Restrict a Container's Access to Resources with AppArmor
Kubernetes v1.31 [stable]
This page shows you how to load AppArmor profiles on your nodes and enforce those profiles in Pods. To learn more about how Kubernetes can confine Pods using AppArmor, see Linux kernel security constraints for Pods and containers.
Objectives
- See an example of how to load a profile on a Node
- Learn how to enforce the profile on a Pod
- Learn how to check that the profile is loaded
- See what happens when a profile is violated
- See what happens when a profile cannot be loaded
Before you begin
AppArmor is an optional kernel module and Kubernetes feature, so verify it is supported on your Nodes before proceeding:
AppArmor kernel module is enabled -- For the Linux kernel to enforce an AppArmor profile, the AppArmor kernel module must be installed and enabled. Several distributions enable the module by default, such as Ubuntu and SUSE, and many others provide optional support. To check whether the module is enabled, check the
/sys/module/apparmor/parameters/enabled
file:cat /sys/module/apparmor/parameters/enabled Y
The kubelet verifies that AppArmor is enabled on the host before admitting a pod with AppArmor explicitly configured.
Container runtime supports AppArmor -- All common Kubernetes-supported container runtimes should support AppArmor, including containerd and CRI-O. Please refer to the corresponding runtime documentation and verify that the cluster fulfills the requirements to use AppArmor.
Profile is loaded -- AppArmor is applied to a Pod by specifying an AppArmor profile that each container should be run with. If any of the specified profiles are not loaded in the kernel, the kubelet will reject the Pod. You can view which profiles are loaded on a node by checking the
/sys/kernel/security/apparmor/profiles
file. For example:ssh gke-test-default-pool-239f5d02-gyn2 "sudo cat /sys/kernel/security/apparmor/profiles | sort"
apparmor-test-deny-write (enforce) apparmor-test-audit-write (enforce) docker-default (enforce) k8s-nginx (enforce)
For more details on loading profiles on nodes, see Setting up nodes with profiles.
Securing a Pod
Note:
Prior to Kubernetes v1.30, AppArmor was specified through annotations. Use the documentation version selector to view the documentation with this deprecated API.AppArmor profiles can be specified at the pod level or container level. The container AppArmor profile takes precedence over the pod profile.
securityContext:
appArmorProfile:
type: <profile_type>
Where <profile_type>
is one of:
RuntimeDefault
to use the runtime's default profileLocalhost
to use a profile loaded on the host (see below)Unconfined
to run without AppArmor
See Specifying AppArmor Confinement for full details on the AppArmor profile API.
To verify that the profile was applied, you can check that the container's root process is running with the correct profile by examining its proc attr:
kubectl exec <pod_name> -- cat /proc/1/attr/current
The output should look something like this:
cri-containerd.apparmor.d (enforce)
Example
This example assumes you have already set up a cluster with AppArmor support.
First, load the profile you want to use onto your Nodes. This profile blocks all file write operations:
#include <tunables/global>
profile k8s-apparmor-example-deny-write flags=(attach_disconnected) {
#include <abstractions/base>
file,
# Deny all file writes.
deny /** w,
}
The profile needs to be loaded onto all nodes, since you don't know where the pod will be scheduled. For this example you can use SSH to install the profiles, but other approaches are discussed in Setting up nodes with profiles.
# This example assumes that node names match host names, and are reachable via SSH.
NODES=($(kubectl get nodes -o name))
