolean
sslEnabled is the flag to enable/disable SSL communication with Gateway, default false
storageMode
string
storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned.
storagePool
string
storagePool is the ScaleIO Storage Pool associated with the protection domain.
system
string
system is the name of the storage system as configured in ScaleIO.
volumeName
string
volumeName is the name of a volume already created in the ScaleIO system that is associated with this volume source.

ScaleIOVolumeSource v1 core

GroupVersionKind
corev1ScaleIOVolumeSource

ScaleIOVolumeSource represents a persistent ScaleIO volume

Appears In:
FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs".
gateway
string
gateway is the host address of the ScaleIO API Gateway.
protectionDomain
string
protectionDomain is the name of the ScaleIO Protection Domain for the configured storage.
readOnly
boolean
readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
LocalObjectReference
secretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail.
sslEnabled
boolean
sslEnabled Flag enable/disable SSL communication with Gateway, default false
storageMode
string
storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned.
storagePool
string
storagePool is the ScaleIO Storage Pool associated with the protection domain.
system
string
system is the name of the storage system as configured in ScaleIO.
volumeName
string
volumeName is the name of a volume already created in the ScaleIO system that is associated with this volume source.

Scheduling v1 node.k8s.io

GroupVersionKind
node.k8s.iov1Scheduling

Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.

FieldDescription
nodeSelector
object
nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
tolerations
Toleration array
tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.

ScopeSelector v1 core

GroupVersionKind
corev1ScopeSelector

A scope selector represents the AND of the selectors represented by the scoped-resource selector requirements.

FieldDescription
matchExpressions
ScopedResourceSelectorRequirement array
A list of scope selector requirements by scope of the resources.

ScopedResourceSelectorRequirement v1 core

GroupVersionKind
corev1ScopedResourceSelectorRequirement

A scoped-resource selector requirement is a selector that contains values, a scope name, and an operator that relates the scope name and values.

FieldDescription
operator
string
Represents a scope's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist.
scopeName
string
The name of the scope that the selector applies to.
values
string array
An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

SeccompProfile v1 core

GroupVersionKind
corev1SeccompProfile

SeccompProfile defines a pod/container's seccomp profile settings. Only one profile source may be set.

FieldDescription
localhostProfile
string
localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must be set if type is "Localhost". Must NOT be set for any other type.
type
string
type indicates which kind of seccomp profile will be applied. Valid options are: Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied.

SecretEnvSource v1 core

GroupVersionKind
corev1SecretEnvSource

SecretEnvSource selects a Secret to populate the environment variables with. The contents of the target Secret's Data field will represent the key-value pairs as environment variables.

FieldDescription
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
Specify whether the Secret must be defined

SecretKeySelector v1 core

GroupVersionKind
corev1SecretKeySelector

SecretKeySelector selects a key of a Secret.

FieldDescription
key
string
The key of the secret to select from. Must be a valid secret key.
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
Specify whether the Secret or its key must be defined

SecretProjection v1 core

GroupVersionKind
corev1SecretProjection

Adapts a secret into a projected volume. The contents of the target Secret's Data field will be presented in a projected volume as files using the keys in the Data field as the file names. Note that this is identical to a secret volume source without the default mode.

FieldDescription
items
KeyToPath array
items if unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
name
string
Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
optional
boolean
optional field specify whether the Secret or its key must be defined

SecretReference v1 core

GroupVersionKind
corev1SecretReference

SecretReference represents a Secret Reference. It has enough information to retrieve secret in any namespace

FieldDescription
name
string
name is unique within a namespace to reference a secret resource.
namespace
string
namespace defines the space within which the secret name must be unique.

SecretVolumeSource v1 core

GroupVersionKind
corev1SecretVolumeSource

Adapts a Secret into a volume. The contents of the target Secret's Data field will be presented in a volume as files using the keys in the Data field as the file names. Secret volumes support ownership management and SELinux relabeling.

Appears In:
FieldDescription
defaultMode
integer
defaultMode is Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
items
KeyToPath array
items If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.
optional
boolean
optional field specify whether the Secret or its keys must be defined
secretName
string
secretName is the name of the secret in the pod's namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

SecurityContext v1 core

GroupVersionKind
corev1SecurityContext

SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.

FieldDescription
allowPrivilegeEscalation
boolean
AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.
appArmorProfile
AppArmorProfile
appArmorProfile is the AppArmor options to use by this container. If set, this profile overrides the pod's appArmorProfile. Note that this field cannot be set when spec.os.name is windows.
capabilities
Capabilities
The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.
privileged
boolean
Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.
procMount
string
procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows.
readOnlyRootFilesystem
boolean
Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.
runAsGroup
integer
The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
runAsNonRoot
boolean
Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.
runAsUser
integer
The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seLinuxOptions
SELinuxOptions
The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.
seccompProfile
SeccompProfile
The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows.
windowsOptions
WindowsSecurityContextOptions
The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.

SelectableField v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1SelectableField

SelectableField specifies the JSON path of a field that may be used with field selectors.

FieldDescription
jsonPath
string
jsonPath is a simple JSON path which is evaluated against each custom resource to produce a field selector value. Only JSON paths without the array notation are allowed. Must point to a field of type string, boolean or integer. Types with enum values and strings with formats are allowed. If jsonPath refers to absent field in a resource, the jsonPath evaluates to an empty string. Must not point to metdata fields. Required.

ServerAddressByClientCIDR v1 meta

GroupVersionKind
metav1ServerAddressByClientCIDR

ServerAddressByClientCIDR helps the client to determine the server address that they should use, depending on the clientCIDR that they match.

FieldDescription
clientCIDR
string
The CIDR with which clients can match their IP to figure out the server address that they should use.
serverAddress
string
Address of this server, suitable for a client that matches the above CIDR. This can be a hostname, hostname:port, IP or IP:port.

ServerStorageVersion v1alpha1 internal.apiserver.k8s.io

GroupVersionKind
internal.apiserver.k8s.iov1alpha1ServerStorageVersion

An API server instance reports the version it can decode and the version it encodes objects to when persisting objects in the backend.

FieldDescription
apiServerID
string
The ID of the reporting API server.
decodableVersions
string array
The API server can decode objects encoded in these versions. The encodingVersion must be included in the decodableVersions.
encodingVersion
string
The API server encodes the object to this version when persisting it in the backend (e.g., etcd).
servedVersions
string array
The API server can serve these versions. DecodableVersions must include all ServedVersions.

ServiceAccountSubject v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1ServiceAccountSubject

ServiceAccountSubject holds detailed information for service-account-kind subject.

Other API versions of this object exist: v1beta3
FieldDescription
name
string
`name` is the name of matching ServiceAccount objects, or "*" to match regardless of name. Required.
namespace
string
`namespace` is the namespace of matching ServiceAccount objects. Required.

ServiceAccountTokenProjection v1 core

GroupVersionKind
corev1ServiceAccountTokenProjection

ServiceAccountTokenProjection represents a projected service account token volume. This projection can be used to insert a service account token into the pods runtime filesystem for use against APIs (Kubernetes API Server or otherwise).

FieldDescription
audience
string
audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver.
expirationSeconds
integer
expirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes.
path
string
path is the path relative to the mount point of the file to project the token into.

ServiceBackendPort v1 networking.k8s.io

GroupVersionKind
networking.k8s.iov1ServiceBackendPort

ServiceBackendPort is the service port being referenced.

FieldDescription
name
string
name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
number
integer
number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".

ServicePort v1 core

GroupVersionKind
corev1ServicePort

ServicePort contains information on service's port.

Appears In:
FieldDescription
appProtocol
string
The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
name
string
The name of this port within the service. This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. When considering the endpoints for a Service, this must match the 'name' field in the EndpointPort. Optional if only one ServicePort is defined on this service.
nodePort
integer
The port on each node on which this service is exposed when type is NodePort or LoadBalancer. Usually assigned by the system. If a value is specified, in-range, and not in use it will be used, otherwise the operation will fail. If not specified, a port will be allocated if this Service requires one. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type from NodePort to ClusterIP). More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
port
integer
The port that will be exposed by this service.
protocol
string
The IP protocol for this port. Supports "TCP", "UDP", and "SCTP". Default is TCP.
targetPortNumber or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-service

ServiceReference v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ServiceReference

ServiceReference holds a reference to Service.legacy.k8s.io

FieldDescription
name
string
`name` is the name of the service. Required
namespace
string
`namespace` is the namespace of the service. Required
path
string
`path` is an optional URL path which will be sent in any request to this service.
port
integer
If specified, the port on the service that hosting webhook. Default to 443 for backward compatibility. `port` should be a valid port number (1-65535, inclusive).

SessionAffinityConfig v1 core

GroupVersionKind
corev1SessionAffinityConfig

SessionAffinityConfig represents the configurations of session affinity.

Appears In:
FieldDescription
clientIP
ClientIPConfig
clientIP contains the configurations of Client IP based session affinity.

SleepAction v1 core

GroupVersionKind
corev1SleepAction

SleepAction describes a "sleep" action.

FieldDescription
seconds
integer
Seconds is the number of seconds to sleep.

StatefulSetCondition v1 apps

GroupVersionKind
appsv1StatefulSetCondition

StatefulSetCondition describes the state of a statefulset at a certain point.

FieldDescription
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
message
string
A human readable message indicating details about the transition.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of statefulset condition.

StatefulSetOrdinals v1 apps

GroupVersionKind
appsv1StatefulSetOrdinals

StatefulSetOrdinals describes the policy used for replica ordinal assignment in this StatefulSet.

FieldDescription
start
integer
start is the number representing the first replica's index. It may be used to number replicas from an alternate index (eg: 1-indexed) over the default 0-indexed names, or to orchestrate progressive movement of replicas from one StatefulSet to another. If set, replica indices will be in the range: [.spec.ordinals.start, .spec.ordinals.start + .spec.replicas). If unset, defaults to 0. Replica indices will be in the range: [0, .spec.replicas).

StatefulSetPersistentVolumeClaimRetentionPolicy v1 apps

GroupVersionKind
appsv1StatefulSetPersistentVolumeClaimRetentionPolicy

StatefulSetPersistentVolumeClaimRetentionPolicy describes the policy used for PVCs created from the StatefulSet VolumeClaimTemplates.

FieldDescription
whenDeleted
string
WhenDeleted specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is deleted. The default policy of `Retain` causes PVCs to not be affected by StatefulSet deletion. The `Delete` policy causes those PVCs to be deleted.
whenScaled
string
WhenScaled specifies what happens to PVCs created from StatefulSet VolumeClaimTemplates when the StatefulSet is scaled down. The default policy of `Retain` causes PVCs to not be affected by a scaledown. The `Delete` policy causes the associated PVCs for any excess pods above the replica count to be deleted.

StatefulSetUpdateStrategy v1 apps

GroupVersionKind
appsv1StatefulSetUpdateStrategy

StatefulSetUpdateStrategy indicates the strategy that the StatefulSet controller will use to perform updates. It includes any additional parameters necessary to perform the update for the indicated strategy.

FieldDescription
rollingUpdate
RollingUpdateStatefulSetStrategy
RollingUpdate is used to communicate parameters when Type is RollingUpdateStatefulSetStrategyType.
type
string
Type indicates the type of the StatefulSetUpdateStrategy. Default is RollingUpdate.

Status v1 meta

GroupVersionKind
metav1Status

Status is a return value for calls that don't return other objects.

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
code
integer
Suggested HTTP return code for this status, 0 if not set.
details
StatusDetails
Extended data associated with the reason. Each reason may define its own extended details. This field is optional and the data returned is not guaranteed to conform to any schema except that defined by the reason type.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
message
string
A human-readable description of the status of this operation.
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
reason
string
A machine-readable description of why this operation is in the "Failure" status. If this value is empty there is no information available. A Reason clarifies an HTTP status code but does not override it.
status
string
Status of the operation. One of: "Success" or "Failure". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

StatusCause v1 meta

GroupVersionKind
metav1StatusCause

StatusCause provides more information about an api.Status failure, including cases when multiple errors are encountered.

FieldDescription
field
string
The field of the resource that has caused this error, as named by its JSON serialization. May include dot and postfix notation for nested attributes. Arrays are zero-indexed. Fields may appear more than once in an array of causes due to fields having multiple errors. Optional. Examples: "name" - the field "name" on the current resource "items[0].name" - the field "name" on the first array entry in "items"
message
string
A human-readable description of the cause of the error. This field may be presented as-is to a reader.
reason
string
A machine-readable description of the cause of the error. If this value is empty there is no information available.

StatusDetails v1 meta

GroupVersionKind
metav1StatusDetails

StatusDetails is a set of additional properties that MAY be set by the server to provide additional information about a response. The Reason field of a Status object defines what attributes will be set. Clients must ignore fields that do not match the defined type of each attribute, and should assume that any attribute may be empty, invalid, or under defined.

Appears In:
FieldDescription
causes
StatusCause array
The Causes array includes more details associated with the StatusReason failure. Not all StatusReasons may provide detailed causes.
group
string
The group attribute of the resource associated with the status StatusReason.
kind
string
The kind attribute of the resource associated with the status StatusReason. On some operations may differ from the requested resource Kind. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
The name attribute of the resource associated with the status StatusReason (when there is a single name which can be described).
retryAfterSeconds
integer
If specified, the time in seconds before the operation should be retried. Some errors may indicate the client must take an alternate action - for those errors this field may indicate how long to wait before taking the alternate action.
uid
string
UID of the resource. (when there is a single resource which can be described). More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#uids

StorageOSPersistentVolumeSource v1 core

GroupVersionKind
corev1StorageOSPersistentVolumeSource

Represents a StorageOS persistent volume resource.

FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
ObjectReference
secretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted.
volumeName
string
volumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace.
volumeNamespace
string
volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.

StorageOSVolumeSource v1 core

GroupVersionKind
corev1StorageOSVolumeSource

Represents a StorageOS persistent volume resource.

Appears In:
FieldDescription
fsType
string
fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
readOnly
boolean
readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
secretRef
LocalObjectReference
secretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted.
volumeName
string
volumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace.
volumeNamespace
string
volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.

StorageVersionCondition v1alpha1 internal.apiserver.k8s.io

GroupVersionKind
internal.apiserver.k8s.iov1alpha1StorageVersionCondition

Describes the state of the storageVersion at a certain point.

FieldDescription
lastTransitionTime
Time
Last time the condition transitioned from one status to another.
message
string
A human readable message indicating details about the transition.
observedGeneration
integer
If set, this represents the .metadata.generation that the condition was set based upon.
reason
string
The reason for the condition's last transition.
status
string
Status of the condition, one of True, False, Unknown.
type
string
Type of the condition.

StructuredResourceHandle v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2StructuredResourceHandle

StructuredResourceHandle is the in-tree representation of the allocation result.

FieldDescription
nodeName
string
NodeName is the name of the node providing the necessary resources if the resources are local to a node.
results
DriverAllocationResult array
Results lists all allocated driver resources.
vendorClaimParametersVendorClaimParameters are the per-claim configuration parameters from the resource claim parameters at the time that the claim was allocated.
vendorClassParametersVendorClassParameters are the per-claim configuration parameters from the resource class at the time that the claim was allocated.

Subject v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1Subject

Subject matches the originator of a request, as identified by the request authentication system. There are three ways of matching an originator; by user, group, or service account.

Other API versions of this object exist: v1beta3
FieldDescription
group
GroupSubject
`group` matches based on user group name.
kind
string
`kind` indicates which one of the other fields is non-empty. Required
serviceAccount
ServiceAccountSubject
`serviceAccount` matches ServiceAccounts.
user
UserSubject
`user` matches based on username.

SubjectRulesReviewStatus v1 authorization.k8s.io

GroupVersionKind
authorization.k8s.iov1SubjectRulesReviewStatus

SubjectRulesReviewStatus contains the result of a rules check. This check can be incomplete depending on the set of authorizers the server is configured with and any errors experienced during evaluation. Because authorization rules are additive, if a rule appears in a list it's safe to assume the subject has that permission, even if that list is incomplete.

FieldDescription
evaluationError
string
EvaluationError can appear in combination with Rules. It indicates an error occurred during rule evaluation, such as an authorizer that doesn't support rule evaluation, and that ResourceRules and/or NonResourceRules may be incomplete.
incomplete
boolean
Incomplete is true when the rules returned by this call are incomplete. This is most commonly encountered when an authorizer, such as an external authorizer, doesn't support rules evaluation.
nonResourceRules
NonResourceRule array
NonResourceRules is the list of actions the subject is allowed to perform on non-resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.
resourceRules
ResourceRule array
ResourceRules is the list of actions the subject is allowed to perform on resources. The list ordering isn't significant, may contain duplicates, and possibly be incomplete.

SuccessPolicy v1 batch

GroupVersionKind
batchv1SuccessPolicy

SuccessPolicy describes when a Job can be declared as succeeded based on the success of some indexes.

Appears In:
FieldDescription
rules
SuccessPolicyRule array
rules represents the list of alternative rules for the declaring the Jobs as successful before `.status.succeeded >= .spec.completions`. Once any of the rules are met, the "SucceededCriteriaMet" condition is added, and the lingering pods are removed. The terminal state for such a Job has the "Complete" condition. Additionally, these rules are evaluated in order; Once the Job meets one of the rules, other rules are ignored. At most 20 elements are allowed.

SuccessPolicyRule v1 batch

GroupVersionKind
batchv1SuccessPolicyRule

SuccessPolicyRule describes rule for declaring a Job as succeeded. Each rule must have at least one of the "succeededIndexes" or "succeededCount" specified.

FieldDescription
succeededCount
integer
succeededCount specifies the minimal required size of the actual set of the succeeded indexes for the Job. When succeededCount is used along with succeededIndexes, the check is constrained only to the set of indexes specified by succeededIndexes. For example, given that succeededIndexes is "1-4", succeededCount is "3", and completed indexes are "1", "3", and "5", the Job isn't declared as succeeded because only "1" and "3" indexes are considered in that rules. When this field is null, this doesn't default to any value and is never evaluated at any time. When specified it needs to be a positive integer.
succeededIndexes
string
succeededIndexes specifies the set of indexes which need to be contained in the actual set of the succeeded indexes for the Job. The list of indexes must be within 0 to ".spec.completions-1" and must not contain duplicates. At least one element is required. The indexes are represented as intervals separated by commas. The intervals can be a decimal integer or a pair of decimal integers separated by a hyphen. The number are listed in represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". When this field is null, this field doesn't default to any value and is never evaluated at any time.

Sysctl v1 core

GroupVersionKind
corev1Sysctl

Sysctl defines a kernel parameter to be set

FieldDescription
name
string
Name of a property to set
value
string
Value of a property to set

TCPSocketAction v1 core

GroupVersionKind
corev1TCPSocketAction

TCPSocketAction describes an action based on opening a socket

FieldDescription
host
string
Optional: Host name to connect to, defaults to the pod IP.
portNumber or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Taint v1 core

GroupVersionKind
corev1Taint

The node this Taint is attached to has the "effect" on any pod that does not tolerate the Taint.

Appears In:
FieldDescription
effect
string
Required. The effect of the taint on pods that do not tolerate the taint. Valid effects are NoSchedule, PreferNoSchedule and NoExecute.
key
string
Required. The taint key to be applied to a node.
timeAdded
Time
TimeAdded represents the time at which the taint was added. It is only written for NoExecute taints.
value
string
The taint value corresponding to the taint key.

Toleration v1 core

GroupVersionKind
corev1Toleration

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

FieldDescription
effect
string
Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.
key
string
Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.
operator
string
Operator represents a key's relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.
tolerationSeconds
integer
TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.
value
string
Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.

TopologySelectorLabelRequirement v1 core

GroupVersionKind
corev1TopologySelectorLabelRequirement

A topology selector requirement is a selector that matches given label. This is an alpha feature and may change in the future.

FieldDescription
key
string
The label key that the selector applies to.
values
string array
An array of string values. One value must match the label to be selected. Each entry in Values is ORed.

TopologySelectorTerm v1 core

GroupVersionKind
corev1TopologySelectorTerm

A topology selector term represents the result of label queries. A null or empty topology selector term matches no objects. The requirements of them are ANDed. It provides a subset of functionality as NodeSelectorTerm. This is an alpha feature and may change in the future.

FieldDescription
matchLabelExpressions
TopologySelectorLabelRequirement array
A list of topology selector requirements by labels.

TopologySpreadConstraint v1 core

GroupVersionKind
corev1TopologySpreadConstraint

TopologySpreadConstraint specifies how to spread matching pods among the given topology.

Appears In:
FieldDescription
labelSelector
LabelSelector
LabelSelector is used to find matching pods. Pods that match this label selector are counted to determine the number of pods in their corresponding topology domain.
matchLabelKeys
string array
MatchLabelKeys is a set of pod label keys to select the pods over which spreading will be calculated. The keys are used to lookup values from the incoming pod labels, those key-value labels are ANDed with labelSelector to select the group of existing pods over which spreading will be calculated for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. MatchLabelKeys cannot be set when LabelSelector isn't set. Keys that don't exist in the incoming pod labels will be ignored. A null or empty list means only match against labelSelector. This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default).
maxSkew
integer
MaxSkew describes the degree to which pods may be unevenly distributed. When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference between the number of matching pods in the target topology and the global minimum. The global minimum is the minimum number of matching pods in an eligible domain or zero if the number of eligible domains is less than MinDomains. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 2/2/1: In this case, the global minimum is 1. | zone1 | zone2 | zone3 | | P P | P P | P | - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) violate MaxSkew(1). - if MaxSkew is 2, incoming pod can be scheduled onto any zone. When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence to topologies that satisfy it. It's a required field. Default value is 1 and 0 is not allowed.
minDomains
integer
MinDomains indicates a minimum number of eligible domains. When the number of eligible domains with matching topology keys is less than minDomains, Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. And when the number of eligible domains with matching topology keys equals or greater than minDomains, this value has no effect on scheduling. As a result, when the number of eligible domains is less than minDomains, scheduler won't schedule more than maxSkew Pods to those domains. If value is nil, the constraint behaves as if MinDomains is equal to 1. Valid values are integers greater than 0. When value is not nil, WhenUnsatisfiable must be DoNotSchedule. For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same labelSelector spread as 2/2/2: | zone1 | zone2 | zone3 | | P P | P P | P P | The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. In this situation, new pod with the same labelSelector cannot be scheduled, because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, it will violate MaxSkew.
nodeAffinityPolicy
string
NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector when calculating pod topology spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. If this value is nil, the behavior is equivalent to the Honor policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.
nodeTaintsPolicy
string
NodeTaintsPolicy indicates how we will treat node taints when calculating pod topology spread skew. Options are: - Honor: nodes without taints, along with tainted nodes for which the incoming pod has a toleration, are included. - Ignore: node taints are ignored. All nodes are included. If this value is nil, the behavior is equivalent to the Ignore policy. This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag.
topologyKey
string
TopologyKey is the key of node labels. Nodes that have a label with this key and identical values are considered to be in the same topology. We consider each <key, value> as a "bucket", and try to put balanced number of pods into each bucket. We define a domain as a particular instance of a topology. Also, we define an eligible domain as a domain whose nodes meet the requirements of nodeAffinityPolicy and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. It's a required field.
whenUnsatisfiable
string
WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy the spread constraint. - DoNotSchedule (default) tells the scheduler not to schedule it. - ScheduleAnyway tells the scheduler to schedule the pod in any location, but giving higher precedence to topologies that would help reduce the skew. A constraint is considered "Unsatisfiable" for an incoming pod if and only if every possible node assignment for that pod would violate "MaxSkew" on some topology. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 3/1/1: | zone1 | zone2 | zone3 | | P P P | P | P | If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler won't make it *more* imbalanced. It's a required field.

TypeChecking v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1TypeChecking

TypeChecking contains results of type checking the expressions in the ValidatingAdmissionPolicy

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
expressionWarnings
ExpressionWarning array
The type checking warnings for each expression.

TypedLocalObjectReference v1 core

GroupVersionKind
corev1TypedLocalObjectReference

TypedLocalObjectReference contains enough information to let you locate the typed referenced object inside the same namespace.

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
kind
string
Kind is the type of resource being referenced
name
string
Name is the name of resource being referenced

TypedObjectReference v1 core

GroupVersionKind
corev1TypedObjectReference

FieldDescription
apiGroup
string
APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
kind
string
Kind is the type of resource being referenced
name
string
Name is the name of resource being referenced
namespace
string
Namespace is the namespace of resource being referenced Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled.

UncountedTerminatedPods v1 batch

GroupVersionKind
batchv1UncountedTerminatedPods

UncountedTerminatedPods holds UIDs of Pods that have terminated but haven't been accounted in Job status counters.

Appears In:
FieldDescription
failed
string array
failed holds UIDs of failed Pods.
succeeded
string array
succeeded holds UIDs of succeeded Pods.

UserInfo v1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1UserInfo

UserInfo holds the information about the user needed to implement the user.Info interface.

FieldDescription
extra
object
Any additional information provided by the authenticator.
groups
string array
The names of groups this user is a part of.
uid
string
A unique value that identifies this user across time. If this user is deleted and another user by the same name is added, they will have different UIDs.
username
string
The name that uniquely identifies this user among all active users.

UserSubject v1 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1UserSubject

UserSubject holds detailed information for user-kind subject.

Other API versions of this object exist: v1beta3
FieldDescription
name
string
`name` is the username that matches, or "*" to match all usernames. Required.

ValidatingWebhook v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1ValidatingWebhook

ValidatingWebhook describes an admission webhook and the resources and operations it applies to.

FieldDescription
admissionReviewVersions
string array
AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
clientConfig
WebhookClientConfig
ClientConfig defines how to communicate with the hook. Required
failurePolicy
string
FailurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
matchConditions
MatchCondition array
patch strategy: merge
patch merge key: name
MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the webhook is skipped. 2. If ALL matchConditions evaluate to TRUE, the webhook is called. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
matchPolicy
string
matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Equivalent"
name
string
The name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where "imagepolicy" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
namespaceSelector
LabelSelector
NamespaceSelector decides whether to run the webhook on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the webhook. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the webhook on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
objectSelector
LabelSelector
ObjectSelector decides whether to run the webhook based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the webhook, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
rules
RuleWithOperations array
Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
sideEffects
string
SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
timeoutSeconds
integer
TimeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.

Validation v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1Validation

Validation specifies the CEL expression which is used to apply the validation.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec CEL expressions have access to the contents of the API request/response, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"} - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"} - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"} Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. Required.
message
string
Message represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".
messageExpression
string
messageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a validation, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the `expression` except for 'authorizer' and 'authorizer.requestResource'. Example: "object.x must be less than max ("+string(params.max)+")"
reason
string
Reason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.

ValidationRule v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1ValidationRule

ValidationRule describes a validation rule written in the CEL expression language.

FieldDescription
fieldPath
string
fieldPath represents the field path returned when the validation fails. It must be a relative JSON path (i.e. with array notation) scoped to the location of this x-kubernetes-validations extension in the schema and refer to an existing field. e.g. when validation checks if a specific attribute `foo` under a map `testMap`, the fieldPath could be set to `.testMap.foo` If the validation checks two lists must have unique attributes, the fieldPath could be set to either of the list: e.g. `.testList` It does not support list numeric index. It supports child operation to refer to an existing field currently. Refer to [JSONPath support in Kubernetes](https://kubernetes.io/docs/reference/kubectl/jsonpath/) for more info. Numeric index of array is not supported. For field name which contains special characters, use `['specialName']` to refer the field name. e.g. for attribute `foo.34$` appears in a list `testList`, the fieldPath could be set to `.testList['foo.34$']`
message
string
Message represents the message displayed when validation fails. The message is required if the Rule contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host"
messageExpression
string
MessageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a rule, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the rule; the only difference is the return type. Example: "x must be less than max ("+string(self.max)+")"
optionalOldSelf
boolean
optionalOldSelf is used to opt a transition rule into evaluation even when the object is first created, or if the old object is missing the value. When enabled `oldSelf` will be a CEL optional whose value will be `None` if there is no old value, or when the object is initially created. You may check for presence of oldSelf using `oldSelf.hasValue()` and unwrap it after checking using `oldSelf.value()`. Check the CEL documentation for Optional types for more information: https://pkg.go.dev/github.com/google/cel-go/cel#OptionalTypes May not be set unless `oldSelf` is used in `rule`.
reason
string
reason provides a machine-readable validation failure reason that is returned to the caller when a request fails this validation rule. The HTTP status code returned to the caller will match the reason of the reason of the first failed validation rule. The currently supported reasons are: "FieldValueInvalid", "FieldValueForbidden", "FieldValueRequired", "FieldValueDuplicate". If not set, default to use "FieldValueInvalid". All future added reasons must be accepted by clients when reading this value and unknown reasons should be treated as FieldValueInvalid.
rule
string
Rule represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec The Rule is scoped to the location of the x-kubernetes-validations extension in the schema. The `self` variable in the CEL expression is bound to the scoped value. Example: - Rule scoped to the root of a resource with a status subresource: {"rule": "self.status.actual <= self.spec.maxDesired"} If the Rule is scoped to an object with properties, the accessible properties of the object are field selectable via `self.field` and field presence can be checked via `has(self.field)`. Null valued fields are treated as absent fields in CEL expressions. If the Rule is scoped to an object with additionalProperties (i.e. a map) the value of the map are accessible via `self[mapKey]`, map containment can be checked via `mapKey in self` and all entries of the map are accessible via CEL macros and functions such as `self.all(...)`. If the Rule is scoped to an array, the elements of the array are accessible via `self[i]` and also by macros and functions. If the Rule is scoped to a scalar, `self` is bound to the scalar value. Examples: - Rule scoped to a map of objects: {"rule": "self.components['Widget'].priority < 10"} - Rule scoped to a list of integers: {"rule": "self.values.all(value, value >= 0 && value < 100)"} - Rule scoped to a string value: {"rule": "self.startsWith('kube')"} The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object and from any x-kubernetes-embedded-resource annotated objects. No other metadata properties are accessible. Unknown data preserved in custom resources via x-kubernetes-preserve-unknown-fields is not accessible in CEL expressions. This includes: - Unknown field values that are preserved by object schemas with x-kubernetes-preserve-unknown-fields. - Object properties where the property schema is of an "unknown type". An "unknown type" is recursively defined as: - A schema with no type and x-kubernetes-preserve-unknown-fields set to true - An array where the items schema is of an "unknown type" - An object where the additionalProperties schema is of an "unknown type" Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Rule accessing a property named "namespace": {"rule": "self.__namespace__ > 0"} - Rule accessing a property named "x-prop": {"rule": "self.x__dash__prop > 0"} - Rule accessing a property named "redact__d": {"rule": "self.redact__underscores__d > 0"} Equality on arrays with x-kubernetes-list-type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. If `rule` makes use of the `oldSelf` variable it is implicitly a `transition rule`. By default, the `oldSelf` variable is the same type as `self`. When `optionalOldSelf` is true, the `oldSelf` variable is a CEL optional variable whose value() is the same type as `self`. See the documentation for the `optionalOldSelf` field for details. Transition rules by default are applied only on UPDATE requests and are skipped if an old value could not be found. You can opt a transition rule into unconditional evaluation by setting `optionalOldSelf` to true.

Variable v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1Variable

Variable is the definition of a variable that is used for composition. A variable is defined as a named expression.

Other API versions of this object exist: v1beta1 v1alpha1
FieldDescription
expression
string
Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
name
string
Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

VendorParameters v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2VendorParameters

VendorParameters are opaque parameters for one particular driver.

FieldDescription
driverName
string
DriverName is the name used by the DRA driver kubelet plugin.
parametersParameters can be arbitrary setup parameters. They are ignored while allocating a claim.

VolumeAttachmentSource v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1VolumeAttachmentSource

VolumeAttachmentSource represents a volume that should be attached. Right now only PersistenVolumes can be attached via external attacher, in future we may allow also inline volumes in pods. Exactly one member can be set.

FieldDescription
inlineVolumeSpec
PersistentVolumeSpec
inlineVolumeSpec contains all the information necessary to attach a persistent volume defined by a pod's inline VolumeSource. This field is populated only for the CSIMigration feature. It contains translated fields from a pod's inline VolumeSource to a PersistentVolumeSpec. This field is beta-level and is only honored by servers that enabled the CSIMigration feature.
persistentVolumeName
string
persistentVolumeName represents the name of the persistent volume to attach.

VolumeDevice v1 core

GroupVersionKind
corev1VolumeDevice

volumeDevice describes a mapping of a raw block device within a container.

FieldDescription
devicePath
string
devicePath is the path inside of the container that the device will be mapped to.
name
string
name must match the name of a persistentVolumeClaim in the pod

VolumeError v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1VolumeError

VolumeError captures an error encountered during a volume operation.

FieldDescription
message
string
message represents the error encountered during Attach or Detach operation. This string may be logged, so it should not contain sensitive information.
time
Time
time represents the time the error was encountered.

VolumeMount v1 core

GroupVersionKind
corev1VolumeMount

VolumeMount describes a mounting of a Volume within a container.

FieldDescription
mountPath
string
Path within the container at which the volume should be mounted. Must not contain ':'.
mountPropagation
string
mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified (which defaults to None).
name
string
This must match the Name of a Volume.
readOnly
boolean
Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.
recursiveReadOnly
string
RecursiveReadOnly specifies whether read-only mounts should be handled recursively. If ReadOnly is false, this field has no meaning and must be unspecified. If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason. If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None). If this field is not specified, it is treated as an equivalent of Disabled.
subPath
string
Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root).
subPathExpr
string
Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.

VolumeNodeAffinity v1 core

GroupVersionKind
corev1VolumeNodeAffinity

VolumeNodeAffinity defines constraints that limit what nodes this volume can be accessed from.

FieldDescription
required
NodeSelector
required specifies hard node constraints that must be met.

VolumeNodeResources v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1VolumeNodeResources

VolumeNodeResources is a set of resource limits for scheduling of volumes.

FieldDescription
count
integer
count indicates the maximum number of unique volumes managed by the CSI driver that can be used on a node. A volume that is both attached and mounted on a node is considered to be used once, not twice. The same rule applies for a unique volume that is shared among multiple pods on the same node. If this field is not specified, then the supported number of volumes on this node is unbounded.

VolumeProjection v1 core

GroupVersionKind
corev1VolumeProjection

Projection that may be projected along with other supported volume types

FieldDescription
clusterTrustBundle
ClusterTrustBundleProjection
ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field of ClusterTrustBundle objects in an auto-updating file. Alpha, gated by the ClusterTrustBundleProjection feature gate. ClusterTrustBundle objects can either be selected by name, or by the combination of signer name and a label selector. Kubelet performs aggressive normalization of the PEM contents written into the pod filesystem. Esoteric PEM features such as inter-block comments and block headers are stripped. Certificates are deduplicated. The ordering of certificates within the file is arbitrary, and Kubelet may change the order over time.
configMap
ConfigMapProjection
configMap information about the configMap data to project
downwardAPI
DownwardAPIProjection
downwardAPI information about the downwardAPI data to project
secret
SecretProjection
secret information about the secret data to project
serviceAccountToken
ServiceAccountTokenProjection
serviceAccountToken is information about the serviceAccountToken data to project

VolumeResourceRequirements v1 core

GroupVersionKind
corev1VolumeResourceRequirements

VolumeResourceRequirements describes the storage resource requirements for a volume.

FieldDescription
limits
object
Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/
requests
object
Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. Requests cannot exceed Limits. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

VsphereVirtualDiskVolumeSource v1 core

GroupVersionKind
corev1VsphereVirtualDiskVolumeSource

Represents a vSphere volume resource.

FieldDescription
fsType
string
fsType is filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
storagePolicyID
string
storagePolicyID is the storage Policy Based Management (SPBM) profile ID associated with the StoragePolicyName.
storagePolicyName
string
storagePolicyName is the storage Policy Based Management (SPBM) profile name.
volumePath
string
volumePath is the path that identifies vSphere volume vmdk

WatchEvent v1 meta

GroupVersionKind
metav1WatchEvent

Event represents a single event to a watched resource.

FieldDescription
objectObject is: * If Type is Added or Modified: the new state of the object. * If Type is Deleted: the state of the object immediately before deletion. * If Type is Error: *Status is recommended; other types may make sense depending on context.
type
string

WebhookClientConfig v1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1WebhookClientConfig

WebhookClientConfig contains the information to make a TLS connection with the webhook

FieldDescription
caBundle
string
`caBundle` is a PEM encoded CA bundle which will be used to validate the webhook's server certificate. If unspecified, system trust roots on the apiserver are used.
service
ServiceReference
`service` is a reference to the service for this webhook. Either `service` or `url` must be specified. If the webhook is running within the cluster, then you should use `service`.
url
string
`url` gives the location of the webhook, in standard URL form (`scheme://host:port/path`). Exactly one of `url` or `service` must be specified. The `host` should not refer to a service running in the cluster; use the `service` field instead. The host might be resolved via external DNS in some apiservers (e.g., `kube-apiserver` cannot resolve in-cluster DNS as that would be a layering violation). `host` may also be an IP address. Please note that using `localhost` or `127.0.0.1` as a `host` is risky unless you take great care to run this webhook on all hosts which run an apiserver which might need to make calls to this webhook. Such installs are likely to be non-portable, i.e., not easy to turn up in a new cluster. The scheme must be "https"; the URL must begin with "https://". A path is optional, and if present may be any string permissible in a URL. You may use the path to pass an arbitrary string to the webhook, for example, a cluster identifier. Attempting to use a user or basic auth e.g. "user:password@" is not allowed. Fragments ("#...") and query parameters ("?...") are not allowed, either.

WebhookConversion v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1WebhookConversion

WebhookConversion describes how to call a conversion webhook

FieldDescription
clientConfig
WebhookClientConfig
clientConfig is the instructions for how to call the webhook if strategy is `Webhook`.
conversionReviewVersions
string array
conversionReviewVersions is an ordered list of preferred `ConversionReview` versions the Webhook expects. The API server will use the first version in the list which it supports. If none of the versions specified in this list are supported by API server, conversion will fail for the custom resource. If a persisted Webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail.

WeightedPodAffinityTerm v1 core

GroupVersionKind
corev1WeightedPodAffinityTerm

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

FieldDescription
podAffinityTerm
PodAffinityTerm
Required. A pod affinity term, associated with the corresponding weight.
weight
integer
weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

WindowsSecurityContextOptions v1 core

GroupVersionKind
corev1WindowsSecurityContextOptions

WindowsSecurityContextOptions contain Windows-specific options and credentials.

FieldDescription
gmsaCredentialSpec
string
GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.
gmsaCredentialSpecName
string
GMSACredentialSpecName is the name of the GMSA credential spec to use.
hostProcess
boolean
HostProcess determines if a container should be run as a 'Host Process' container. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true.
runAsUserName
string
The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.

Old API Versions

This section contains older versions of resources shown above.

AuditAnnotation v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1AuditAnnotation
Other API versions of this object exist: v1 v1alpha1
FieldDescription
key
string
key specifies the audit annotation key. The audit annotation keys of a ValidatingAdmissionPolicy must be unique. The key must be a qualified name ([A-Za-z0-9][-A-Za-z0-9_.]*) no more than 63 bytes in length. The key is combined with the resource name of the ValidatingAdmissionPolicy to construct an audit annotation key: "{ValidatingAdmissionPolicy name}/{key}". If an admission webhook uses the same resource name as this ValidatingAdmissionPolicy and the same audit annotation key, the annotation key will be identical. In this case, the first annotation written with the key will be included in the audit event and all subsequent annotations with the same key will be discarded. Required.
valueExpression
string
valueExpression represents the expression which is evaluated by CEL to produce an audit annotation value. The expression must evaluate to either a string or null value. If the expression evaluates to a string, the audit annotation is included with the string value. If the expression evaluates to null or empty string the audit annotation will be omitted. The valueExpression may be no longer than 5kb in length. If the result of the valueExpression is more than 10kb in length, it will be truncated to 10kb. If multiple ValidatingAdmissionPolicyBinding resources match an API request, then the valueExpression will be evaluated for each binding. All unique values produced by the valueExpressions will be joined together in a comma-separated list. Required.

AuditAnnotation v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1AuditAnnotation
Other API versions of this object exist: v1 v1beta1
FieldDescription
key
string
key specifies the audit annotation key. The audit annotation keys of a ValidatingAdmissionPolicy must be unique. The key must be a qualified name ([A-Za-z0-9][-A-Za-z0-9_.]*) no more than 63 bytes in length. The key is combined with the resource name of the ValidatingAdmissionPolicy to construct an audit annotation key: "{ValidatingAdmissionPolicy name}/{key}". If an admission webhook uses the same resource name as this ValidatingAdmissionPolicy and the same audit annotation key, the annotation key will be identical. In this case, the first annotation written with the key will be included in the audit event and all subsequent annotations with the same key will be discarded. Required.
valueExpression
string
valueExpression represents the expression which is evaluated by CEL to produce an audit annotation value. The expression must evaluate to either a string or null value. If the expression evaluates to a string, the audit annotation is included with the string value. If the expression evaluates to null or empty string the audit annotation will be omitted. The valueExpression may be no longer than 5kb in length. If the result of the valueExpression is more than 10kb in length, it will be truncated to 10kb. If multiple ValidatingAdmissionPolicyBinding resources match an API request, then the valueExpression will be evaluated for each binding. All unique values produced by the valueExpressions will be joined together in a comma-separated list. Required.

CrossVersionObjectReference v1 autoscaling

GroupVersionKind
autoscalingv1CrossVersionObjectReference
Other API versions of this object exist: v2
FieldDescription
apiVersion
string
apiVersion is the API version of the referent
kind
string
kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
name
string
name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names

EndpointPort v1 discovery.k8s.io

GroupVersionKind
discovery.k8s.iov1EndpointPort
FieldDescription
appProtocol
string
The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
name
string
name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
port
integer
port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
protocol
string
protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

Event v1 core

GroupVersionKind
corev1Event
Appears In:
FieldDescription
action
string
What action was taken/failed regarding to the Regarding object.
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
count
integer
The number of times this event has occurred.
eventTime
MicroTime
Time when this Event was first observed.
firstTimestamp
Time
The time at which the event was first recorded. (Time of server receipt is in TypeMeta.)
involvedObject
ObjectReference
The object that this event is about.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
lastTimestamp
Time
The time at which the most recent occurrence of this event was recorded.
message
string
A human-readable description of the status of this operation.
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
reason
string
This should be a short, machine understandable string that gives the reason for the transition into the object's current status.
related
ObjectReference
Optional secondary object for more complex actions.
reportingComponent
string
Name of the controller that emitted this Event, e.g. `kubernetes.io/kubelet`.
reportingInstance
string
ID of the controller instance, e.g. `kubelet-xyzf`.
series
EventSeries
Data about the Event series this event represents or nil if it's a singleton Event.
source
EventSource
The component reporting this event. Should be a short machine understandable string.
type
string
Type of this event (Normal, Warning), new types could be added in the future

EventList v1 core

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
Event array
List of events
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create an Event

HTTP Request

POST /api/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Event

Response

CodeDescription
200
Event
OK
201
Event
Created
202
Event
Accepted

Patch

partially update the specified Event

HTTP Request

PATCH /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
Event
OK
201
Event
Created

Replace

replace the specified Event

HTTP Request

PUT /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
Event

Response

CodeDescription
200
Event
OK
201
Event
Created

Delete

delete an Event

HTTP Request

DELETE /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of Event

HTTP Request

DELETE /api/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified Event

HTTP Request

GET /api/v1/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
Event
OK

List

list or watch objects of kind Event

HTTP Request

GET /api/v1/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EventList
OK

List All Namespaces

list or watch objects of kind Event

HTTP Request

GET /api/v1/events

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
EventList
OK

Watch

watch changes to an object of kind Event. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/events/{name}

Path Parameters

ParameterDescription
namename of the Event
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/namespaces/{namespace}/events

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of Event. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /api/v1/watch/events

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

EventSeries v1 core

GroupVersionKind
corev1EventSeries
Appears In:
FieldDescription
count
integer
Number of occurrences in this series up to the last heartbeat time
lastObservedTime
MicroTime
Time of the last occurrence observed

ExemptPriorityLevelConfiguration v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3ExemptPriorityLevelConfiguration
Other API versions of this object exist: v1
FieldDescription
lendablePercent
integer
`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. This value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )
nominalConcurrencyShares
integer
`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats nominally reserved for this priority level. This DOES NOT limit the dispatching from this priority level but affects the other priority levels through the borrowing mechanism. The server's concurrency limit (ServerCL) is divided among all the priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of zero.

ExpressionWarning v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1ExpressionWarning
Other API versions of this object exist: v1 v1alpha1
FieldDescription
fieldRef
string
The path to the field that refers the expression. For example, the reference to the expression of the first item of validations is "spec.validations[0].expression"
warning
string
The content of type checking information in a human-readable form. Each line of the warning contains the type that the expression is checked against, followed by the type check error from the compiler.

ExpressionWarning v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1ExpressionWarning
Other API versions of this object exist: v1 v1beta1
FieldDescription
fieldRef
string
The path to the field that refers the expression. For example, the reference to the expression of the first item of validations is "spec.validations[0].expression"
warning
string
The content of type checking information in a human-readable form. Each line of the warning contains the type that the expression is checked against, followed by the type check error from the compiler.

FlowDistinguisherMethod v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3FlowDistinguisherMethod
Other API versions of this object exist: v1
FieldDescription
type
string
`type` is the type of flow distinguisher method The supported types are "ByUser" and "ByNamespace". Required.

FlowSchema v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3FlowSchema
Other API versions of this object exist: v1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
FlowSchemaSpec
`spec` is the specification of the desired behavior of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
FlowSchemaStatus
`status` is the current status of a FlowSchema. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

FlowSchemaSpec v1beta3 flowcontrol

FieldDescription
distinguisherMethod
FlowDistinguisherMethod
`distinguisherMethod` defines how to compute the flow distinguisher for requests that match this schema. `nil` specifies that the distinguisher is disabled and thus will always be the empty string.
matchingPrecedence
integer
`matchingPrecedence` is used to choose among the FlowSchemas that match a given request. The chosen FlowSchema is among those with the numerically lowest (which we take to be logically highest) MatchingPrecedence. Each MatchingPrecedence value must be ranged in [1,10000]. Note that if the precedence is not specified, it will be set to 1000 as default.
priorityLevelConfiguration
PriorityLevelConfigurationReference
`priorityLevelConfiguration` should reference a PriorityLevelConfiguration in the cluster. If the reference cannot be resolved, the FlowSchema will be ignored and marked as invalid in its status. Required.
rules
PolicyRulesWithSubjects array
`rules` describes which requests will match this flow schema. This FlowSchema matches a request if and only if at least one member of rules matches the request. if it is an empty slice, there will be no requests matching the FlowSchema.

FlowSchemaStatus v1beta3 flowcontrol

FieldDescription
conditions
FlowSchemaCondition array
patch strategy: merge
patch merge key: type
`conditions` is a list of the current states of FlowSchema.

FlowSchemaList v1beta3 flowcontrol

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
FlowSchema array
`items` is a list of FlowSchemas.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
`metadata` is the standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a FlowSchema

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created
202
FlowSchema
Accepted

Patch

partially update the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Replace

replace the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Delete

delete a FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of FlowSchema

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
FlowSchema
OK

List

list or watch objects of kind FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
FlowSchemaList
OK

Watch

watch changes to an object of kind FlowSchema. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/watch/flowschemas/{name}

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of FlowSchema. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/watch/flowschemas

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified FlowSchema

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

Read Status

read status of the specified FlowSchema

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
FlowSchema
OK

Replace Status

replace status of the specified FlowSchema

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1beta3/flowschemas/{name}/status

Path Parameters

ParameterDescription
namename of the FlowSchema

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
FlowSchema

Response

CodeDescription
200
FlowSchema
OK
201
FlowSchema
Created

FlowSchemaCondition v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3FlowSchemaCondition
Other API versions of this object exist: v1
FieldDescription
lastTransitionTime
Time
`lastTransitionTime` is the last time the condition transitioned from one status to another.
message
string
`message` is a human-readable message indicating details about last transition.
reason
string
`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
status
string
`status` is the status of the condition. Can be True, False, Unknown. Required.
type
string
`type` is the type of the condition. Required.

GroupSubject v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3GroupSubject
Other API versions of this object exist: v1
FieldDescription
name
string
name is the user group that matches, or "*" to match all user groups. See https://github.com/kubernetes/apiserver/blob/master/pkg/authentication/user/user.go for some well-known group names. Required.

HorizontalPodAutoscaler v1 autoscaling

GroupVersionKind
autoscalingv1HorizontalPodAutoscaler
Other API versions of this object exist: v2
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
HorizontalPodAutoscalerSpec
spec defines the behaviour of autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
status
HorizontalPodAutoscalerStatus
status is the current information about the autoscaler.

HorizontalPodAutoscalerSpec v1 autoscaling

FieldDescription
maxReplicas
integer
maxReplicas is the upper limit for the number of pods that can be set by the autoscaler; cannot be smaller than MinReplicas.
minReplicas
integer
minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down. It defaults to 1 pod. minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured. Scaling is active as long as at least one metric value is available.
scaleTargetRef
CrossVersionObjectReference
reference to scaled resource; horizontal pod autoscaler will learn the current resource consumption and will set the desired number of pods by using its Scale subresource.
targetCPUUtilizationPercentage
integer
targetCPUUtilizationPercentage is the target average CPU utilization (represented as a percentage of requested CPU) over all the pods; if not specified the default autoscaling policy will be used.

HorizontalPodAutoscalerStatus v1 autoscaling

FieldDescription
currentCPUUtilizationPercentage
integer
currentCPUUtilizationPercentage is the current average CPU utilization over all pods, represented as a percentage of requested CPU, e.g. 70 means that an average pod is using now 70% of its requested CPU.
currentReplicas
integer
currentReplicas is the current number of replicas of pods managed by this autoscaler.
desiredReplicas
integer
desiredReplicas is the desired number of replicas of pods managed by this autoscaler.
lastScaleTime
Time
lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods; used by the autoscaler to control how often the number of pods is changed.
observedGeneration
integer
observedGeneration is the most recent generation observed by this autoscaler.

HorizontalPodAutoscalerList v1 autoscaling

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
HorizontalPodAutoscaler array
items is the list of horizontal pod autoscaler objects.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata.

Write Operations

Create

create a HorizontalPodAutoscaler

HTTP Request

POST /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created
202
HorizontalPodAutoscaler
Accepted

Patch

partially update the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Replace

replace the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Delete

delete a HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of HorizontalPodAutoscaler

HTTP Request

DELETE /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
HorizontalPodAutoscaler
OK

List

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
HorizontalPodAutoscalerList
OK

List All Namespaces

list or watch objects of kind HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/horizontalpodautoscalers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
HorizontalPodAutoscalerList
OK

Watch

watch changes to an object of kind HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/autoscaling/v1/watch/namespaces/{namespace}/horizontalpodautoscalers/{name}

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v1/watch/namespaces/{namespace}/horizontalpodautoscalers

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of HorizontalPodAutoscaler. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/autoscaling/v1/watch/horizontalpodautoscalers

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified HorizontalPodAutoscaler

HTTP Request

PATCH /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

Read Status

read status of the specified HorizontalPodAutoscaler

HTTP Request

GET /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
HorizontalPodAutoscaler
OK

Replace Status

replace status of the specified HorizontalPodAutoscaler

HTTP Request

PUT /apis/autoscaling/v1/namespaces/{namespace}/horizontalpodautoscalers/{name}/status

Path Parameters

ParameterDescription
namename of the HorizontalPodAutoscaler
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
HorizontalPodAutoscaler

Response

CodeDescription
200
HorizontalPodAutoscaler
OK
201
HorizontalPodAutoscaler
Created

LimitResponse v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3LimitResponse
Other API versions of this object exist: v1
FieldDescription
queuing
QueuingConfiguration
`queuing` holds the configuration parameters for queuing. This field may be non-empty only if `type` is `"Queue"`.
type
string
`type` is "Queue" or "Reject". "Queue" means that requests that can not be executed upon arrival are held in a queue until they can be executed or a queuing limit is reached. "Reject" means that requests that can not be executed upon arrival are rejected. Required.

LimitedPriorityLevelConfiguration v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3LimitedPriorityLevelConfiguration
Other API versions of this object exist: v1
FieldDescription
borrowingLimitPercent
integer
`borrowingLimitPercent`, if present, configures a limit on how many seats this priority level can borrow from other priority levels. The limit is known as this level's BorrowingConcurrencyLimit (BorrowingCL) and is a limit on the total number of seats that this level may borrow at any one time. This field holds the ratio of that limit to the level's nominal concurrency limit. When this field is non-nil, it must hold a non-negative integer and the limit is calculated as follows. BorrowingCL(i) = round( NominalCL(i) * borrowingLimitPercent(i)/100.0 ) The value of this field can be more than 100, implying that this priority level can borrow a number of seats that is greater than its own nominal concurrency limit (NominalCL). When this field is left `nil`, the limit is effectively infinite.
lendablePercent
integer
`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. The value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )
limitResponse
LimitResponse
`limitResponse` indicates what to do with requests that can not be executed right now
nominalConcurrencyShares
integer
`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server's concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of 30.

MatchCondition v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1MatchCondition
Other API versions of this object exist: v1 v1alpha1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. Must evaluate to bool. CEL expressions have access to the contents of the AdmissionRequest and Authorizer, organized into CEL variables: 'object' - The object from the incoming request. The value is null for DELETE requests. 'oldObject' - The existing object. The value is null for CREATE requests. 'request' - Attributes of the admission request(/pkg/apis/admission/types.go#AdmissionRequest). 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/ Required.
name
string
Name is an identifier for this match condition, used for strategic merging of MatchConditions, as well as providing an identifier for logging purposes. A good name should be descriptive of the associated expression. Name must be a qualified name consisting of alphanumeric characters, '-', '_' or '.', and must start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc', regex used for validation is '([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]') with an optional DNS subdomain prefix and '/' (e.g. 'example.com/MyName') Required.

MatchCondition v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1MatchCondition
Other API versions of this object exist: v1 v1beta1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. Must evaluate to bool. CEL expressions have access to the contents of the AdmissionRequest and Authorizer, organized into CEL variables: 'object' - The object from the incoming request. The value is null for DELETE requests. 'oldObject' - The existing object. The value is null for CREATE requests. 'request' - Attributes of the admission request(/pkg/apis/admission/types.go#AdmissionRequest). 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/ Required.
name
string
Name is an identifier for this match condition, used for strategic merging of MatchConditions, as well as providing an identifier for logging purposes. A good name should be descriptive of the associated expression. Name must be a qualified name consisting of alphanumeric characters, '-', '_' or '.', and must start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc', regex used for validation is '([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]') with an optional DNS subdomain prefix and '/' (e.g. 'example.com/MyName') Required.

MatchResources v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1MatchResources
Other API versions of this object exist: v1 v1alpha1
FieldDescription
excludeResourceRules
NamedRuleWithOperations array
ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
matchPolicy
string
matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
namespaceSelector
LabelSelector
NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
objectSelector
LabelSelector
ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
resourceRules
NamedRuleWithOperations array
ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

MatchResources v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1MatchResources
Other API versions of this object exist: v1 v1beta1
FieldDescription
excludeResourceRules
NamedRuleWithOperations array
ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about. The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
matchPolicy
string
matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"
namespaceSelector
LabelSelector
NamespaceSelector decides whether to run the admission control policy on an object based on whether the namespace for that object matches the selector. If the object itself is a namespace, the matching is performed on object.metadata.labels. If the object is another cluster scoped resource, it never skips the policy. For example, to run the webhook on any objects whose namespace is not associated with "runlevel" of "0" or "1"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "runlevel", "operator": "NotIn", "values": [ "0", "1" ] } ] } If instead you want to only run the policy on any objects whose namespace is associated with the "environment" of "prod" or "staging"; you will set the selector as follows: "namespaceSelector": { "matchExpressions": [ { "key": "environment", "operator": "In", "values": [ "prod", "staging" ] } ] } See https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ for more examples of label selectors. Default to the empty LabelSelector, which matches everything.
objectSelector
LabelSelector
ObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.
resourceRules
NamedRuleWithOperations array
ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches. The policy cares about an operation if it matches _any_ Rule.

NamedRuleWithOperations v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1NamedRuleWithOperations
Other API versions of this object exist: v1 v1alpha1
FieldDescription
apiGroups
string array
APIGroups is the API groups the resources belong to. '\*' is all groups. If '\*' is present, the length of the slice must be one. Required.
apiVersions
string array
APIVersions is the API versions the resources belong to. '\*' is all versions. If '\*' is present, the length of the slice must be one. Required.
operations
string array
Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '\*' is present, the length of the slice must be one. Required.
resourceNames
string array
ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
resources
string array
Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '\*' means all resources, but not subresources. 'pods/\*' means all subresources of pods. '\*/scale' means all scale subresources. '\*/\*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
scope
string
scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "*" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "*" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NamedRuleWithOperations v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1NamedRuleWithOperations
Other API versions of this object exist: v1 v1beta1
FieldDescription
apiGroups
string array
APIGroups is the API groups the resources belong to. '\*' is all groups. If '\*' is present, the length of the slice must be one. Required.
apiVersions
string array
APIVersions is the API versions the resources belong to. '\*' is all versions. If '\*' is present, the length of the slice must be one. Required.
operations
string array
Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '\*' is present, the length of the slice must be one. Required.
resourceNames
string array
ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.
resources
string array
Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '\*' means all resources, but not subresources. 'pods/\*' means all subresources of pods. '\*/scale' means all scale subresources. '\*/\*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.
scope
string
scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "*" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "*" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".

NonResourcePolicyRule v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3NonResourcePolicyRule
Other API versions of this object exist: v1
FieldDescription
nonResourceURLs
string array
`nonResourceURLs` is a set of url prefixes that a user should have access to and may not be empty. For example: - "/healthz" is legal - "/hea*" is illegal - "/hea" is legal but matches nothing - "/hea/*" also matches nothing - "/healthz/*" matches all per-component health checks. "*" matches all non-resource urls. if it is present, it must be the only entry. Required.
verbs
string array
`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs. If it is present, it must be the only entry. Required.

ParamKind v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1ParamKind
Other API versions of this object exist: v1 v1alpha1
FieldDescription
apiVersion
string
APIVersion is the API group version the resources belong to. In format of "group/version". Required.
kind
string
Kind is the API kind the resources belong to. Required.

ParamKind v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1ParamKind
Other API versions of this object exist: v1 v1beta1
FieldDescription
apiVersion
string
APIVersion is the API group version the resources belong to. In format of "group/version". Required.
kind
string
Kind is the API kind the resources belong to. Required.

ParamRef v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1ParamRef
Other API versions of this object exist: v1 v1alpha1
FieldDescription
name
string
name is the name of the resource being referenced. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset. A single parameter used for all admission requests can be configured by setting the `name` field, leaving `selector` blank, and setting namespace if `paramKind` is namespace-scoped.
namespace
string
namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
parameterNotFoundAction
string
`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Required
selector
LabelSelector
selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

ParamRef v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1ParamRef
Other API versions of this object exist: v1 v1beta1
FieldDescription
name
string
`name` is the name of the resource being referenced. `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.
namespace
string
namespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.
parameterNotFoundAction
string
`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Default to `Deny`
selector
LabelSelector
selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.

PolicyRulesWithSubjects v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3PolicyRulesWithSubjects
Other API versions of this object exist: v1
FieldDescription
nonResourceRules
NonResourcePolicyRule array
`nonResourceRules` is a list of NonResourcePolicyRules that identify matching requests according to their verb and the target non-resource URL.
resourceRules
ResourcePolicyRule array
`resourceRules` is a slice of ResourcePolicyRules that identify matching requests according to their verb and the target resource. At least one of `resourceRules` and `nonResourceRules` has to be non-empty.
subjects
Subject array
subjects is the list of normal user, serviceaccount, or group that this rule cares about. There must be at least one member in this slice. A slice that includes both the system:authenticated and system:unauthenticated user groups matches every request. Required.

PriorityLevelConfiguration v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3PriorityLevelConfiguration
Other API versions of this object exist: v1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec
PriorityLevelConfigurationSpec
`spec` is the specification of the desired behavior of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status
PriorityLevelConfigurationStatus
`status` is the current status of a "request-priority". More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

PriorityLevelConfigurationSpec v1beta3 flowcontrol

FieldDescription
exempt
ExemptPriorityLevelConfiguration
`exempt` specifies how requests are handled for an exempt priority level. This field MUST be empty if `type` is `"Limited"`. This field MAY be non-empty if `type` is `"Exempt"`. If empty and `type` is `"Exempt"` then the default values for `ExemptPriorityLevelConfiguration` apply.
limited
LimitedPriorityLevelConfiguration
`limited` specifies how requests are handled for a Limited priority level. This field must be non-empty if and only if `type` is `"Limited"`.
type
string
`type` indicates whether this priority level is subject to limitation on request execution. A value of `"Exempt"` means that requests of this priority level are not subject to a limit (and thus are never queued) and do not detract from the capacity made available to other priority levels. A value of `"Limited"` means that (a) requests of this priority level _are_ subject to limits and (b) some of the server's limited capacity is made available exclusively to this priority level. Required.

PriorityLevelConfigurationStatus v1beta3 flowcontrol

FieldDescription
conditions
PriorityLevelConfigurationCondition array
patch strategy: merge
patch merge key: type
`conditions` is the current state of "request-priority".

PriorityLevelConfigurationList v1beta3 flowcontrol

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
PriorityLevelConfiguration array
`items` is a list of request-priorities.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
`metadata` is the standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

Write Operations

Create

create a PriorityLevelConfiguration

HTTP Request

POST /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created
202
PriorityLevelConfiguration
Accepted

Patch

partially update the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Replace

replace the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Delete

delete a PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of PriorityLevelConfiguration

HTTP Request

DELETE /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PriorityLevelConfiguration
OK

List

list or watch objects of kind PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
PriorityLevelConfigurationList
OK

Watch

watch changes to an object of kind PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/watch/prioritylevelconfigurations/{name}

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of PriorityLevelConfiguration. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/watch/prioritylevelconfigurations

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified PriorityLevelConfiguration

HTTP Request

PATCH /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

Read Status

read status of the specified PriorityLevelConfiguration

HTTP Request

GET /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
PriorityLevelConfiguration
OK

Replace Status

replace status of the specified PriorityLevelConfiguration

HTTP Request

PUT /apis/flowcontrol.apiserver.k8s.io/v1beta3/prioritylevelconfigurations/{name}/status

Path Parameters

ParameterDescription
namename of the PriorityLevelConfiguration

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
PriorityLevelConfiguration

Response

CodeDescription
200
PriorityLevelConfiguration
OK
201
PriorityLevelConfiguration
Created

PriorityLevelConfigurationCondition v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3PriorityLevelConfigurationCondition
Other API versions of this object exist: v1
FieldDescription
lastTransitionTime
Time
`lastTransitionTime` is the last time the condition transitioned from one status to another.
message
string
`message` is a human-readable message indicating details about last transition.
reason
string
`reason` is a unique, one-word, CamelCase reason for the condition's last transition.
status
string
`status` is the status of the condition. Can be True, False, Unknown. Required.
type
string
`type` is the type of the condition. Required.

PriorityLevelConfigurationReference v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3PriorityLevelConfigurationReference
Other API versions of this object exist: v1
FieldDescription
name
string
`name` is the name of the priority level configuration being referenced Required.

QueuingConfiguration v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3QueuingConfiguration
Other API versions of this object exist: v1
FieldDescription
handSize
integer
`handSize` is a small positive number that configures the shuffle sharding of requests into queues. When enqueuing a request at this priority level the request's flow identifier (a string pair) is hashed and the hash value is used to shuffle the list of queues and deal a hand of the size specified here. The request is put into one of the shortest queues in that hand. `handSize` must be no larger than `queues`, and should be significantly smaller (so that a few heavy flows do not saturate most of the queues). See the user-facing documentation for more extensive guidance on setting this field. This field has a default value of 8.
queueLengthLimit
integer
`queueLengthLimit` is the maximum number of requests allowed to be waiting in a given queue of this priority level at a time; excess requests are rejected. This value must be positive. If not specified, it will be defaulted to 50.
queues
integer
`queues` is the number of queues for this priority level. The queues exist independently at each apiserver. The value must be positive. Setting it to 1 effectively precludes shufflesharding and thus makes the distinguisher method of associated flow schemas irrelevant. This field has a default value of 64.

ResourceClaim v1alpha2 resource.k8s.io

GroupVersionKind
resource.k8s.iov1alpha2ResourceClaim
Other API versions of this object exist: v1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata
spec
ResourceClaimSpec
Spec describes the desired attributes of a resource that then needs to be allocated. It can only be set once when creating the ResourceClaim.
status
ResourceClaimStatus
Status describes whether the resource is available and with which attributes.

ResourceClaimSpec v1alpha2 resource

FieldDescription
allocationMode
string
Allocation can start immediately or when a Pod wants to use the resource. "WaitForFirstConsumer" is the default.
parametersRef
ResourceClaimParametersReference
ParametersRef references a separate object with arbitrary parameters that will be used by the driver when allocating a resource for the claim. The object must be in the same namespace as the ResourceClaim.
resourceClassName
string
ResourceClassName references the driver and additional parameters via the name of a ResourceClass that was created as part of the driver deployment.

ResourceClaimStatus v1alpha2 resource

FieldDescription
allocation
AllocationResult
Allocation is set by the resource driver once a resource or set of resources has been allocated successfully. If this is not specified, the resources have not been allocated yet.
deallocationRequested
boolean
DeallocationRequested indicates that a ResourceClaim is to be deallocated. The driver then must deallocate this claim and reset the field together with clearing the Allocation field. While DeallocationRequested is set, no new consumers may be added to ReservedFor.
driverName
string
DriverName is a copy of the driver name from the ResourceClass at the time when allocation started.
reservedFor
ResourceClaimConsumerReference array
patch strategy: merge
patch merge key: uid
ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. There can be at most 32 such reservations. This may get increased in the future, but not reduced.

ResourceClaimList v1alpha2 resource

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ResourceClaim array
Items is the list of resource claims.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata

Write Operations

Create

create a ResourceClaim

HTTP Request

POST /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created
202
ResourceClaim
Accepted

Patch

partially update the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Replace

replace the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Delete

delete a ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
ResourceClaim
OK
202
ResourceClaim
Accepted

Delete Collection

delete collection of ResourceClaim

HTTP Request

DELETE /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaim
OK

List

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimList
OK

List All Namespaces

list or watch objects of kind ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/resourceclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ResourceClaimList
OK

Watch

watch changes to an object of kind ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaims/{name}

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/namespaces/{namespace}/resourceclaims

Path Parameters

ParameterDescription
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List All Namespaces

watch individual changes to a list of ResourceClaim. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/watch/resourceclaims

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ResourceClaim

HTTP Request

PATCH /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

Read Status

read status of the specified ResourceClaim

HTTP Request

GET /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ResourceClaim
OK

Replace Status

replace status of the specified ResourceClaim

HTTP Request

PUT /apis/resource.k8s.io/v1alpha2/namespaces/{namespace}/resourceclaims/{name}/status

Path Parameters

ParameterDescription
namename of the ResourceClaim
namespaceobject name and auth scope, such as for teams and projects

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ResourceClaim

Response

CodeDescription
200
ResourceClaim
OK
201
ResourceClaim
Created

ResourcePolicyRule v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3ResourcePolicyRule
Other API versions of this object exist: v1
FieldDescription
apiGroups
string array
`apiGroups` is a list of matching API groups and may not be empty. "*" matches all API groups and, if present, must be the only entry. Required.
clusterScope
boolean
`clusterScope` indicates whether to match requests that do not specify a namespace (which happens either because the resource is not namespaced or the request targets all namespaces). If this field is omitted or false then the `namespaces` field must contain a non-empty list.
namespaces
string array
`namespaces` is a list of target namespaces that restricts matches. A request that specifies a target namespace matches only if either (a) this list contains that target namespace or (b) this list contains "*". Note that "*" matches any specified namespace but does not match a request that _does not specify_ a namespace (see the `clusterScope` field for that). This list may be empty, but only if `clusterScope` is true.
resources
string array
`resources` is a list of matching resources (i.e., lowercase and plural) with, if desired, subresource. For example, [ "services", "nodes/status" ]. This list may not be empty. "*" matches all resources and, if present, must be the only entry. Required.
verbs
string array
`verbs` is a list of matching verbs and may not be empty. "*" matches all verbs and, if present, must be the only entry. Required.

SelfSubjectReview v1beta1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1beta1SelfSubjectReview
Other API versions of this object exist: v1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
status
SelfSubjectReviewStatus
Status is filled in by the server with the user attributes.

SelfSubjectReviewStatus v1beta1 authentication

FieldDescription
userInfo
UserInfo
User attributes of the user making this request.

Write Operations

Create

create a SelfSubjectReview

HTTP Request

POST /apis/authentication.k8s.io/v1beta1/selfsubjectreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SelfSubjectReview

Response

CodeDescription
200
SelfSubjectReview
OK
201
SelfSubjectReview
Created
202
SelfSubjectReview
Accepted

SelfSubjectReview v1alpha1 authentication.k8s.io

GroupVersionKind
authentication.k8s.iov1alpha1SelfSubjectReview
Other API versions of this object exist: v1 v1beta1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
status
SelfSubjectReviewStatus
Status is filled in by the server with the user attributes.

SelfSubjectReviewStatus v1alpha1 authentication

FieldDescription
userInfo
UserInfo
User attributes of the user making this request.

Write Operations

Create

create a SelfSubjectReview

HTTP Request

POST /apis/authentication.k8s.io/v1alpha1/selfsubjectreviews

Query Parameters

ParameterDescription
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Body Parameters

ParameterDescription
body
SelfSubjectReview

Response

CodeDescription
200
SelfSubjectReview
OK
201
SelfSubjectReview
Created
202
SelfSubjectReview
Accepted

ServiceAccountSubject v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3ServiceAccountSubject
Other API versions of this object exist: v1
FieldDescription
name
string
`name` is the name of matching ServiceAccount objects, or "*" to match regardless of name. Required.
namespace
string
`namespace` is the namespace of matching ServiceAccount objects. Required.

ServiceReference v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1ServiceReference
FieldDescription
name
string
name is the name of the service. Required
namespace
string
namespace is the namespace of the service. Required
path
string
path is an optional URL path at which the webhook will be contacted.
port
integer
port is an optional service port at which the webhook will be contacted. `port` should be a valid port number (1-65535, inclusive). Defaults to 443 for backward compatibility.

ServiceReference v1 apiregistration.k8s.io

GroupVersionKind
apiregistration.k8s.iov1ServiceReference
FieldDescription
name
string
Name is the name of the service
namespace
string
Namespace is the namespace of the service
port
integer
If specified, the port on the service that hosting webhook. Default to 443 for backward compatibility. `port` should be a valid port number (1-65535, inclusive).

Subject v1 rbac.authorization.k8s.io

GroupVersionKind
rbac.authorization.k8s.iov1Subject
Other API versions of this object exist: v1beta3
FieldDescription
apiGroup
string
APIGroup holds the API group of the referenced subject. Defaults to "" for ServiceAccount subjects. Defaults to "rbac.authorization.k8s.io" for User and Group subjects.
kind
string
Kind of object being referenced. Values defined by this API group are "User", "Group", and "ServiceAccount". If the Authorizer does not recognized the kind value, the Authorizer should report an error.
name
string
Name of the object being referenced.
namespace
string
Namespace of the referenced object. If the object kind is non-namespace, such as "User" or "Group", and this value is not empty the Authorizer should report an error.

Subject v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3Subject
Other API versions of this object exist: v1 v1
FieldDescription
group
GroupSubject
`group` matches based on user group name.
kind
string
`kind` indicates which one of the other fields is non-empty. Required
serviceAccount
ServiceAccountSubject
`serviceAccount` matches ServiceAccounts.
user
UserSubject
`user` matches based on username.

TokenRequest v1 storage.k8s.io

GroupVersionKind
storage.k8s.iov1TokenRequest
FieldDescription
audience
string
audience is the intended audience of the token in "TokenRequestSpec". It will default to the audiences of kube apiserver.
expirationSeconds
integer
expirationSeconds is the duration of validity of the token in "TokenRequestSpec". It has the same default value of "ExpirationSeconds" in "TokenRequestSpec".

TypeChecking v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1TypeChecking
Other API versions of this object exist: v1 v1alpha1
FieldDescription
expressionWarnings
ExpressionWarning array
The type checking warnings for each expression.

TypeChecking v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1TypeChecking
Other API versions of this object exist: v1 v1beta1
FieldDescription
expressionWarnings
ExpressionWarning array
The type checking warnings for each expression.

UserSubject v1beta3 flowcontrol.apiserver.k8s.io

GroupVersionKind
flowcontrol.apiserver.k8s.iov1beta3UserSubject
Other API versions of this object exist: v1
FieldDescription
name
string
`name` is the username that matches, or "*" to match all usernames. Required.

ValidatingAdmissionPolicy v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1ValidatingAdmissionPolicy
Other API versions of this object exist: v1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicySpec
Specification of the desired behavior of the ValidatingAdmissionPolicy.
status
ValidatingAdmissionPolicyStatus
The status of the ValidatingAdmissionPolicy, including warnings that are useful to determine if the policy behaves in the expected way. Populated by the system. Read-only.

ValidatingAdmissionPolicySpec v1beta1 admissionregistration

FieldDescription
auditAnnotations
AuditAnnotation array
auditAnnotations contains CEL expressions which are used to produce audit annotations for the audit event of the API request. validations and auditAnnotations may not both be empty; a least one of validations or auditAnnotations is required.
failurePolicy
string
failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.
matchConditions
MatchCondition array
patch strategy: merge
patch merge key: name
MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
matchConstraints
MatchResources
MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.
paramKind
ParamKind
ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
validations
Validation array
Validations contain CEL expressions which is used to apply the validation. Validations and AuditAnnotations may not both be empty; a minimum of one Validations or AuditAnnotations is required.
variables
Variable array
patch strategy: merge
patch merge key: name
Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.

ValidatingAdmissionPolicyStatus v1beta1 admissionregistration

FieldDescription
conditions
Condition array
The conditions represent the latest available observations of a policy's current state.
observedGeneration
integer
The generation observed by the controller.
typeChecking
TypeChecking
The results of type checking for each expression. Presence of this field indicates the completion of the type checking.

ValidatingAdmissionPolicyList v1beta1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicy array
List of ValidatingAdmissionPolicy.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created
202
ValidatingAdmissionPolicy
Accepted

Patch

partially update the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Replace

replace the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Delete

delete a ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

List

list or watch objects of kind ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicies

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Read Status

read status of the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

Replace Status

replace status of the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

ValidatingAdmissionPolicy v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1ValidatingAdmissionPolicy
Other API versions of this object exist: v1 v1beta1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicySpec
Specification of the desired behavior of the ValidatingAdmissionPolicy.
status
ValidatingAdmissionPolicyStatus
The status of the ValidatingAdmissionPolicy, including warnings that are useful to determine if the policy behaves in the expected way. Populated by the system. Read-only.

ValidatingAdmissionPolicySpec v1alpha1 admissionregistration

FieldDescription
auditAnnotations
AuditAnnotation array
auditAnnotations contains CEL expressions which are used to produce audit annotations for the audit event of the API request. validations and auditAnnotations may not both be empty; a least one of validations or auditAnnotations is required.
failurePolicy
string
failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.
matchConditions
MatchCondition array
patch strategy: merge
patch merge key: name
MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skipped
matchConstraints
MatchResources
MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.
paramKind
ParamKind
ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
validations
Validation array
Validations contain CEL expressions which is used to apply the validation. Validations and AuditAnnotations may not both be empty; a minimum of one Validations or AuditAnnotations is required.
variables
Variable array
patch strategy: merge
patch merge key: name
Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.

ValidatingAdmissionPolicyStatus v1alpha1 admissionregistration

FieldDescription
conditions
Condition array
The conditions represent the latest available observations of a policy's current state.
observedGeneration
integer
The generation observed by the controller.
typeChecking
TypeChecking
The results of type checking for each expression. Presence of this field indicates the completion of the type checking.

ValidatingAdmissionPolicyList v1alpha1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicy array
List of ValidatingAdmissionPolicy.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicy

HTTP Request

POST /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created
202
ValidatingAdmissionPolicy
Accepted

Patch

partially update the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Replace

replace the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Delete

delete a ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicy

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

List

list or watch objects of kind ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/validatingadmissionpolicies/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicy. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/validatingadmissionpolicies

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Status Operations

Patch Status

partially update status of the specified ValidatingAdmissionPolicy

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

Read Status

read status of the specified ValidatingAdmissionPolicy

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK

Replace Status

replace status of the specified ValidatingAdmissionPolicy

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicies/{name}/status

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicy

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicy

Response

CodeDescription
200
ValidatingAdmissionPolicy
OK
201
ValidatingAdmissionPolicy
Created

ValidatingAdmissionPolicyBinding v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1ValidatingAdmissionPolicyBinding
Other API versions of this object exist: v1 v1alpha1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicyBindingSpec
Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.

ValidatingAdmissionPolicyBindingSpec v1beta1 admissionregistration

FieldDescription
matchResources
MatchResources
MatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
paramRef
ParamRef
paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
policyName
string
PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.
validationActions
string array
validationActions declares how Validations of the referenced ValidatingAdmissionPolicy are enforced. If a validation evaluates to false it is always enforced according to these actions. Failures defined by the ValidatingAdmissionPolicy's FailurePolicy are enforced according to these actions only if the FailurePolicy is set to Fail, otherwise the failures are ignored. This includes compilation errors, runtime errors and misconfigurations of the policy. validationActions is declared as a set of action values. Order does not matter. validationActions may not contain duplicates of the same action. The supported actions values are: "Deny" specifies that a validation failure results in a denied request. "Warn" specifies that a validation failure is reported to the request client in HTTP Warning headers, with a warning code of 299. Warnings can be sent both for allowed or denied admission responses. "Audit" specifies that a validation failure is included in the published audit event for the request. The audit event will contain a `validation.policy.admission.k8s.io/validation_failure` audit annotation with a value containing the details of the validation failures, formatted as a JSON list of objects, each with the following fields: - message: The validation failure message string - policy: The resource name of the ValidatingAdmissionPolicy - binding: The resource name of the ValidatingAdmissionPolicyBinding - expressionIndex: The index of the failed validations in the ValidatingAdmissionPolicy - validationActions: The enforcement actions enacted for the validation failure Example audit annotation: `"validation.policy.admission.k8s.io/validation_failure": "[{"message": "Invalid value", {"policy": "policy.example.com", {"binding": "policybinding.example.com", {"expressionIndex": "1", {"validationActions": ["Audit"]}]"` Clients should expect to handle additional values by ignoring any values not recognized. "Deny" and "Warn" may not be used together since this combination needlessly duplicates the validation failure both in the API response body and the HTTP warning headers. Required.

ValidatingAdmissionPolicyBindingList v1beta1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicyBinding array
List of PolicyBinding.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created
202
ValidatingAdmissionPolicyBinding
Accepted

Patch

partially update the specified ValidatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Replace

replace the specified ValidatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Delete

delete a ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK

List

list or watch objects of kind ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyBindingList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1beta1/watch/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

ValidatingAdmissionPolicyBinding v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1ValidatingAdmissionPolicyBinding
Other API versions of this object exist: v1 v1beta1
FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ObjectMeta
Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
spec
ValidatingAdmissionPolicyBindingSpec
Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.

ValidatingAdmissionPolicyBindingSpec v1alpha1 admissionregistration

FieldDescription
matchResources
MatchResources
MatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
paramRef
ParamRef
paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.
policyName
string
PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to. If the referenced resource does not exist, this binding is considered invalid and will be ignored Required.
validationActions
string array
validationActions declares how Validations of the referenced ValidatingAdmissionPolicy are enforced. If a validation evaluates to false it is always enforced according to these actions. Failures defined by the ValidatingAdmissionPolicy's FailurePolicy are enforced according to these actions only if the FailurePolicy is set to Fail, otherwise the failures are ignored. This includes compilation errors, runtime errors and misconfigurations of the policy. validationActions is declared as a set of action values. Order does not matter. validationActions may not contain duplicates of the same action. The supported actions values are: "Deny" specifies that a validation failure results in a denied request. "Warn" specifies that a validation failure is reported to the request client in HTTP Warning headers, with a warning code of 299. Warnings can be sent both for allowed or denied admission responses. "Audit" specifies that a validation failure is included in the published audit event for the request. The audit event will contain a `validation.policy.admission.k8s.io/validation_failure` audit annotation with a value containing the details of the validation failures, formatted as a JSON list of objects, each with the following fields: - message: The validation failure message string - policy: The resource name of the ValidatingAdmissionPolicy - binding: The resource name of the ValidatingAdmissionPolicyBinding - expressionIndex: The index of the failed validations in the ValidatingAdmissionPolicy - validationActions: The enforcement actions enacted for the validation failure Example audit annotation: `"validation.policy.admission.k8s.io/validation_failure": "[{"message": "Invalid value", {"policy": "policy.example.com", {"binding": "policybinding.example.com", {"expressionIndex": "1", {"validationActions": ["Audit"]}]"` Clients should expect to handle additional values by ignoring any values not recognized. "Deny" and "Warn" may not be used together since this combination needlessly duplicates the validation failure both in the API response body and the HTTP warning headers. Required.

ValidatingAdmissionPolicyBindingList v1alpha1 admissionregistration

FieldDescription
apiVersion
string
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
items
ValidatingAdmissionPolicyBinding array
List of PolicyBinding.
kind
string
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
metadata
ListMeta
Standard list metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

Write Operations

Create

create a ValidatingAdmissionPolicyBinding

HTTP Request

POST /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created
202
ValidatingAdmissionPolicyBinding
Accepted

Patch

partially update the specified ValidatingAdmissionPolicyBinding

HTTP Request

PATCH /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.
forceForce is going to "force" Apply requests. It means user will re-acquire conflicting fields owned by other people. Force flag must be unset for non-apply patch requests.

Body Parameters

ParameterDescription
body
Patch

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Replace

replace the specified ValidatingAdmissionPolicyBinding

HTTP Request

PUT /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldManagerfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint.
fieldValidationfieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

Body Parameters

ParameterDescription
body
ValidatingAdmissionPolicyBinding

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK
201
ValidatingAdmissionPolicyBinding
Created

Delete

delete a ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK
202
Status
Accepted

Delete Collection

delete collection of ValidatingAdmissionPolicyBinding

HTTP Request

DELETE /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
dryRunWhen present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
gracePeriodSecondsThe duration in seconds before the object should be deleted. Value must be non-negative integer. The value zero indicates delete immediately. If this value is nil, the default grace period for the specified type will be used. Defaults to a per object value if not specified. zero means delete immediately.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
orphanDependentsDeprecated: please use the PropagationPolicy, this field will be deprecated in 1.7. Should the dependent objects be orphaned. If true/false, the "orphan" finalizer will be added to/removed from the object's finalizers list. Either this field or PropagationPolicy may be set, but not both.
propagationPolicyWhether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.

Body Parameters

ParameterDescription
body
DeleteOptions

Response

CodeDescription
200
Status
OK

Read Operations

Read

read the specified ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).

Response

CodeDescription
200
ValidatingAdmissionPolicyBinding
OK

List

list or watch objects of kind ValidatingAdmissionPolicyBinding

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
ValidatingAdmissionPolicyBindingList
OK

Watch

watch changes to an object of kind ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead, filtered to a single item with the 'fieldSelector' parameter.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/validatingadmissionpolicybindings/{name}

Path Parameters

ParameterDescription
namename of the ValidatingAdmissionPolicyBinding

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Watch List

watch individual changes to a list of ValidatingAdmissionPolicyBinding. deprecated: use the 'watch' parameter with a list operation instead.

HTTP Request

GET /apis/admissionregistration.k8s.io/v1alpha1/watch/validatingadmissionpolicybindings

Query Parameters

ParameterDescription
allowWatchBookmarksallowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.
continueThe continue option should be set when retrieving more results from the server. Since this value is server defined, clients may only use the continue value from a previous query result with identical query parameters (except for the value of continue) and the server may reject a continue value it does not recognize. If the specified continue value is no longer valid whether due to expiration (generally five to fifteen minutes) or a configuration change on the server, the server will respond with a 410 ResourceExpired error together with a continue token. If the client needs a consistent list, it must restart their list without the continue field. Otherwise, the client may send another list request with the token received with the 410 error, the server will respond with a list starting from the next key, but from the latest snapshot, which is inconsistent from the previous list results - objects that are created, modified, or deleted after the first list request will be included in the response, as long as their keys are after the "next key". This field is not supported when watch is true. Clients may start a watch from the last resourceVersion value returned by the server and not miss any modifications.
fieldSelectorA selector to restrict the list of returned objects by their fields. Defaults to everything.
labelSelectorA selector to restrict the list of returned objects by their labels. Defaults to everything.
limitlimit is a maximum number of responses to return for a list call. If more items exist, the server will set the `continue` field on the list metadata to a value that can be used with the same initial query to retrieve the next set of results. Setting a limit may return fewer than the requested amount of items (up to zero items) in the event all requested objects are filtered out and clients should only use the presence of the continue field to determine whether more results are available. Servers may choose not to support the limit argument and will return all of the available results. If limit is specified and the continue field is empty, clients may assume that no more results are available. This field is not supported if watch is true. The server guarantees that the objects returned when using continue will be identical to issuing a single list call without a limit - that is, no objects created, modified, or deleted after the first request is issued will be included in any subsequent continued requests. This is sometimes referred to as a consistent snapshot, and ensures that a client that is using limit to receive smaller chunks of a very large result can ensure they see all possible objects. If objects are updated during a chunked list the version of the object that was present at the time the first list result was calculated is returned.
prettyIf 'true', then the output is pretty printed. Defaults to 'false' unless the user-agent indicates a browser or command-line HTTP tool (curl and wget).
resourceVersionresourceVersion sets a constraint on what resource versions a request may be served from. See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
resourceVersionMatchresourceVersionMatch determines how resourceVersion is applied to list calls. It is highly recommended that resourceVersionMatch be set for list calls where resourceVersion is set See https://kubernetes.io/docs/reference/using-api/api-concepts/#resource-versions for details. Defaults to unset
sendInitialEvents`sendInitialEvents=true` may be set together with `watch=true`. In that case, the watch stream will begin with synthetic events to produce the current state of objects in the collection. Once all such events have been sent, a synthetic "Bookmark" event will be sent. The bookmark will report the ResourceVersion (RV) corresponding to the set of objects, and be marked with `"k8s.io/initial-events-end": "true"` annotation. Afterwards, the watch stream will proceed as usual, sending watch events corresponding to changes (subsequent to the RV) to objects watched. When `sendInitialEvents` option is set, we require `resourceVersionMatch` option to also be set. The semantic of the watch request is as following: - `resourceVersionMatch` = NotOlderThan is interpreted as "data at least as new as the provided `resourceVersion`" and the bookmark event is send when the state is synced to a `resourceVersion` at least as fresh as the one provided by the ListOptions. If `resourceVersion` is unset, this is interpreted as "consistent read" and the bookmark event is send when the state is synced at least to the moment when request started being processed. - `resourceVersionMatch` set to any other value or unset Invalid error is returned. Defaults to true if `resourceVersion=""` or `resourceVersion="0"` (for backward compatibility reasons) and to false otherwise.
timeoutSecondsTimeout for the list/watch call. This limits the duration of the call, regardless of any activity or inactivity.
watchWatch for changes to the described resources and return them as a stream of add, update, and remove notifications. Specify resourceVersion.

Response

CodeDescription
200
WatchEvent
OK

Validation v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1Validation
Other API versions of this object exist: v1 v1alpha1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec CEL expressions have access to the contents of the API request/response, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"} - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"} - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"} Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. Required.
message
string
Message represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".
messageExpression
string
messageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a validation, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the `expression` except for 'authorizer' and 'authorizer.requestResource'. Example: "object.x must be less than max ("+string(params.max)+")"
reason
string
Reason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.

Validation v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1Validation
Other API versions of this object exist: v1 v1beta1
FieldDescription
expression
string
Expression represents the expression which will be evaluated by CEL. ref: https://github.com/google/cel-spec CEL expressions have access to the contents of the API request/response, organized into CEL variables as well as some other useful variables: - 'object' - The object from the incoming request. The value is null for DELETE requests. - 'oldObject' - The existing object. The value is null for CREATE requests. - 'request' - Attributes of the API request([ref](/pkg/apis/admission/types.go#AdmissionRequest)). - 'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind. - 'namespaceObject' - The namespace object that the incoming object belongs to. The value is null for cluster-scoped resources. - 'variables' - Map of composited variables, from its name to its lazily evaluated value. For example, a variable named 'foo' can be accessed as 'variables.foo'. - 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz - 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the object. No other metadata properties are accessible. Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible. Accessible property names are escaped according to the following rules when accessed in the expression: - '__' escapes to '__underscores__' - '.' escapes to '__dot__' - '-' escapes to '__dash__' - '/' escapes to '__slash__' - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are: "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if", "import", "let", "loop", "package", "namespace", "return". Examples: - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"} - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"} - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"} Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type: - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and non-intersecting elements in `Y` are appended, retaining their partial order. - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with non-intersecting keys are appended, retaining their partial order. Required.
message
string
Message represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".
messageExpression
string
messageExpression declares a CEL expression that evaluates to the validation failure message that is returned when this rule fails. Since messageExpression is used as a failure message, it must evaluate to a string. If both message and messageExpression are present on a validation, then messageExpression will be used if validation fails. If messageExpression results in a runtime error, the runtime error is logged, and the validation failure message is produced as if the messageExpression field were unset. If messageExpression evaluates to an empty string, a string with only spaces, or a string that contains line breaks, then the validation failure message will also be produced as if the messageExpression field were unset, and the fact that messageExpression produced an empty string/string with only spaces/string with line breaks will be logged. messageExpression has access to all the same variables as the `expression` except for 'authorizer' and 'authorizer.requestResource'. Example: "object.x must be less than max ("+string(params.max)+")"
reason
string
Reason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.

Variable v1beta1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1beta1Variable
Other API versions of this object exist: v1 v1alpha1
FieldDescription
expression
string
Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
name
string
Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

Variable v1alpha1 admissionregistration.k8s.io

GroupVersionKind
admissionregistration.k8s.iov1alpha1Variable
Other API versions of this object exist: v1 v1beta1
FieldDescription
expression
string
Expression is the expression that will be evaluated as the value of the variable. The CEL expression has access to the same identifiers as the CEL expressions in Validation.
name
string
Name is the name of the variable. The name must be a valid CEL identifier and unique among all variables. The variable can be accessed in other expressions through `variables` For example, if name is "foo", the variable will be available as `variables.foo`

WebhookClientConfig v1 apiextensions.k8s.io

GroupVersionKind
apiextensions.k8s.iov1WebhookClientConfig
FieldDescription
caBundle
string
caBundle is a PEM encoded CA bundle which will be used to validate the webhook's server certificate. If unspecified, system trust roots on the apiserver are used.
service
ServiceReference
service is a reference to the service for this webhook. Either service or url must be specified. If the webhook is running within the cluster, then you should use `service`.
url
string
url gives the location of the webhook, in standard URL form (`scheme://host:port/path`). Exactly one of `url` or `service` must be specified. The `host` should not refer to a service running in the cluster; use the `service` field instead. The host might be resolved via external DNS in some apiservers (e.g., `kube-apiserver` cannot resolve in-cluster DNS as that would be a layering violation). `host` may also be an IP address. Please note that using `localhost` or `127.0.0.1` as a `host` is risky unless you take great care to run this webhook on all hosts which run an apiserver which might need to make calls to this webhook. Such installs are likely to be non-portable, i.e., not easy to turn up in a new cluster. The scheme must be "https"; the URL must begin with "https://". A path is optional, and if present may be any string permissible in a URL. You may use the path to pass an arbitrary string to the webhook, for example, a cluster identifier. Attempting to use a user or basic auth e.g. "user:password@" is not allowed. Fragments ("#...") and query parameters ("?...") are not allowed, either.