Migrate from PodSecurityPolicy to the Built-In PodSecurity Admission Controller
This page describes the process of migrating from PodSecurityPolicies to the built-in PodSecurity
admission controller. This can be done effectively using a combination of dry-run and audit
and
warn
modes, although this becomes harder if mutating PSPs are used.
Before you begin
Your Kubernetes server must be at or later than version v1.22.
To check the version, enter kubectl version
.
If you are currently running a version of Kubernetes other than 1.31, you may want to switch to viewing this page in the documentation for the version of Kubernetes that you are actually running.
This page assumes you are already familiar with the basic Pod Security Admission concepts.
Overall approach
There are multiple strategies you can take for migrating from PodSecurityPolicy to Pod Security Admission. The following steps are one possible migration path, with a goal of minimizing both the risks of a production outage and of a security gap.
- Decide whether Pod Security Admission is the right fit for your use case.
- Review namespace permissions
- Simplify & standardize PodSecurityPolicies
- Update namespaces
- Identify an appropriate Pod Security level
- Verify the Pod Security level
- Enforce the Pod Security level
- Bypass PodSecurityPolicy
- Review namespace creation processes
- Disable PodSecurityPolicy
0. Decide whether Pod Security Admission is right for you
Pod Security Admission was designed to meet the most common security needs out of the box, and to provide a standard set of security levels across clusters. However, it is less flexible than PodSecurityPolicy. Notably, the following features are supported by PodSecurityPolicy but not Pod Security Admission:
- Setting default security constraints - Pod Security Admission is a non-mutating admission controller, meaning it won't modify pods before validating them. If you were relying on this aspect of PSP, you will need to either modify your workloads to meet the Pod Security constraints, or use a Mutating Admission Webhook to make those changes. See Simplify & Standardize PodSecurityPolicies below for more detail.
- Fine-grained control over policy definition - Pod Security Admission only supports 3 standard levels. If you require more control over specific constraints, then you will need to use a Validating Admission Webhook to enforce those policies.
- Sub-namespace policy granularity - PodSecurityPolicy lets you bind different policies to different Service Accounts or users, even within a single namespace. This approach has many pitfalls and is not recommended, but if you require this feature anyway you will need to use a 3rd party webhook instead. The exception to this is if you only need to completely exempt specific users or RuntimeClasses, in which case Pod Security Admission does expose some static configuration for exemptions.
Even if Pod Security Admission does not meet all of your needs it was designed to be complementary to other policy enforcement mechanisms, and can provide a useful fallback running alongside other admission webhooks.
1. Review namespace permissions
Pod Security Admission is controlled by labels on namespaces. This means that anyone who can update (or patch or create) a namespace can also modify the Pod Security level for that namespace, which could be used to bypass a more restrictive policy. Before proceeding, ensure that only trusted, privileged users have these namespace permissions. It is not recommended to grant these powerful permissions to users that shouldn't have elevated permissions, but if you must you will need to use an admission webhook to place additional restrictions on setting Pod Security labels on Namespace objects.
2. Simplify & standardize PodSecurityPolicies
In this section, you will reduce mutating PodSecurityPolicies and remove options that are outside
the scope of the Pod Security Standards. You should make the changes recommended here to an offline
copy of the original PodSecurityPolicy being modified. The cloned PSP should have a different
name that is alphabetically before the original (for example, prepend a 0
to it). Do not create the
new policies in Kubernetes yet - that will be covered in the Rollout the updated
policies section below.
2.a. Eliminate purely mutating fields
If a PodSecurityPolicy is mutating pods, then you could end up with pods that don't meet the Pod Security level requirements when you finally turn PodSecurityPolicy off. In order to avoid this, you should eliminate all PSP mutation prior to switching over. Unfortunately PSP does not cleanly separate mutating & validating fields, so this is not a straightforward migration.
You can start by eliminating the fields that are purely mutating, and don't have any bearing on the validating policy. These fields (also listed in the Mapping PodSecurityPolicies to Pod Security Standards reference) are:
.spec.defaultAllowPrivilegeEscalation
.spec.runtimeClass.defaultRuntimeClassName
.metadata.annotations['seccomp.security.alpha.kubernetes.io/defaultProfileName']
.metadata.annotations['apparmor.security.beta.kubernetes.io/defaultProfileName']
.spec.defaultAddCapabilities
- Although technically a mutating & validating field, these should be merged into.spec.allowedCapabilities
which performs the same validation without mutation.
Caution:
Removing these could result in workloads missing required configuration, and cause problems. See Rollout the updated policies below for advice on how to roll these changes out safely.2.b. Eliminate options not covered by the Pod Security Standards
There are several fields in PodSecurityPolicy that are not covered by the Pod Security Standards. If you must enforce these options, you will need to supplement Pod Security Admission with an admission webhook, which is outside the scope of this guide.
First, you can remove the purely validating fields that the Pod Security Standards do not cover. These fields (also listed in the Mapping PodSecurityPolicies to Pod Security Standards reference with "no opinion") are:
.spec.allowedHostPaths
.spec.allowedFlexVolumes
.spec.allowedCSIDrivers
.spec.forbiddenSysctls
.spec.runtimeClass
You can also remove the following fields, that are related to POSIX / UNIX group controls.
Caution:
If any of these use theMustRunAs
strategy they may be mutating! Removing these could result in
workloads not setting the required groups, and cause problems. See
Rollout the updated policies below for advice on how to roll these changes
out safely..spec.runAsGroup
.spec.supplementalGroups
.spec.fsGroup
The remaining mutating fields are required to properly support the Pod Security Standards, and will need to be handled on a case-by-case basis later:
.spec.requiredDropCapabilities
- Required to dropALL
for the Restricted profile..spec.seLinux
- (Only mutating with theMustRunAs
rule) required to enforce the SELinux requirements of the Baseline & Restricted profiles..spec.runAsUser
- (Non-mutating with theRunAsAny
rule) required to enforceRunAsNonRoot
for the Restricted profile..spec.allowPrivilegeEscalation
- (Only mutating if set tofalse
) required for the Restricted profile.
2.c. Rollout the updated PSPs
Next, you can rollout the updated policies to your cluster. You should proceed with caution, as removing the mutating options may result in workloads missing required configuration.
For each updated PodSecurityPolicy:
- Identify pods running under the original PSP. This can be done using the
kubernetes.io/psp
annotation. For example, using kubectl:PSP_NAME="original" # Set the name of the PSP you're checking for kubectl get pods --all-namespaces -o jsonpath="{range .items[?(@.metadata.annotations.kubernetes\.io\/psp=='$PSP_NAME')]}{.metadata.namespace} {.metadata.name}{'\n'}{end}"
- Compare these running pods against the original pod spec to determine whether PodSecurityPolicy
has modified the pod. For pods created by a workload resource
you can compare the pod with the PodTemplate in the controller resource. If any changes are
identified, the original Pod or PodTemplate should be updated with the desired configuration.
The fields to review are:
.metadata.annotations['container.apparmor.security.beta.kubernetes.io/*']
(replace * with each container name).spec.runtimeClassName
.spec.securityContext.fsGroup
.spec.securityContext.seccompProfile
.spec.securityContext.seLinuxOptions
.spec.securityContext.supplementalGroups
- On containers, under
.spec.containers[*]
and.spec.initContainers[*]
:.securityContext.allowPrivilegeEscalation
.securityContext.capabilities.add
.securityContext.capabilities.drop
.securityContext.readOnlyRootFilesystem
.securityContext.runAsGroup
.securityContext.runAsNonRoot
.securityContext.runAsUser
.securityContext.seccompProfile
.securityContext.seLinuxOptions
- Create the new PodSecurityPolicies. If any Roles or ClusterRoles are granting
use
on all PSPs this could cause the new PSPs to be used instead of their mutating counter-parts. - Update your authorization to grant access to the new PSPs. In RBAC this means updating any Roles
or ClusterRoles that grant the
use
permission on the original PSP to also grant it to the updated PSP. - Verify: after some soak time, rerun the command from step 1 to see if any pods are still using the original PSPs. Note that pods need to be recreated after the new policies have been rolled out before they can be fully verified.
- (optional) Once you have verified that the original PSPs are no longer in use, you can delete them.
3. Update Namespaces
The following steps will need to be performed on every namespace in the cluster. Commands referenced
in these steps use the $NAMESPACE
variable to refer to the namespace being updated.
3.a. Identify an appropriate Pod Security level
Start reviewing the Pod Security Standards and familiarizing yourself with the 3 different levels.
There are several ways to choose a Pod Security level for your namespace:
- By security requirements for the namespace - If you are familiar with the expected access level for the namespace, you can choose an appropriate level based on those requirements, similar to how one might approach this on a new cluster.
- By existing PodSecurityPolicies - Using the
Mapping PodSecurityPolicies to Pod Security Standards
reference you can map each
PSP to a Pod Security Standard level. If your PSPs aren't based on the Pod Security Standards, you
may need to decide between choosing a level that is at least as permissive as the PSP, and a
level that is at least as restrictive. You can see which PSPs are in use for pods in a given
namespace with this command:
kubectl get pods -n $NAMESPACE -o jsonpath="{.items[*].metadata.annotations.kubernetes\.io\/psp}" | tr " " "\n" | sort -u
- By existing pods - Using the strategies under Verify the Pod Security level, you can test out both the Baseline and Restricted levels to see whether they are sufficiently permissive for existing workloads, and chose the least-privileged valid level.
Caution:
Options 2 & 3 above are based on existing pods, and may miss workloads that aren't currently running, such as CronJobs, scale-to-zero workloads, or other workloads that haven't rolled out.3.b. Verify the Pod Security level
Once you have selected a Pod Security level for the namespace (or if you're trying several), it's a good idea to test it out first (you can skip this step if using the Privileged level). Pod Security includes several tools to help test and safely roll out profiles.
First, you can dry-run the policy, which will evaluate pods currently running in the namespace against the applied policy, without making the new policy take effect:
# $LEVEL is the level to dry-run, either "baseline" or "restricted".
kubectl label --dry-run=server --overwrite ns $NAMESPACE pod-security.kubernetes.io/enforce=$LEVEL
This command will return a warning for any existing pods that are not valid under the proposed level.
The second option is better for catching workloads that are not currently running: audit mode. When running under audit-mode (as opposed to enforcing), pods that violate the policy level are recorded in the audit logs, which can be reviewed later after some soak time, but are not forbidden. Warning mode works similarly, but returns the warning to the user immediately. You can set the audit level on a namespace with this command:
kubectl label --overwrite ns $NAMESPACE pod-security.kubernetes.io/audit=$LEVEL
If either of these approaches yield unexpected violations, you will need to either update the violating workloads to meet the policy requirements, or relax the namespace Pod Security level.
3.c. Enforce the Pod Security level
When you are satisfied that the chosen level can safely be enforced on the namespace, you can update the namespace to enforce the desired level:
kubectl label --overwrite ns $NAMESPACE pod-security.kubernetes.io/enforce=$LEVEL
3.d. Bypass PodSecurityPolicy
Finally, you can effectively bypass PodSecurityPolicy at the namespace level by binding the fully privileged PSP to all service accounts in the namespace.
# The following cluster-scoped commands are only needed once.
kubectl apply -f privileged-psp.yaml
kubectl create clusterrole privileged-psp --verb use --resource podsecuritypolicies.policy --resource-name privileged
# Per-namespace disable
kubectl create -n $NAMESPACE rolebinding disable-psp --clusterrole privileged-psp --group system:serviceaccounts:$NAMESPACE
Since the privileged PSP is non-mutating, and the PSP admission controller always prefers non-mutating PSPs, this will ensure that pods in this namespace are no longer being modified or restricted by PodSecurityPolicy.
The advantage to disabling PodSecurityPolicy on a per-namespace basis like this is if a problem arises you can easily roll the change back by deleting the RoleBinding. Just make sure the pre-existing PodSecurityPolicies are still in place!
# Undo PodSecurityPolicy disablement.
kubectl delete -n $NAMESPACE rolebinding disable-psp
4. Review namespace creation processes
Now that existing namespaces have been updated to enforce Pod Security Admission, you should ensure that your processes and/or policies for creating new namespaces are updated to ensure that an appropriate Pod Security profile is applied to new namespaces.
You can also statically configure the Pod Security admission controller to set a default enforce, audit, and/or warn level for unlabeled namespaces. See Configure the Admission Controller for more information.
5. Disable PodSecurityPolicy
Finally, you're ready to disable PodSecurityPolicy. To do so, you will need to modify the admission configuration of the API server: How do I turn off an admission controller?.
To verify that the PodSecurityPolicy admission controller is no longer enabled, you can manually run a test by impersonating a user without access to any PodSecurityPolicies (see the PodSecurityPolicy example), or by verifying in the API server logs. At startup, the API server outputs log lines listing the loaded admission controller plugins:
I0218 00:59:44.903329 13 plugins.go:158] Loaded 16 mutating admission controller(s) successfully in the following order: NamespaceLifecycle,LimitRanger,ServiceAccount,NodeRestriction,TaintNodesByCondition,Priority,DefaultTolerationSeconds,ExtendedResourceToleration,PersistentVolumeLabel,DefaultStorageClass,StorageObjectInUseProtection,RuntimeClass,DefaultIngressClass,MutatingAdmissionWebhook.
I0218 00:59:44.903350 13 plugins.go:161] Loaded 14 validating admission controller(s) successfully in the following order: LimitRanger,ServiceAccount,PodSecurity,Priority,PersistentVolumeClaimResize,RuntimeClass,CertificateApproval,CertificateSigning,CertificateSubjectRestriction,DenyServiceExternalIPs,ValidatingAdmissionWebhook,ResourceQuota.
You should see PodSecurity
(in the validating admission controllers), and neither list should
contain PodSecurityPolicy
.
Once you are certain the PSP admission controller is disabled (and after sufficient soak time to be confident you won't need to roll back), you are free to delete your PodSecurityPolicies and any associated Roles, ClusterRoles, RoleBindings and ClusterRoleBindings (just make sure they don't grant any other unrelated permissions).