for NODE in ${NODES[*]}; do ssh $NODE 'sudo apparmor_parser -q <<EOF
#include <tunables/global>
profile k8s-apparmor-example-deny-write flags=(attach_disconnected) {
#include <abstractions/base>
file,
# Deny all file writes.
deny /** w,
}
EOF'
done
Next, run a simple "Hello AppArmor" Pod with the deny-write profile:
apiVersion: v1
kind: Pod
metadata:
name: hello-apparmor
spec:
securityContext:
appArmorProfile:
type: Localhost
localhostProfile: k8s-apparmor-example-deny-write
containers:
- name: hello
image: busybox:1.28
command: [ "sh", "-c", "echo 'Hello AppArmor!' && sleep 1h" ]
kubectl create -f hello-apparmor.yaml
You can verify that the container is actually running with that profile by checking /proc/1/attr/current
:
kubectl exec hello-apparmor -- cat /proc/1/attr/current
The output should be:
k8s-apparmor-example-deny-write (enforce)
Finally, you can see what happens if you violate the profile by writing to a file:
kubectl exec hello-apparmor -- touch /tmp/test
touch: /tmp/test: Permission denied
error: error executing remote command: command terminated with non-zero exit code: Error executing in Docker Container: 1
To wrap up, see what happens if you try to specify a profile that hasn't been loaded:
kubectl create -f /dev/stdin <<EOF
apiVersion: v1
kind: Pod
metadata:
name: hello-apparmor-2
spec:
securityContext:
appArmorProfile:
type: Localhost
localhostProfile: k8s-apparmor-example-allow-write
containers:
- name: hello
image: busybox:1.28
command: [ "sh", "-c", "echo 'Hello AppArmor!' && sleep 1h" ]
EOF
pod/hello-apparmor-2 created
Although the Pod was created successfully, further examination will show that it is stuck in pending:
kubectl describe pod hello-apparmor-2
Name: hello-apparmor-2
Namespace: default
Node: gke-test-default-pool-239f5d02-x1kf/10.128.0.27
Start Time: Tue, 30 Aug 2016 17:58:56 -0700
Labels: <none>
Annotations: container.apparmor.security.beta.kubernetes.io/hello=localhost/k8s-apparmor-example-allow-write
Status: Pending
...
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 10s default-scheduler Successfully assigned default/hello-apparmor to gke-test-default-pool-239f5d02-x1kf
Normal Pulled 8s kubelet Successfully pulled image "busybox:1.28" in 370.157088ms (370.172701ms including waiting)
Normal Pulling 7s (x2 over 9s) kubelet Pulling image "busybox:1.28"
Warning Failed 7s (x2 over 8s) kubelet Error: failed to get container spec opts: failed to generate apparmor spec opts: apparmor profile not found k8s-apparmor-example-allow-write
Normal Pulled 7s kubelet Successfully pulled image "busybox:1.28" in 90.980331ms (91.005869ms including waiting)
An Event provides the error message with the reason, the specific wording is runtime-dependent:
Warning Failed 7s (x2 over 8s) kubelet Error: failed to get container spec opts: failed to generate apparmor spec opts: apparmor profile not found
Administration
Setting up Nodes with profiles
Kubernetes 1.31 does not provide any built-in mechanisms for loading AppArmor profiles onto Nodes. Profiles can be loaded through custom infrastructure or tools like the Kubernetes Security Profiles Operator.
The scheduler is not aware of which profiles are loaded onto which Node, so the full set of profiles must be loaded onto every Node. An alternative approach is to add a Node label for each profile (or class of profiles) on the Node, and use a node selector to ensure the Pod is run on a Node with the required profile.
Authoring Profiles
Getting AppArmor profiles specified correctly can be a tricky business. Fortunately there are some tools to help with that:
aa-genprof
andaa-logprof
generate profile rules by monitoring an application's activity and logs, and admitting the actions it takes. Further instructions are provided by the AppArmor documentation.- bane is an AppArmor profile generator for Docker that uses a simplified profile language.
To debug problems with AppArmor, you can check the system logs to see what, specifically, was
denied. AppArmor logs verbose messages to dmesg
, and errors can usually be found in the system
logs or through journalctl
. More information is provided in
AppArmor failures.
Specifying AppArmor confinement
Caution:
Prior to Kubernetes v1.30, AppArmor was specified through annotations. Use the documentation version selector to view the documentation with this deprecated API.AppArmor profile within security context
You can specify the appArmorProfile
on either a container's securityContext
or on a Pod's
securityContext
. If the profile is set at the pod level, it will be used as the default profile
for all containers in the pod (including init, sidecar, and ephemeral containers). If both a pod & container
AppArmor profile are set, the container's profile will be used.
An AppArmor profile has 2 fields:
type
(required) - indicates which kind of AppArmor profile will be applied. Valid options are:
Localhost
- a profile pre-loaded on the node (specified by
localhostProfile
). RuntimeDefault
- the container runtime's default profile.
Unconfined
- no AppArmor enforcement.
localhostProfile
- The name of a profile loaded on the node that should be used.
The profile must be preconfigured on the node to work.
This option must be provided if and only if the type
is Localhost
.
What's next
Additional resources: